Introduction
Thank you for choosing the Lucande Fiola Outdoor Luminaire. This modern and decorative path light is designed to provide ample illumination for your garden and outdoor spaces. Featuring a durable aluminum construction, an E27 socket for a single bulb, and an IP54 protection rating, the Fiola luminaire is built for outdoor use. Please read this manual carefully before installation and operation to ensure safe and optimal performance of your product.

The Lucande Fiola Outdoor Luminaire providing illumination in a garden setting.
Safety Information
Always observe general safety precautions when working with electrical products. Incorrect installation or use can lead to serious injury or damage. For detailed safety guidelines, please refer to the official safety document provided by Lucande:
Important Safety Notes:
- Ensure the power supply is disconnected before any installation, maintenance, or bulb replacement.
- This product is designed for outdoor use with an IP54 rating, protecting against dust and splashing water.
- Installation should be performed by a qualified electrician to ensure compliance with local electrical codes.
- Do not exceed the maximum wattage specified for the bulb.
Package Contents
Please check that all components are present and undamaged:
- 1 x Lucande Fiola Outdoor Luminaire
- 1 x E27 Bulb (included)
- Mounting hardware (screws, anchors)
- Instruction Manual
Specifications
| Brand | Lucande |
| Model Name | Fiola |
| Model Number | 9617048 |
| Dimensions (L x W x H) | 13 cm x 13 cm x 80 cm |
| Material | Aluminum, Polycarbonate (PC) |
| Color | Anthracite, Transparent |
| Bulb Base | E27 |
| Number of Bulbs | 1 |
| Max Wattage | 23 Watts |
| Voltage | 230 Volts |
| IP Rating | IP54 |
| Control Method | Tactile (Dimmable Function) |

Dimensions of the Fiola Outdoor Luminaire.
Setup and Installation
Professional installation by a qualified electrician is highly recommended for this product.
- Unpack: Carefully remove all components from the packaging. Inspect for any damage.
- Choose Location: Select a suitable outdoor location for the luminaire, ensuring it is on a stable surface and has access to the necessary electrical wiring.
- Prepare Wiring: Disconnect the main power supply before proceeding. Open the base of the luminaire to access the wiring terminals. Connect the electrical cables according to local regulations and the wiring diagram provided with the product. Ensure all connections are secure and properly insulated.

Internal wiring and base connection points of the luminaire.
- Mount the Luminaire: Secure the luminaire base to the chosen surface using the provided mounting hardware. Ensure it is firmly attached and stable.
- Install Bulb: Carefully screw the E27 bulb into the lamp holder. Do not overtighten.

E27 bulb socket for installation.
- Secure Cover: Reattach any covers or protective elements securely to maintain the IP54 rating.
- Restore Power: Once installation is complete and all connections are checked, restore power to the circuit.
Operating Instructions
The Lucande Fiola Luminaire is designed for straightforward operation:
- Power On/Off: Once installed and connected to the main power supply, the luminaire can be switched on or off via its tactile control or an external wall switch, if connected.
- Dimmable Function: The luminaire supports dimmable E27 bulbs and features a tactile control for adjusting light intensity. Consult the bulb's instructions for specific dimming capabilities.
- Bulb Type: Use only E27 bulbs with a maximum wattage of 23W.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your luminaire:
- Cleaning: Disconnect power before cleaning. Wipe the luminaire with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or polycarbonate cover.
- Bulb Replacement: Disconnect power before replacing the bulb. Allow the old bulb to cool completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 23W). Ensure the new bulb is securely screwed in.
- Inspection: Periodically check the luminaire for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
If you encounter issues with your Lucande Fiola Luminaire, try the following steps:
- Light Not Turning On:
- Check if the power supply to the luminaire is active.
- Ensure the bulb is correctly installed and not faulty. Try replacing the bulb.
- Verify all electrical connections are secure.
- Light Flickers or Dims Incorrectly:
- Ensure the bulb is compatible with dimming functions if you are using the dimmable feature.
- Check for loose connections.
- Water Inside Luminaire:
- Immediately disconnect power.
- Check if all covers and seals are properly secured to maintain the IP54 rating.
- If the issue persists, contact customer support.
If these steps do not resolve the issue, please contact Lucande customer support.
Warranty and Support
Lucande products are known for their high quality and customer satisfaction. If you have any questions about your Fiola Outdoor Luminaire or require technical assistance, please do not hesitate to contact Lucande directly through their official Amazon store or customer service channels.
Please retain your proof of purchase for warranty claims.

