1. Product Overview
The Arcchio 'Ismera' outdoor wall light is designed with a modern, linear aesthetic, featuring a die-cast aluminium frame and clear glass panels. This design allows light to escape to all sides, providing effective illumination for exterior and interior walls, houses, terraces, and balconies. It is compatible with an E27 bulb (not included) and is dimmable, offering flexibility in lighting ambiance.
Image: The Arcchio 'Ismera' outdoor wall light, showcasing its modern design with a clear glass enclosure and an exposed E27 bulb.
2. Safety Information
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Installation should only be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- IP65 Rating: This product is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. While suitable for outdoor use, ensure all connections are properly sealed during installation to maintain this rating.
- Bulb Compatibility: Use only E27 bulbs with a maximum wattage of 20W. Ensure the bulb is suitable for dimming if you intend to use the dimmable feature.
- Handling: Handle the light fixture and glass components with care to prevent breakage.
- Disposal: Dispose of old light bulbs and packaging materials responsibly, following local recycling guidelines.
3. Package Contents
Verify that all components are present and undamaged before beginning installation:
- Arcchio 'Ismera' Outdoor Wall Light Fixture
- Dimmer (integrated or compatible component)
- Socket (E27)
- Mounting hardware (screws, wall plugs - typically included, though not explicitly listed in "whats_in_the_box", it's standard for light fixtures)
- Note: Lightbulb is not included and must be purchased separately.
Image: Exploded view of the Arcchio 'Ismera' wall light, showing the main housing, mounting plate, and glass enclosure, indicating components for assembly.
4. Setup and Installation
Tools Required: Screwdriver, drill, wire strippers, voltage tester, pencil, measuring tape.
- Prepare for Installation:
- Turn off the main power supply to the installation area at the circuit breaker. Verify power is off using a voltage tester.
- Carefully unpack the light fixture and inspect for any damage.
- Mark Mounting Position:
- Determine the desired mounting location on the wall. Consider the light's dimensions (Height: 25.5 cm, Width: 13 cm, Depth: 11.5 cm) for proper placement.
- Use the mounting plate as a template to mark the drill holes on the wall.
- Mount the Fixture Base:
- Drill holes at the marked positions and insert appropriate wall plugs (if necessary).
- Secure the mounting plate to the wall using the provided screws. Ensure it is firmly attached.
- Wire the Fixture:
- Connect the household electrical wires to the fixture's wires according to standard wiring practices (Live to Live, Neutral to Neutral, Earth to Earth). Use appropriate wire connectors.
- Ensure all connections are secure and insulated.
- Attach the Light Body:
- Carefully align the light fixture body with the mounted base and secure it using the provided screws or fasteners.
- Ensure the fixture is flush against the wall and all seals are properly seated to maintain the IP65 rating.
- Install the Lightbulb:
- Insert an E27 bulb (max 20W) into the socket.
- Attach the clear glass enclosure to the fixture, ensuring it is securely fastened.
- Test Operation:
- Restore power at the main circuit breaker.
- Test the light to ensure it functions correctly.
Image: Diagram showing the dimensions of the Arcchio 'Ismera' wall light: 255mm height, 130mm width, and 115mm depth.
Image: The Arcchio 'Ismera' wall light installed on an exterior wall next to a door, demonstrating its appearance in a typical setting.
5. Operating Instructions
The Arcchio 'Ismera' wall light operates like a standard light fixture once installed. It is designed to be dimmable, allowing for adjustable light intensity.
- Turning On/Off: Use your existing wall switch to turn the light fixture on or off.
- Dimming Function: If connected to a compatible dimmer switch and equipped with a dimmable E27 bulb, you can adjust the light output by operating the dimmer switch. Ensure the bulb used is explicitly rated as dimmable for optimal performance.
6. Maintenance
Regular maintenance will help prolong the life and appearance of your 'Ismera' wall light.
- Cleaning:
- Before cleaning, ensure the power supply to the fixture is turned off.
- Wipe the aluminium frame with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Clean the glass panels with a glass cleaner and a soft cloth.
- Bulb Replacement:
- Always turn off the power supply before replacing the bulb.
- Allow the old bulb to cool down before handling.
- Unscrew the old E27 bulb and screw in a new E27 bulb (max 20W).
- Ensure the new bulb is securely seated before restoring power.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.
7. Troubleshooting
If you encounter issues with your 'Ismera' wall light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Loose wiring. Faulty bulb. |
Check circuit breaker. Verify all wire connections are secure (with power off). Replace bulb with a known working one. |
| Light flickers or dims incorrectly. | Incompatible dimmer switch. Non-dimmable bulb. Loose bulb connection. |
Ensure dimmer switch is compatible with LED/dimmable bulbs. Use a dimmable E27 bulb. Tighten the bulb in the socket. |
| Water inside the fixture. | Improper sealing during installation. Damage to fixture. |
Ensure all seals and gaskets are correctly seated and tightened. Re-seal if necessary. If damaged, replace the fixture. |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Arcchio |
| Model Number | 9969185 |
| Manufacturer | Lampenwelt |
| Material | Aluminium (Frame), Glass (Shade) |
| Colour | Silver / Dark Grey |
| Product Dimensions (L x W x H) | 11.5 x 13 x 25.5 cm |
| Item Weight | 2.08 kg |
| Socket Type | E27 |
| Max. Wattage | 1 x 20 W |
| Operating Voltage | 230 V |
| IP Code | IP65 |
| Protection Class | I |
| Special Features | Dimmable |
| Included Components | Dimmer, Socket |
Image: Certification marks (UKCA, CE, WEEE, electrical safety) and EAN (4251096589405) for the Arcchio Ismera light.
9. Warranty and Support
For warranty information and customer support, please contact the seller or manufacturer, Lampenwelt. Keep your proof of purchase for any warranty claims.
Manufacturer: Lampenwelt
For further assistance or technical inquiries, refer to the contact information provided with your purchase or visit the official Arcchio/Lampenwelt website.