1. Introduction
The Kärcher SC 2 Upright EasyFix steam cleaner is designed for comfortable and hygienic steam cleaning of hard floors in your home. This powerful device heats up in just 30 seconds, making it quickly ready for use. It effectively removes dirt and stains from various hard floor surfaces, including parquet, laminate, tile, and stone, ensuring sparkling cleanliness. With its deep cleaning capabilities, the steam cleaner helps eliminate up to 99.999% of viruses and common household bacteria.
This manual provides essential information on the safe and efficient use, setup, operation, and maintenance of your Kärcher SC 2 Upright EasyFix steam cleaner.
2. Safety Information
Always read and understand all safety warnings and instructions before using the appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Do not direct steam at people, animals, or electrical components.
- Ensure the appliance is unplugged before cleaning or performing maintenance.
- Keep children and pets away from the appliance during operation.
- Use only Kärcher original accessories and spare parts.
- Do not operate the appliance if it is damaged.
3. Package Contents
Please check that all items are present upon unpacking:
- Kärcher SC 2 Upright EasyFix Steam Cleaner
- EasyFix Floor Cleaning Kit with Microfiber Mop
- Descaling Cartridge
- User Manual (this document)
4. Setup
4.1 Unpacking and Assembly
Carefully remove all components from the packaging. Assemble the handle to the main unit until it clicks into place.
4.2 Filling the Water Tank
The SC 2 Upright EasyFix features a 0.4-liter water tank with an integrated descaling cartridge. This cartridge automatically descales the water, contributing to a longer device lifespan.
Figure 4.2.1: Hand refilling the water tank. Ensure the tank is filled to the MAX line.
- Open the water tank cap.
- Fill the tank with tap water. The integrated descaling cartridge will handle limescale.
- Close the water tank cap securely.
4.3 Attaching the Microfiber Mop
The microfiber mop is attached to the EasyFix floor nozzle using a convenient Velcro system.
- Place the microfiber mop on the floor with the Velcro side facing up.
- Align the EasyFix floor nozzle with the mop and press down firmly to secure it.
4.4 Powering On and Heating
Connect the power cord to a suitable electrical outlet. The steam cleaner heats up in approximately 30 seconds.
Figure 4.4.1: The device is ready for use after approximately 30 seconds of heating.
An indicator light will signal when the device is ready to produce steam.
5. Operating Instructions
5.1 Selecting Steam Levels
The SC 2 Upright EasyFix offers two steam levels, optimized for different floor types. These can be selected via the control panel on the handle:
- Wood Mode: For sensitive wooden floors and laminate.
- Tile Mode: For robust tiled and stone floors.
Choose the appropriate mode for your floor covering to ensure optimal cleaning and care.
5.2 Cleaning Technique
Once the device is ready, press the steam trigger on the handle to release steam. Move the steam cleaner slowly and evenly over the floor surface.
Figure 5.2.1: Cleaning a tiled floor with the steam cleaner.
The flexible joint on the floor nozzle allows for easy maneuverability, enabling you to reach difficult areas, such as under low furniture.
Figure 5.2.2: The flexible nozzle allows cleaning under furniture.
For refreshing carpets, an optional pad for the floor brush can be used (sold separately).
Figure 5.2.3: General use of the steam cleaner on a wooden floor.
5.3 Refilling During Operation
The water tank can be refilled during operation without interrupting your cleaning task. Simply open the cap and add water as needed.
6. Maintenance
6.1 Changing the Microfiber Mop
Thanks to the Velcro system and a tab, the microfiber mop can be changed without direct contact with dirt. Simply step on the tab and lift the device to detach the mop.
6.2 Descaling
The integrated descaling cartridge automatically treats the water, significantly reducing the need for manual descaling. Replace the descaling cartridge when indicated by the appliance or as per the recommended schedule in the full product manual.
6.3 General Cleaning
Wipe down the exterior of the appliance with a damp cloth. Do not use abrasive cleaners or solvents.
7. Troubleshooting
If you encounter issues with your Kärcher SC 2 Upright EasyFix, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|
| No steam or low steam output | Water tank empty; Appliance not heated up; Nozzle blocked. | Refill water tank; Wait for heating indicator; Clean nozzle. |
| Appliance does not turn on | Power cord not connected; No power from outlet. | Check power cord connection; Test outlet with another device. |
| Water leaking from nozzle | Condensation; Nozzle not properly attached. | This can be normal at start-up; Reattach nozzle securely. |
If the problem persists, please contact Kärcher customer support.
8. Specifications
| Feature | Detail |
|---|
| Model Name | SC 2 Upright EasyFix |
| Item Model Number | 1.513-345.0 |
| Manufacturer | Kärcher |
| Dimensions (L x W x H) | 16.8 x 31.4 x 118.5 cm |
| Weight | 3.22 Kilograms |
| Power | 1600 Watts |
| Voltage | 220 Volts |
| Water Tank Capacity | 0.4 Liters |
| Heating Time | Approx. 30 seconds |
| Surface Coverage per Tank | Up to 50 m² |
| Color | Yellow |
| Form Factor | Upright |
| Surface Recommendation | Tiles (also suitable for wood, laminate, stone) |
9. Warranty and Support
Kärcher provides a commitment to quality and durability. Spare parts for this model are available for up to 5 years from the date of purchase.
For further assistance, technical support, or to purchase accessories and spare parts, please visit the official Kärcher brand store or contact Kärcher customer service:
