1. Safety Instructions
Please read these instructions carefully before installation and use. Keep this manual for future reference.
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or cleaning.
- Handling: The lamp weighs approximately 1.12 kg. It is recommended that two people handle the lamp during installation to ensure safety and ease of mounting.
- Indoor Use Only: This product is designed for indoor use (IP20 protection class). Do not expose to moisture or direct water spray.
- Voltage: Ensure the supply voltage matches the lamp's specified voltage (230V).
- Light Source: The integrated LED light source is not replaceable by the user. Do not attempt to open or modify the lamp.
2. Product Overview
The Arcchio Jelle LED Wall Lamp is a modern indoor lighting fixture designed to provide ambient light. Its organic shape and white finish, made from aluminum and zinc, make it suitable for various living spaces.
Image 2.1: The Arcchio Jelle LED Wall Lamp, showcasing its illuminated appearance and modern design.
Components:
- Lamp body (aluminum/zinc, white finish)
- Integrated LED light source (1 x 12.5W)
- Mounting bracket
- Wiring terminals
Image 2.2: Dimensions of the Arcchio Jelle LED Wall Lamp, showing a width of 44 cm, height of 10 cm, and depth of 6 cm.
3. Setup and Installation
Important: Ensure power is disconnected at the main circuit breaker before beginning installation.
- Prepare the Installation Area: Choose a suitable indoor location on a wall. Ensure the wall material can support the lamp's weight (approx. 1.12 kg).
- Mark Drilling Points: Hold the mounting bracket against the wall at the desired installation height. Use a pencil to mark the drilling points.
- Drill Holes: Drill holes at the marked points. Insert appropriate wall plugs if necessary (not included).
- Mount the Bracket: Secure the mounting bracket to the wall using screws.
- Connect Wiring: Carefully connect the electrical wires from the wall to the lamp's terminals. Ensure correct polarity (Live, Neutral, Earth). Refer to the wiring diagram if provided with the product.
Image 3.1: View of the internal wiring and mounting bracket of the Arcchio Jelle LED Wall Lamp, illustrating connection points.
- Attach the Lamp Body: Carefully align the lamp body with the mounting bracket and secure it. This step is easier with two people.
- Restore Power: Once the lamp is securely installed and all connections are checked, restore power at the main circuit breaker.
4. Operating Instructions
The Arcchio Jelle LED Wall Lamp operates via a standard wall switch. Once installed and connected to the mains power supply, simply use the wall switch to turn the lamp on or off.
- Switch On: Flip the wall switch to the 'ON' position. The integrated LED light will illuminate.
- Switch Off: Flip the wall switch to the 'OFF' position. The LED light will turn off.
5. Maintenance
To ensure the longevity and appearance of your Arcchio Jelle LED Wall Lamp, follow these simple maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Wipe the lamp's surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Light Source: The LED light source is integrated and designed for a long lifespan. It is not user-replaceable. Do not attempt to disassemble the lamp to access the LEDs.
- Inspection: Periodically check the lamp for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
6. Troubleshooting
If you encounter any issues with your Arcchio Jelle LED Wall Lamp, refer to the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. | Check if the main circuit breaker is on. Ensure the wall switch is in the 'ON' position. |
| Loose wiring connection. | Disconnect power at the circuit breaker. Check all wiring connections for tightness. If unsure, consult a qualified electrician. | |
| Light is dim or flickers. | Incorrect voltage. | Ensure the lamp is connected to a 230V supply. |
| Faulty LED driver. | Contact customer support or a qualified electrician. The LED driver is an internal component. |
If the problem persists after following these steps, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Arcchio |
| Model Number | 9626365 |
| Manufacturer | Lampenwelt |
| Dimensions (L x W x H) | 9.5 cm x 44 cm x 10 cm |
| Weight | 1.12 Kilograms |
| Color | White |
| Material | Metal (Aluminum/Zinc) |
| Number of Light Sources | 1 |
| Voltage | 230 Volts |
| Wattage | 12.5 Watts |
| Power Source | Mains Powered |
| Special Features | Energy-saving, Low voltage |
| Batteries Required | No |
| Protection Class | IP20 (Indoor use) |
| Safety Class | I |
Energy Efficiency Information:
Image 7.1: Energy Efficiency Label for the lamp, indicating Class E with 11 kWh/1000h consumption.
For more details, visit the EPREL database (QR/744928).
8. Warranty and Support
Specific warranty information may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for details regarding warranty coverage.
For technical support or inquiries not covered in this manual, please contact Arcchio customer service or the retailer from whom you purchased the product.