BUGANI Shoulder Bluetooth Speaker M110 User Manual

Introduction

Thank you for purchasing the BUGANI Shoulder Bluetooth Speaker M110. This manual provides essential information for setting up, operating, and maintaining your device. Please read it thoroughly before use to ensure optimal performance and longevity of your speaker.

Package Contents

BUGANI Shoulder Bluetooth Speaker M110
USB Charging Cable
User Manual

Product Overview

Familiarize yourself with the components of your BUGANI Shoulder Bluetooth Speaker M110.

BUGANI Shoulder Bluetooth Speaker M110, showing the U-shaped design with speaker grilles and control buttons on the side.

Image: BUGANI Shoulder Bluetooth Speaker M110. This image displays the U-shaped design of the speaker, intended to rest on the shoulders. Visible features include speaker grilles on the top surface and control buttons located on the side for easy access.

Controls and Indicators:

Power Button: Press and hold to turn the speaker on or off.
Volume Up (+): Press to increase volume.
Volume Down (-): Press to decrease volume.
Multi-function Button (MFB): Play/Pause, Answer/End calls.
LED Indicator: Shows power status, charging status, and Bluetooth pairing status.
Charging Port: USB port for charging the speaker.

Setup

1. Charging the Speaker

Connect the small end of the USB charging cable to the charging port on the speaker.
Connect the larger end of the USB charging cable to a USB power adapter (not included) or a computer's USB port.
The LED indicator will illuminate during charging and change color or turn off when fully charged.
A full charge typically takes approximately 2-3 hours.

2. Bluetooth Pairing

Ensure the speaker is fully charged before initial use.
Press and hold the Power Button for 3 seconds to turn on the speaker. The LED indicator will flash, indicating it is in pairing mode.
On your mobile device (smartphone, tablet, etc.), enable Bluetooth.
Search for available Bluetooth devices. Select "BUGANI M110" from the list.
Once paired, the LED indicator will stop flashing and remain solid, and you will hear an audible confirmation.
The speaker will automatically reconnect to the last paired device when turned on, if the device's Bluetooth is active and within range.

Operating Instructions

Power On/Off

Power On: Press and hold the Power Button for 3 seconds.
Power Off: Press and hold the Power Button for 3 seconds.

Volume Control

Increase Volume: Press the Volume Up (+) button.
Decrease Volume: Press the Volume Down (-) button.

Music Playback

Play/Pause: Press the Multi-function Button (MFB) once.
Next Track: Press and hold the Volume Up (+) button.
Previous Track: Press and hold the Volume Down (-) button.

Phone Calls

Answer Call: Press the Multi-function Button (MFB) once when a call comes in.
End Call: Press the Multi-function Button (MFB) once during a call.
Reject Call: Press and hold the Multi-function Button (MFB) for 2 seconds when a call comes in.
Redial Last Number: Double-press the Multi-function Button (MFB).

Care and Maintenance

Cleaning: Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Water Exposure: This speaker is NOT waterproof. Avoid exposure to water or excessive moisture.
Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
Battery Care: To preserve battery life, charge the speaker at least once every three months if not used regularly.
Avoid Impact: Do not drop or subject the speaker to strong impacts.

Troubleshooting

Problem	Solution
Speaker does not turn on.	Ensure the speaker is fully charged. Connect it to a power source using the USB cable.
Cannot pair with Bluetooth device.	Ensure the speaker is in pairing mode (LED flashing). Make sure Bluetooth is enabled on your device. Move the speaker closer to your device. Forget "BUGANI M110" from your device's Bluetooth list and try pairing again. Restart both the speaker and your device.
No sound or low volume.	Increase the volume on both the speaker and your connected device. Ensure the speaker is properly paired. Check if the audio source is playing.
Sound is distorted.	Reduce the volume on both the speaker and your connected device. Move the speaker closer to your device to avoid interference. Check the audio quality of the source file.
Charging port is loose.	Handle the charging port with care. If the port becomes loose or damaged, contact customer support for assistance. Continued use with a damaged port may prevent proper charging.

Specifications

Model Name	M110
Brand	BUGANI
Connectivity Technology	Bluetooth
Speaker Maximum Output Power	10 Watts
Audio Output Mode	Stereo
Speaker Type	3D
Maximum Range	250 Feet
Power Source	Battery Powered
Battery Type	1 A battery (included)
Product Dimensions	7.62 x 7.62 x 7.62 cm (225D x 30W x 220H mm)
Weight	630 g
Is Waterproof	No
Control Method	App (and physical buttons)

Warranty Information

BUGANI products are covered by a limited warranty from the date of purchase. Please refer to the warranty card included in your package or visit the official BUGANI website for detailed warranty terms and conditions. This warranty typically covers manufacturing defects but does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Customer Support

If you encounter any issues or have questions regarding your BUGANI Shoulder Bluetooth Speaker M110, please contact our customer support team. For the most up-to-date contact information, please visit the official BUGANI website or refer to the contact details provided in your product packaging.

Online Support: Visit the BUGANI Store on Amazon

Important Safety Information

Do not expose the speaker to extreme temperatures or humidity.
Do not disassemble or attempt to repair the speaker yourself. This will void the warranty.
Keep the speaker away from children and pets.
Dispose of the battery according to local regulations. Do not dispose of it in household waste.
Avoid listening at high volumes for extended periods to prevent hearing damage.

BUGANI M110