Lucande Hayley 5-Light LED Glass Pendant Light Instruction Manual

Introduction

Thank you for choosing the Lucande Hayley 5-Light LED Glass Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Important Safety Instructions

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

• Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
• Ensure the main power supply is switched off at the circuit breaker or fuse box before commencing installation.
• Do not connect the fixture to an ungrounded electrical system.
• Handle glass components with care to prevent breakage and injury.
• Do not exceed the specified wattage for replacement bulbs (if applicable). This fixture uses integrated LEDs.
• Keep packaging materials out of reach of children.
• This fixture is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.

Package Contents

Carefully unpack the fixture and inspect all components for damage. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• 1 x Lucande Hayley 5-Light LED Glass Pendant Light fixture
• 5 x Integrated LED light sources
• Mounting hardware (screws, anchors, wire connectors)
• Instruction Manual (this document)

Image: Overview of the Lucande Hayley 5-Light LED Glass Pendant Light.

Installation Instructions

Follow these steps carefully to install your pendant light. Professional installation is recommended.

1. Prepare for Installation:
   • Turn off the electricity at the main fuse box or circuit breaker.
   • Ensure the power is off before touching any electrical wires.
   • Gather necessary tools: screwdriver, wire strippers, drill, ladder.
2. Mount the Ceiling Plate:
   • Position the mounting bracket (part of the ceiling plate) over the junction box in your ceiling.
   • Mark the drilling points for the mounting screws.
   • Drill pilot holes if necessary and insert wall anchors (if mounting to drywall).
   • Secure the mounting bracket to the ceiling using the provided screws.
   

   Image: Detail of the ceiling plate for mounting.

3. Connect Electrical Wires:
   • Carefully connect the fixture's wires to your household electrical wires.
   • Connect the live (L) wire from the fixture to the live (L) wire from the ceiling.
   • Connect the neutral (N) wire from the fixture to the neutral (N) wire from the ceiling.
   • Connect the ground (E) wire from the fixture to the ground (E) wire from the ceiling.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Attach the Fixture Body:
   • Carefully lift the fixture body and align it with the mounting bracket.
   • Secure the fixture body to the mounting bracket using the provided screws or fasteners.
5. Adjust Pendant Height:
   • The height of each glass sphere can be adjusted. Gently push the cable into the ceiling plate to shorten, or pull it out to lengthen. Ensure the cables are securely locked in place after adjustment.
   

   Image: Cable adjustment point on the ceiling plate.

6. Install Glass Spheres:
   • Ensure the integrated LED light sources are properly seated within each glass sphere.
   • Carefully attach the glass spheres to the pendant cables.
   

   Image: Detail of a single glass sphere with internal bubbles.

7. Restore Power:
   • Once installation is complete and all connections are secure, restore power at the main circuit breaker.
   • Test the light fixture.

Operating Instructions

The Lucande Hayley pendant light is designed for simple operation.

• Power On/Off: Control the light using your standard wall switch.
• Dimming (if applicable): The product specifications mention "Méthode de contrôle: Tactile" (Touch control). If your wall switch is a compatible dimmer switch, the integrated LEDs may be dimmable. Consult a qualified electrician for dimmer compatibility.

Care and Maintenance

Proper care will ensure the longevity and appearance of your Lucande Hayley pendant light.

• Cleaning:
  • Always disconnect power before cleaning.
  • Wipe the metal and glass surfaces with a soft, dry, or slightly damp cloth.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Avoid spraying cleaning solutions directly onto the fixture.
• LED Replacement: The fixture uses integrated LED light sources. These are designed for long life and are generally not user-replaceable. If an LED fails, contact customer support for assistance.

Troubleshooting

If you encounter issues with your pendant light, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact Lucande customer support.

Product Specifications

Image: Energy Efficiency Label (Class E).

For more details, visit the EU EPREL database: https://eprel.ec.europa.eu/qr/744688

Warranty Information

This Lucande product comes with a limited warranty. Please refer to the terms and conditions provided at the time of purchase or contact Lucande customer support for specific details regarding your warranty coverage.

Customer Support

If you have any questions, require technical assistance, or need to report a problem with your Lucande Hayley pendant light, please contact Lucande customer support through your Amazon purchase platform or visit the official Lucande website.

For direct inquiries, you may also refer to the seller "Lampenwelt" on Amazon.

Lucande - Your home, your light!