PEMP 10.25" Linux Vertical Screen for BMW X5 X6 (E70 E71 CIC) User Manual

Introduction

This manual provides comprehensive instructions for the PEMP 10.25-inch Linux Vertical Screen, designed for BMW X5 and X6 models (E70 E71) with CIC systems from 2010-2012. This unit integrates wired and wireless CarPlay and Android Auto, offering a high-definition display and enhanced connectivity while retaining original vehicle functions.

Image: Visual comparison showing the upgrade from the original BMW screen to the PEMP 10.25-inch Linux screen, highlighting improved display and features.

Safety Information

Important: Please ensure that the product is installed only when the car's power is completely off to prevent electrical damage or injury.

Package Contents

Verify that all the following components are included in your package:

• ISO Wiring Harness
• USB Cable
• Installation Manual (PDF)
• Audio Cable

Image: All included accessories for the PEMP 10.25-inch Linux screen, showing the wiring harness, USB cable, installation manual, and audio cable.

Setup and Installation

1. Compatibility Check

This unit is specifically designed for BMW E70 E71 X5 X6 models with the CIC original 4PIN LVDS system. Please confirm your vehicle's system type before proceeding with installation.

Image: Diagram illustrating various BMW LVDS connection types (10PIN CCC, 4PIN CIC, 6PIN CIC, 6PIN NBT) and indicating compatibility with 4PIN CIC systems.

2. Wiring Connections

Carefully follow the wiring diagram to connect the new screen. A crucial step involves transferring the 2-pin green optical fiber cable from the original CD unit to the Linux harness. Ensure all connections are secure.

Image: Detailed diagram showing how to correctly transfer the 2-pin green optical fiber cable from the original CD unit to the new Linux harness during installation.

For wired CarPlay and Android Auto functionality, ensure the USB cable is connected to the designated USB IN 1 port.

3. Initial Setup and Resolution Settings

After installation, power on the vehicle. If the display appears glitchy or fuzzy, you may need to adjust the screen resolution. Navigate to Setup > Car Settings > Original Car's Screen Resolution and select the appropriate resolution for your original car (e.g., 800x480).

Image: Screenshot showing the menu path to adjust the original car's screen resolution, with options like 400x240, 640x240, and 800x480.

Operating Instructions

1. Switching Between Interfaces

To switch between the factory OEM interface and the new CarPlay/Android Auto interface, simply long-press the Menu button on your iDrive controller. This allows seamless transition between original car functions and the new system.

Image: A visual guide demonstrating the process of switching between the original BMW interface and the new PEMP system interface.

2. CarPlay and Android Auto

The unit supports both wired and wireless CarPlay and Android Auto. Connect your smartphone via Bluetooth for wireless functionality or use the USB IN 1 port for a wired connection. You can control these features using the touchscreen, your car's iDrive knob, or steering wheel buttons.

Image: Wireless Apple CarPlay interface displayed on the PEMP screen.

Image: Wireless Android Auto interface displayed on the PEMP screen.

3. Mirror Link Functionality

The unit supports Mirror Link, allowing you to display your smartphone's screen directly on the PEMP unit. Connect your phone via Bluetooth to activate this feature.

Image: The Wireless Mirror Link feature in action, showing a smartphone screen mirrored onto the PEMP display.

4. Camera Support

The system supports both OEM and aftermarket front and rear view cameras. Aftermarket cameras must be 720P AHD format or lower. You can select the camera type in the settings: Setup > Car settings > Reversing Settings > Camera type.

Image: Illustration of camera input options, including original and aftermarket camera settings, with examples of parking assist lines and obstacle detection.

Maintenance

To ensure the longevity and optimal performance of your PEMP Linux Vertical Screen, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to clean the screen. Avoid using abrasive cleaners, solvents, or aerosol sprays, as these can damage the display surface.
• Connections: Periodically check all wiring connections to ensure they remain secure and free from corrosion. Loose connections can lead to intermittent functionality.
• Temperature: Avoid exposing the unit to extreme temperatures, both hot and cold, for extended periods.

Troubleshooting

This section addresses common issues you might encounter with your PEMP Linux Vertical Screen.

1. No Sound Issue

If you experience no sound from the unit:

1. Press the FM/AM button on your original car radio to confirm if the OEM radio has sound.
2. If the OEM radio has sound, ensure the correct resolution is set in Setup > Car Settings > Original Car's Screen Resolution.
3. If there is no sound from the OEM radio, you may need to reconnect the audio socket on the back of the OEM radio unit.

2. Display Glitches or Incorrect Resolution

If the screen displays incorrectly or appears distorted, refer to the "Initial Setup and Resolution Settings" section above. Adjusting the screen resolution in the settings is often the solution.

3. Connectivity Issues (CarPlay/Android Auto)

If you experience intermittent disconnections or difficulty connecting to CarPlay or Android Auto:

• Ensure your phone's Bluetooth is enabled and properly paired with the unit.
• Verify that the USB cable is securely connected to USB IN 1 for wired connections.
• Check for any available software updates for the unit, as these often include stability improvements.

Specifications

Warranty

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage details, please refer to the documentation included with your purchase. Retain your proof of purchase for warranty claims.

Support

For technical assistance, installation guidance, or any product-related inquiries, please contact PEMP customer support. Our professional after-sales team aims to respond to your messages within 24 hours.

When contacting support, it is highly recommended to provide a photo of your car's dashboard and specify the model year to help us provide the most accurate and efficient assistance.

For additional resources, you may visit the PEMP Store on Amazon.