1. Introduction
This manual provides essential information for the safe and efficient use of your mabe MCL2040ESBB0 Electric Washer Dryer Combo. Please read these instructions carefully before operating the appliance and retain them for future reference. This appliance combines a 20 kg capacity washer with an electric dryer, designed for household laundry needs.
Image 1.1: Front view of the mabe MCL2040ESBB0 Electric Washer Dryer Combo. This appliance features a top-loading washer and a front-loading electric dryer, stacked vertically.
2. Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury to persons. This appliance's electric dryer system requires a 220V electrical connection. Do not attempt to connect the dryer to a 110V outlet. Professional installation is recommended for electrical connections.
- Read all instructions before using the appliance.
- Ensure the appliance is properly grounded.
- Do not operate the appliance if it is damaged.
- Keep flammable materials away from the appliance.
- Supervise children when the appliance is in use.
3. Setup and Installation
3.1 Unpacking
Carefully remove all packaging materials from the appliance. Inspect for any shipping damage. Retain packaging for potential future transport.
3.2 Location Requirements
Place the appliance on a firm, level floor. Ensure adequate clearance around the unit for ventilation and maintenance. The dimensions of the unit are approximately 69.09 cm (depth) x 76.71 cm (width) x 191.01 cm (height).
Image 3.1: Dimensional diagram of the washer dryer combo. The unit measures approximately 68.0 cm wide, 75.5 cm deep, and 188.0 cm high, with a total weight of 112.0 kg.
3.3 Electrical Connection
The electric dryer system of this appliance requires a 220V electrical supply. It does not come with a standard 110V plug and must be directly connected to a 220V electrical installation by a qualified professional. Attempting to use the dryer with a 110V connection will result in malfunction and potential damage.
3.4 Water Connection
Connect the hot and cold water supply hoses to the designated inlets on the back of the washer. Ensure all connections are tight to prevent leaks. The drain hose should be securely placed in a standpipe or laundry tub.
4. Operating Instructions
4.1 Control Panel Overview
The control panel features separate dials for washer and dryer functions, along with buttons for specific settings. Familiarize yourself with the layout before use.
Image 4.1: Detailed view of the control panel. On the left are washer controls for cycles, water levels, and temperature. On the right are dryer controls for cycles and time. The center features the mabe logo and additional settings.
4.2 Washing Cycles
The washer offers 8 automatic programs:
- Sanitize: For heavily soiled items requiring high temperatures.
- Delicate Clothes: Gentle wash for fragile garments.
- White Clothes: Optimized for white fabrics.
- Color Clothes: Designed to protect colored garments.
- Bulky Items: For large items like blankets or comforters.
- Spin Only: Removes excess water from clothes.
- Extended Wash: For extra soiled loads.
- Express: Quick wash cycle for lightly soiled items.
Additional settings include 4 automatic water levels, 5 automatic temperature levels, an Eco function, and a stage selection option. The washer features a Sphere Care stainless steel basket and a lid safety lock.
4.3 Drying Cycles
The electric dryer provides 4 timer-based drying cycles. Select the appropriate time based on the load size and fabric type. The dryer also includes a temperature sensor and a lint filter.
4.4 Starting a Cycle
- Load laundry into the washer.
- Add detergent and fabric softener as needed.
- Select the desired wash program, water level, and temperature.
- Close the washer lid securely.
- Press the Start button.
- Once washing is complete, transfer items to the dryer.
- Select the desired drying time and cycle.
- Press the Start button for the dryer.
5. Maintenance and Care
5.1 Cleaning the Lint Filter
Regularly clean the lint filter located in the dryer section. A clogged lint filter can reduce drying efficiency and increase the risk of fire. Remove lint after every load.
5.2 General Cleaning
Wipe down the exterior of the appliance with a soft, damp cloth. Do not use abrasive cleaners. For the stainless steel washer basket, use a non-abrasive cleaner designed for stainless steel.
5.3 Water Inlet Filters
Periodically check and clean the screens in the water inlet hoses to prevent blockages.
6. Troubleshooting
Before contacting service, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not start or operate. | No power supply; incorrect electrical connection (110V instead of 220V for dryer); lid not closed. | Check power cord and circuit breaker. Ensure appliance's dryer is connected to a 220V outlet. Close washer lid securely. |
| Washer not filling with water. | Water supply valves closed; inlet hoses kinked; water pressure too low. | Open water supply valves. Straighten hoses. Check household water pressure. |
| Dryer not drying effectively. | Lint filter clogged; exhaust vent blocked; incorrect cycle selection. | Clean lint filter. Check and clear exhaust vent. Select appropriate drying cycle and time. |
| Excessive vibration or noise. | Appliance not level; load unbalanced. | Adjust leveling feet. Redistribute laundry in the washer. The auto-balance suspension system helps, but severe unbalance can still cause issues. |
7. Specifications
- Brand: mabe
- Model Number: MCL2040ESBB0
- Color: White
- Product Dimensions (D x W x H): 69.09 cm x 76.71 cm x 191.01 cm
- Capacity: 20 Kilograms (Washer)
- Voltage: Washer operates at 120V; Electric Dryer system requires 220V. The combined unit requires a 220V electrical connection for full functionality.
- Material: Stainless Steel (Basket)
- Annual Consumption: 1000 Kilowatts
- Noise Level: 50 Decibels
- Special Features: End-of-cycle signal, Auto-balance suspension system
- Product Weight: 112 Kilograms
- Washer Cycles: 8 automatic programs (Sanitize, Delicate, White, Color, Bulky, Spin, Extended Wash, Express)
- Water Levels: 4 automatic
- Temperature Levels: 5 automatic
- Dryer Cycles: 4 timer cycles
- Dryer System: Electric, 220V
8. Warranty and Support
For technical assistance, repairs, or to schedule maintenance for your mabe product, please contact mabe service directly. It is recommended to contact them to arrange any required service.
Image 8.1: Mabe Service contact details. For installation, repair, and maintenance, contact Mabe. Telephone: 461 471 7000. WhatsApp: 55 41635939.
Please have your model number (MCL2040ESBB0) and purchase date available when contacting support.
You can also visit the official mabe store for more information: mabe Official Store