Introduction
Thank you for purchasing the Sharper Image CERAMIC 1 Personal Space Heater. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your new heater. Please read all instructions carefully before use and retain this manual for future reference.
Important Safety Information
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- This product is designed to meet U.S. voltage requirements (120 Volts). Using it with external devices that alter or convert voltage or frequency of electricity may cause improper function and will void all warranties.
Image: The CERAMIC 1 heater highlighting its tip-over protection and 2-stage auto shut-off safety features, designed to enhance user safety.
Product Features
- Personal Comfort: Select between two heat settings (Low/800W and High/1,100W) to gently or quickly warm the air around you.
- Safety-Centric: Advanced safety features include a cool-touch case, tip-over protection, and automatic safety shut-off system for worry-free use.
- Touch Controls: Intuitive touch controls allow you to adjust your settings with a single touch.
- Sleek Design: The modern style complements any room.
- Optimum Performance: Ceramic 1 distributes heat quickly and evenly into the room.
Image: The CERAMIC 1 heater positioned on a desk, demonstrating its compact size and highlighting its energy-efficient 800W and 1100W heat settings.
Setup
Unpacking
- Carefully remove the heater from its packaging.
- Retain the packaging for off-season storage or if you need to transport the heater.
- Inspect the heater for any signs of damage. If damaged, do not operate and contact customer support.
Placement
- Place the heater on a firm, level surface.
- Ensure there is at least 3 feet (0.9 meters) of clear space around the heater from walls, furniture, and other objects.
- Do not place the heater directly under a power outlet.
- Avoid placing the heater in high-traffic areas where it could be easily knocked over.
Power Connection
- Plug the power cord directly into a 120V AC, 60Hz wall outlet.
- Do not use extension cords, power strips, or surge protectors with this heater.
Image: The CERAMIC 1 heater shown on a desk, demonstrating suitable placement for personal heating in an office or home environment.
Operating Instructions
The CERAMIC 1 heater features intuitive touch controls for easy operation.
Control Panel Overview
Image: A detailed view of the CERAMIC 1's control panel, showing the power button and buttons for selecting between two heat settings (Low/High).
- Power Button (⏻): Press to turn the heater ON or OFF.
- Heat Setting 1 (❘): Press to activate Low heat (800W).
- Heat Setting 2 (❚): Press to activate High heat (1,100W).
Turning On/Off
- Plug the heater into a suitable electrical outlet.
- Press the Power Button (⏻) to turn the heater ON. The indicator light will illuminate.
- To turn the heater OFF, press the Power Button (⏻) again. The indicator light will turn off.
Selecting Heat Settings
- With the heater ON, press the Heat Setting 1 button (❘) for Low heat (800W).
- Press the Heat Setting 2 button (❚) for High heat (1,100W).
- You can switch between Low and High heat settings by pressing the respective buttons.
Maintenance
Proper maintenance ensures the longevity and efficient operation of your heater.
Cleaning
- Always unplug the heater and allow it to cool completely before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
- For stubborn spots, a mild soap solution can be used, then wipe with a clean, damp cloth.
- Ensure no water or liquid enters the interior of the heater.
- Periodically vacuum the air intake and exhaust grilles to remove dust and lint.
Storage
- When not in use, store the heater in a cool, dry place.
- It is recommended to store the heater in its original packaging to protect it from dust and damage.
Troubleshooting
If your heater is not operating as expected, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power to the unit. | Ensure the power cord is securely plugged into a working 120V outlet. Check the household circuit breaker. |
| Heater turns off unexpectedly. | Tip-over protection activated. | Ensure the heater is on a firm, level surface. If it was tipped, place it upright and it should resume operation. |
| Heater turns off unexpectedly. | Overheat protection activated. | Unplug the heater and allow it to cool for at least 30 minutes. Check for any obstructions to the air intake or exhaust. Ensure proper clearance around the heater. |
| Reduced heat output. | Dust or lint blocking grilles. | Unplug the heater and clean the air intake and exhaust grilles with a vacuum cleaner. |
If the problem persists after trying these solutions, please contact Sharper Image customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | CERAMIC 1 |
| Brand | Sharper Image |
| Power Settings | Low (800W), High (1100W) |
| Voltage | 120 Volts |
| Amperage | 9.17 Amps |
| Product Dimensions (D x W x H) | 3.4" x 8.7" x 5.4" |
| Item Weight | 2.1 pounds |
| Special Features | Corded, Overheat Protection, Tip-Over Protection |
| Room Type | Bedroom, Home Office, Study Room |
| Heating Coverage | 150 square feet |
| Care Instructions | Hand Wipe Clean |
| Included Components | Space Heater, Owner's Guide |
Image: The CERAMIC 1 heater with its key dimensions clearly marked for reference.
Warranty and Support
Manufacturer's Warranty
This Sharper Image CERAMIC 1 Personal Space Heater is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty is void if the product has been damaged by accident, improper handling or operation, shipping damage, abuse, misuse, unauthorized repairs, or attempts to alter the product.
Customer Support
For warranty claims, technical support, or any questions regarding your Sharper Image CERAMIC 1 heater, please contact Sharper Image customer service. Refer to the contact information provided with your purchase or visit the official Sharper Image website for support details.
