1. Introduction
This manual provides essential information for the safe and efficient use of your Arcchio LED Logan Floor Lamp. Please read these instructions carefully before installation and operation, and retain them for future reference.
The Arcchio LED Logan Floor Lamp is a modern lighting solution designed for both home and office environments. It features advanced technology including a daylight sensor, motion sensor, and an integrated dimmer to provide optimal and energy-efficient illumination.

Figure 1: Arcchio LED Logan Floor Lamp in an office environment.
2. Safety Instructions
- Ensure the power supply is disconnected before installation, cleaning, or maintenance.
- This product is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
- Only use the lamp with the specified voltage (230V).
- Do not attempt to modify or repair the lamp. Contact qualified personnel for service.
- Keep packaging materials out of reach of children.
- Avoid direct eye exposure to the LED light source.
3. Package Contents
Verify that all components are present and undamaged:
- Arcchio LED Logan Floor Lamp (main unit)
- Integrated LED light source
- Power cable with plug
- Instruction Manual (this document)
4. Setup
The Arcchio LED Logan Floor Lamp is designed for straightforward assembly. Follow these steps for proper setup:
- Unpack: Carefully remove all components from the packaging. Retain packaging for potential future transport or returns.
- Positioning: Place the lamp base on a flat, stable surface. Ensure the power cable can reach a suitable wall outlet without tension. The lamp's dimensions are 61 cm (length) x 28 cm (width) x 195 cm (height).
- Connect Power: Insert the power plug into a grounded 230V electrical outlet.
- Initial Check: Once connected, the lamp is ready for operation.

Figure 2: Product dimensions for optimal placement.

Figure 3: Lamp base and power cable connection.
5. Operating Instructions
The Arcchio LED Logan Floor Lamp offers several intelligent features for customized lighting.
5.1. Manual On/Off Switch
The lamp is equipped with a manual switch for basic power control. Locate the switch on the lamp's pole to turn the light on or off.
5.2. Integrated Dimmer (0-10V)
Adjust the brightness of the lamp using the integrated rotary dimmer located on the lamp's pole. Rotate the knob clockwise to increase brightness and counter-clockwise to decrease it.

Figure 4: Adjusting the integrated dimmer.
5.3. Motion Sensor
The integrated motion sensor automatically detects presence within an 85-degree detection angle. If no movement is detected for 30 minutes, the lamp will automatically switch off to save energy. The light will reactivate upon detecting movement.

Figure 5: Lamp head with integrated sensors.
5.4. Daylight Sensor
The daylight sensor continuously adjusts the lamp's brightness based on ambient light conditions. This ensures a consistent and comfortable light level in your workspace throughout the day, optimizing energy consumption.
6. Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the lamp. Do not use abrasive cleaners or solvents.
- Light Source: The LED light source is integrated and not user-replaceable. If the LEDs fail, contact customer support.
- Inspection: Periodically check the power cable and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. Manual switch is off. | Check if the power plug is securely inserted and the outlet is functional. Ensure the manual switch is in the 'on' position. |
| Light output is too dim or too bright. | Dimmer setting. Daylight sensor adjustment. | Adjust the rotary dimmer to your desired brightness. The daylight sensor automatically adjusts brightness; ensure no obstructions are blocking the sensor. |
| Lamp turns off unexpectedly. | Motion sensor activated (no movement detected). | The motion sensor turns off the lamp after 30 minutes of inactivity. Movement will reactivate it. |
| Flickering light. | Unstable power supply. Internal fault. | Ensure the power supply is stable. If flickering persists, discontinue use and contact customer support. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Arcchio customer support.
8. Specifications
| Brand | Arcchio |
| Model Number | 9968058 |
| Dimensions (L x W x H) | 61 x 28 x 195 cm |
| Weight | 12 kg |
| Material | Aluminum, Plastic |
| Color | Silver (RAL 9006) |
| Voltage | 230 V |
| Wattage | 72 W |
| Luminous Flux | 10000 Lumen |
| Color Temperature | 4000 Kelvin (Universal White) |
| Light Direction | Direct and Indirect (equal proportions) |
| Special Features | Motion Sensor, Daylight Sensor, Dimmable (0-10V) |
| Motion Sensor Detection Angle | 85° |
| Motion Sensor Light Duration | 30 minutes (after no movement) |
| IP Code | IP20 (Indoor use only) |
| UGR (Unified Glare Rating) | <17 (Ideal for computer workstations) |
| Energy Efficiency Class | D |

Figure 6: Energy Efficiency Label. For more details, visit eprel.ec.europa.eu/qr/744432.
9. Warranty and Support
Arcchio products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official Arcchio website.
If you require technical assistance, have questions about your product, or need to report a defect, please contact Arcchio customer support.
- Manufacturer: Arcchio
- Website: www.arcchio.com (Note: This is a placeholder URL, please refer to your product documentation for the correct support contact.)