Mistral MFH08Y21

Download PDF
Contents

Mistral 2000W Low Profile Fan Heater

Model: MFH08Y21 - User Manual

Product Overview

The Mistral 2000W Low Profile Fan Heater (Model MFH08Y21) is designed to provide efficient heating for indoor spaces. It features two heat settings, a fan-only mode, an adjustable thermostat, and essential safety features including a safety tip-over switch and overheat protection.

Mistral 2000W Low Profile Fan Heater, white, with two control knobs on top and a front grille.

Figure 1: Mistral 2000W Low Profile Fan Heater. This image shows the compact, white fan heater from an elevated angle, highlighting its front grille and the two grey control knobs on its top surface.

Important Safety Instructions

Please read and understand all safety instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Do not use this heater in bathrooms, laundry areas, or similar indoor locations where water may be present.
  • Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
  • This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
  • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and keep them away from the sides and rear.
  • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
  • Always unplug heater when not in use.
  • Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
  • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
  • This heater has a safety tip-over switch that automatically turns off the unit if it is accidentally tipped over.
  • This heater has overheat protection. If the heater overheats, it will automatically shut off. Unplug the heater and allow it to cool down for 30 minutes before restarting.

Product Features and Controls

The Mistral MFH08Y21 fan heater is equipped with the following features:

  • 2 Heat Settings: Offers 1000W (low heat) and 2000W (high heat) options for varying heating needs.
  • Fan Only Mode: Allows the unit to operate as a fan without heat, suitable for air circulation.
  • Adjustable Thermostat: Enables setting a desired room temperature. The heater will cycle on and off to maintain this temperature.
  • Safety Tip Over Switch: Automatically shuts off the heater if it is accidentally knocked over, enhancing safety.
  • Overheat Protection: Automatically turns off the heater if it reaches an unsafe temperature, preventing damage and fire hazards.

Control Knobs:

Close-up of the control knobs on the Mistral fan heater. There are two grey rotary knobs, one for mode selection and one for thermostat control.

Figure 2: Control Knobs. This image provides a closer view of the two grey rotary control knobs located on the top surface of the heater. The left knob typically controls the mode (off, fan, low heat, high heat), and the right knob controls the thermostat.

  • Left Knob (Mode Selector): Used to turn the heater ON/OFF and select the operating mode:
    • O: Off
    • Fan Symbol: Fan Only Mode
    • I: Low Heat (1000W)
    • II: High Heat (2000W)
  • Right Knob (Thermostat Control): Used to adjust the desired room temperature. Turn clockwise for higher temperature settings.

Setup

  1. Unpacking: Carefully remove the heater from its packaging. Retain packaging for future storage.
  2. Placement: Place the heater on a firm, level surface. Ensure it is at least 1 meter (3 feet) away from walls, furniture, and other combustible materials. Do not place it on soft surfaces like carpets or rugs that might block the air intake.
  3. Power Connection: Ensure the heater is switched to the "O" (Off) position. Plug the power cord directly into a standard 230-240V AC wall outlet. Do not use extension cords or power strips.

Operating Instructions

  1. Turning On: With the heater plugged in, turn the left (mode selector) knob from "O" to your desired setting:
    • For fan only, select the Fan Symbol.
    • For low heat (1000W), select I.
    • For high heat (2000W), select II.
  2. Adjusting Thermostat: Once a heat setting is selected, turn the right (thermostat control) knob clockwise to increase the desired temperature. The heater will operate until the room reaches the set temperature, then cycle off. It will turn back on when the temperature drops. For continuous heating, turn the thermostat knob to its maximum setting.
  3. Turning Off: To turn off the heater, rotate the left (mode selector) knob back to the "O" position. Unplug the heater from the wall outlet when not in use for extended periods.

Maintenance

Regular maintenance ensures optimal performance and longevity of your heater.

  • Cleaning:
    • Always unplug the heater and allow it to cool completely before cleaning.
    • Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
    • Use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles.
    • Never immerse the heater in water or any other liquid.
  • Storage:
    • When not in use, store the heater in its original packaging in a cool, dry place.
    • Avoid placing heavy objects on top of the heater during storage.

Troubleshooting

If your heater is not operating correctly, please check the following common issues before contacting support.

ProblemPossible CauseSolution
Heater does not turn on.
  • Not plugged in securely.
  • Power outlet not working.
  • Mode selector knob is on "O" (Off).
  • Safety tip-over switch activated.
  • Overheat protection activated.
  • Ensure the power cord is firmly plugged into a working wall outlet.
  • Check the circuit breaker.
  • Turn the mode selector knob to a heat or fan setting.
  • Ensure the heater is on a firm, level surface.
  • Unplug the heater, allow it to cool for 30 minutes, then plug it back in.
Heater produces no heat in heat mode.
  • Thermostat set too low.
  • Overheat protection activated.
  • Increase the thermostat setting.
  • Unplug the heater, allow it to cool for 30 minutes, then plug it back in.
Heater cycles on and off frequently.
  • Thermostat is set close to the current room temperature.
  • Air intake/exhaust blocked.
  • Adjust the thermostat to a higher setting if more heat is desired.
  • Ensure grilles are clear of obstructions and clean them if necessary.

Specifications

BrandMistral
ModelMFH08Y21
Power Output1000W / 2000W
Number of Speeds2 (Heat settings) + Fan Only
Special FeaturesOverheat Protection, Safety Tip Over Switch, Adjustable Thermostat
Item Weight1.17 kg
Package Dimensions27.6 x 25.1 x 11.9 cm
Power SourceElectric
Indoor/Outdoor UsageIndoor

Warranty and Support

This Mistral product comes with a standard manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your purchase or visit the official Mistral website.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Mistral customer service. Contact details can typically be found on the product packaging, the official brand website, or your purchase receipt.

© 2024 Mistral. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.