Arcchio Karam LED Wall Lamp Instruction Manual

1. Introduction

Thank you for choosing the Arcchio Karam LED Wall Lamp. This modern, black and gold aluminum fixture is designed to provide efficient and atmospheric lighting for indoor spaces such as living rooms, dining rooms, hallways, kitchens, and bathrooms. Featuring integrated LED technology, it offers a pleasant up and down light distribution and is dimmable with a suitable external triac dimmer. Please read this manual carefully before installation and use to ensure safe and optimal operation.

Figure 1: Arcchio Karam LED Wall Lamp installed in a modern living room setting.

2. Safety Instructions

Electrical Safety: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply before installation, maintenance, or cleaning.
Indoor Use Only: This product is rated IP20 and is suitable for dry indoor environments only. Do not expose to water or high humidity.
Protection Class I: This luminaire requires a protective earth connection. Ensure proper grounding during installation.
Integrated LED: The LED light source is integrated and not user-replaceable. Do not attempt to open or modify the light source.
Dimming: Use only a compatible external triac dimmer (phase cut-off recommended) for dimming functionality.
Handling: Handle the lamp with care to avoid damage. Do not apply excessive force.
Cleaning: Clean only with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Package Contents

Carefully unpack the box and ensure all components are present and undamaged.

Arcchio Karam LED Wall Lamp (with integrated LED light source)
Mounting bracket
Mounting hardware (screws, wall plugs) - typically included, verify upon unpacking
Instruction Manual (this document)

Exploded view of Arcchio Karam LED Wall Lamp components

Figure 2: Exploded view of the Arcchio Karam LED Wall Lamp, showing the main housing, integrated LED, and mounting bracket.

4. Setup and Installation

Important: Ensure the main power supply is switched off at the circuit breaker before beginning installation.

Prepare the Installation Area: Choose a suitable indoor wall location. Ensure there are no hidden electrical wires or pipes in the wall where you plan to drill.
Remove Mounting Bracket: Carefully detach the mounting bracket from the lamp housing. This is usually secured with small screws on the side or back.

Mounting bracket for Arcchio Karam LED Wall Lamp

Figure 3: Detached mounting bracket.

Mark Drilling Points: Hold the mounting bracket against the wall at the desired installation height. Use a pencil to mark the positions for drilling holes.
Drill Holes: Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert the provided wall plugs into the drilled holes.
Secure Mounting Bracket: Attach the mounting bracket to the wall using the provided screws. Ensure it is firmly secured.
Electrical Connection: Connect the mains electrical wires to the terminal block inside the lamp housing.
- Connect the Live (L) wire (usually brown or black) to the terminal marked 'L'.
- Connect the Neutral (N) wire (usually blue) to the terminal marked 'N'.
- Connect the Earth (PE) wire (usually green/yellow) to the terminal marked with the earth symbol (⚡).
Ensure all connections are tight and secure.

Internal wiring diagram for Arcchio Karam LED Wall Lamp

Figure 4: Internal wiring connections. Ensure Live, Neutral, and Earth wires are correctly connected.

Attach Lamp Housing: Carefully align the lamp housing with the mounting bracket and secure it using the screws removed earlier. Ensure no wires are pinched.
Restore Power: Once the lamp is securely installed and wired, restore power at the main circuit breaker.

5. Operating Instructions

Switching On/Off: The Arcchio Karam LED Wall Lamp is operated via a standard wall switch connected to your mains power supply.
Dimming Function: If you have installed a compatible external triac dimmer (phase cut-off recommended) in your electrical circuit, you can adjust the brightness of the lamp using the dimmer switch. Follow the instructions provided with your dimmer for its specific operation.

6. Maintenance

Cleaning: To clean the lamp, ensure the power is switched off. Use a soft, dry, lint-free cloth to gently wipe the surfaces. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the finish.
Light Source: The LED light source is integrated and designed for a long lifespan. It is not user-replaceable. If the light source fails, the entire fixture must be replaced.
Inspection: Periodically check the lamp for any signs of damage or loose connections. If any issues are found, switch off the power and consult a qualified electrician.

7. Troubleshooting

Problem	Possible Cause	Solution
Lamp does not light up.	No power supply. Loose electrical connection. Faulty wall switch.	Check the main circuit breaker and wall switch. Ensure all electrical connections are secure (power off before checking). Test the wall switch with another appliance or consult an electrician.
Lamp flickers or dims inconsistently.	Incompatible dimmer. Loose wiring connection.	Ensure you are using a compatible triac dimmer (phase cut-off recommended). Check electrical connections (power off before checking).
Lamp is damaged.	Physical impact or manufacturing defect.	Do not attempt to repair. Contact your retailer or a qualified electrician for assistance.

8. Specifications

Brand	Arcchio
Model Number	9626362
Dimensions (L x W x H)	53 cm x 10 cm x 8 cm (20.9 x 3.9 x 3.1 inches)
Weight	1.39 kg (3.06 lbs)
Material	Aluminum, Iron
Color	Black (exterior), Gold (interior)
Light Source	Integrated LED
Total Wattage	13.7 W (or 15 W, as per energy label)
Luminous Flux	1690 Lumen
Color Temperature	3000 Kelvin (Warm White)
Voltage	230 V
IP Rating	IP20 (Indoor use only)
Protection Class	I (Requires Earth Connection)
Dimmable	Yes, via external triac dimmer (phase cut-off recommended)
Specific Use	Living room, dining room, hallway, kitchen, bathroom (indoor)
Energy Efficiency Class	F (New Label) / A (Old Label)

Dimensions of the Arcchio Karam LED Wall Lamp: 530mm width, 80mm height, 100mm depth.

Figure 5: Product dimensions.

New energy efficiency label for the Arcchio Karam LED Wall Lamp, showing class F and 15 kWh/1000h.

Figure 6: New EU Energy Label (Class F, 15 kWh/1000h). For more details, visit EPREL Database.

Old energy efficiency label for the Arcchio Karam LED Wall Lamp, showing class A to G scale.

Figure 7: Old EU Energy Label (Class A on A++ to E scale).

9. Warranty and Support

Arcchio products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or inquiries, please contact your point of purchase or visit the official Arcchio website.

Arcchio 9626362