1. Product Overview
The Target Darts Arc Light system is designed to provide optimal illumination for your dartboard when housed within a cabinet. This compact LED lighting system offers perfect lighting for your board without any fuss, ensuring consistent board lighting regardless of room conditions. Its innovative design allows for the cabinet doors to be closed even when the light is installed.
Image: The Arc Light system installed above a dartboard in a cabinet, providing bright illumination.
2. Package Contents
Please verify that all the following components are included in your package:
- 1 x Arc Light
- 1 x Arc Arm
- 1 x 3M Adhesive Cabinet Fitting System
Image: All components of the Arc Light system laid out, showing the light bar, the arm, and the adhesive pad.
3. Setup and Installation
Follow these steps for proper installation of your Arc Light System:
- Prepare the Cabinet: Ensure the top surface of your dartboard cabinet is clean, dry, and free from dust or debris. This will ensure optimal adhesion.
- Attach the Arc Arm: The Arc Arm is designed to attach to the top of your cabinet. Peel the backing from the 3M adhesive pad and firmly press the Arc Arm onto the center top edge of your dartboard cabinet. Apply firm pressure for several seconds to ensure a strong bond.
- Secure the Arc Light: Slide the Arc Light onto the Arc Arm until it clicks securely into place. Ensure it is fully seated and stable.
Image: A side view demonstrating how the Arc Light system sits on top of a dartboard cabinet.
Image: An overhead view showing the Arc Light connected to its arm, ready for installation.
- Power Connection: Plug the power supply into a suitable electrical outlet. The light will illuminate automatically.
Video: A short animation demonstrating the simple installation process of the Target Darts Arc Light system on a dartboard cabinet.
4. Operating Instructions
Using your Arc Light System is straightforward:
- Power On/Off: The Arc Light system is designed to illuminate upon being plugged into a power source. To turn the light off, simply unplug it from the electrical outlet.
- Cabinet Closure: The slim design of the Arc Light ensures that your dartboard cabinet doors can be fully closed when the light is installed, protecting your dartboard when not in use.
Image: The Arc Light system effectively illuminating the entire surface of a dartboard, enhancing visibility.
5. Care and Maintenance
To ensure the longevity and optimal performance of your Arc Light System, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to gently wipe the light and arm. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Storage: If you need to store your dartboard cabinet for an extended period, ensure the Arc Light is unplugged. Protect the light from direct impact or excessive pressure to prevent damage.
6. Troubleshooting Common Issues
If you encounter any issues with your Arc Light System, please refer to the table below for potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply or loose connection. | Check if the power adapter is securely plugged into both the light and a working electrical outlet. Try a different outlet. |
| Light flickers | Unstable power source or intermittent connection. | Ensure the power connection is stable. Try plugging into a different outlet. |
| Cabinet doors do not close properly | Arc Arm not positioned correctly or cabinet design variation. | Verify that the Arc Arm is installed precisely on the top center of the cabinet. While designed to fit most cabinets, some unique cabinet designs may affect closure. Re-adjust if necessary. |
| Light detaches from cabinet | Adhesive not properly applied or surface not clean. | Ensure the cabinet surface was thoroughly cleaned and dry before applying the 3M adhesive. Reapply the adhesive, ensuring firm and sustained pressure during installation. |
7. Technical Specifications
| Specification | Detail |
|---|---|
| Brand | TARGET |
| Model Name | Arc Dartboard Cabinet Light Attachment System |
| Part Number | 119699 |
| Color | Black |
| Product Dimensions (W x H) | 3.43" x 1.97" |
| Item Weight | 533 Grams |
| Included Components | 1 x Arc Light, 1 x Arc Arm, 1 x 3M Adhesive Cabinet Fitting System |
| First Available Date | March 30, 2021 |
8. Warranty and Customer Support
For specific warranty information regarding your Target Darts Arc Light System, please refer to the documentation provided with your purchase or visit the official Target Darts website. For technical support or any inquiries not covered in this manual, please contact Target Darts customer service directly.
Manufacturer: Target Darts