1. Introduction
Thank you for choosing the Yaheetech Adjustable Height Coffee Table, Model 614136. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
2. Safety Information
To ensure safe use and prevent damage, please observe the following safety guidelines:
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight recommendations for the tabletop and storage compartments.
- Keep small parts and packaging materials away from children and pets to avoid choking hazards.
- Use caution when operating the lift-top mechanism to avoid pinching fingers or hands.
- Do not stand or sit on the table.
- If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
3. Package Contents
Before assembly, please verify that all components listed below are present and undamaged. If any parts are missing or defective, please contact customer service.
- Tabletop Panel
- Side Panels (2)
- Bottom Shelf Panel
- Internal Storage Panels
- Lift-Top Mechanism (Gas Springs and Hinges)
- Hardware Pack (Screws, dowels, cam locks, etc.)
- Assembly Tool (e.g., Allen wrench)
- Instruction Manual
4. Assembly Instructions
Assembly typically requires two people and approximately 1-2 hours. Follow the steps below carefully.
- Prepare the Area: Clear a spacious, clean, and soft area for assembly to prevent damage to the table components and your floor. Unpack all parts and hardware, comparing them against the package contents list.
- Assemble the Base Frame: Attach the side panels to the main base structure using the provided screws and dowels. Ensure all connections are snug but do not overtighten.
- Install the Bottom Shelf: Secure the bottom shelf panel between the assembled side panels.
- Construct the Internal Storage Box: Assemble the internal panels to form the storage compartment. This box will sit within the main frame.
- Attach the Lift-Top Mechanism: Carefully attach the gas spring lift mechanism to the internal storage box and the tabletop panel. Pay close attention to the orientation of the hinges and gas springs as shown in the detailed diagrams. Ensure all screws are firmly secured.
- Secure the Tabletop: Once the lift mechanism is attached to both the storage box and the tabletop, carefully align and secure the tabletop to the main frame via the lift mechanism.
- Final Checks: Once assembled, gently test the lift-top mechanism to ensure smooth operation. Verify all screws are tightened. Place the foam pads (if included) on the corners of the internal frame to prevent collision damage when the top is lowered.
5. Operating Instructions
This coffee table features an adjustable lift-top and integrated storage for enhanced functionality.
5.1 Using the Lift-Top Mechanism
- To raise the tabletop, gently lift the front edge of the table. The gas springs will assist in smoothly raising the top to its elevated position.
- To lower the tabletop, gently push down on the front edge. The gas springs will provide a controlled descent, preventing sudden drops.
- The raised tabletop provides a comfortable height for working on a laptop, eating, or other activities while seated on a sofa.
5.2 Accessing the Storage Compartment
- When the tabletop is raised, the spacious compartment beneath becomes accessible. This area is ideal for storing remote controls, magazines, books, or other small items.
- The open bottom shelf provides additional storage or display space.
6. Maintenance
Proper care will extend the life and appearance of your coffee table.
- Cleaning: Wipe the table surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Promptly clean up any spills to prevent staining, especially on the wood surface. The table features a water-resistant surface for easier cleaning.
- Protection: Use coasters under drinks and placemats under hot items to protect the tabletop from heat and moisture rings.
- Hardware: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
- Placement: Avoid placing the table in direct sunlight or near heat sources, which can cause fading or warping.
7. Troubleshooting
If you encounter any issues with your coffee table, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Tabletop is wobbly or unstable. | Loose screws or uneven assembly. | Check and tighten all screws and fasteners. Ensure the table is on a level surface. |
| Lift-top mechanism is stiff or difficult to operate. | Mechanism not properly aligned or lubricated; excessive weight on top. | Ensure the mechanism is free of obstructions. Check alignment during assembly. Do not place excessive weight on the tabletop. A small amount of silicone lubricant can be applied to moving parts if needed. |
| Tabletop does not close flush. | Obstruction in the storage compartment; mechanism misalignment. | Remove any items from the storage compartment that might be blocking the tabletop. Recheck the assembly of the lift mechanism for proper alignment. |
| Scratches or damage during assembly. | Assembly on a hard or rough surface. | Always assemble on a soft, protective surface. For minor scratches, touch-up pens or furniture markers matching the grey finish may be used. |
8. Specifications
Detailed specifications for the Yaheetech Adjustable Height Coffee Table, Model 614136:
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model Number | 614136 |
| Color | Grey |
| Product Dimensions (L x W x H) | 98 x 50 x (42-56) cm (38.6 x 19.7 x (16.5-22) inches) |
| Material | Engineered Wood (P2 MDF), Metal |
| Item Weight | 19.03 Kilograms (41.95 lbs) |
| Maximum Weight Recommendation | 35 Kilograms (77 lbs) |
| Features | Space-saving, Storage, Adjustable Height Lift-Top |
| Care Instructions | Wipe with a damp cloth |
| Recommended Uses | Living room table, temporary work/dining table, storage space |
| Shape | Rectangular |
9. Warranty and Support
Yaheetech is committed to providing quality products. For any questions regarding assembly, missing parts, or product defects, please contact our customer support team. While specific spare parts availability information is not provided, our support team will assist you with any issues you may encounter.
Please have your model number (614136) and purchase information ready when contacting support.
