Product Overview
The TECHTONGDA High Pressure Electric Air Compressor Pump is designed for various high-pressure air applications, including fire fighting and diving. This robust unit operates on 110V power and delivers a work flow of 50L/min, capable of reaching pressures up to 30MPA. Constructed from durable aluminum, it is built for reliable performance.
Figure 1: Angled front view of the TECHTONGDA High Pressure Electric Air Compressor Pump, showcasing its compact design and robust construction.
Key Specifications:
- Voltage: 110V
- Power: 1.80KW
- Work flow: 50L/min
- Material: Aluminum
- Noise: MAX 78DB
- Product size: 19.29 x 11.81 x 19.69 inches (49 x 30 x 50 CM)
Safety Information
Please read and understand all safety warnings before operating the compressor. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
- Do Not Modify: Do not modify the product arbitrarily. Disassembling or repairing the unit by non-technical personnel is strictly prohibited and will void the warranty.
- Electrical Safety: Ensure the electrical socket used can withstand a current greater than 10A. Using an inadequate socket may lead to circuit burnout, product damage, and potential hazards due to overload.
- High Temperature Warning: Do not touch the compressor head section immediately after use. The components can reach high temperatures and cause burns. Allow sufficient time for the unit to cool down.
- Supervision Required: Do not leave the compressor unattended during operation. Unsupervised operation can lead to product damage from increasingly rising pressure, sustained motor overload, or even halting if the operating pressure is reached but the unit is not turned off timely.
Setup
- Unpacking: Carefully remove the compressor from its packaging. Inspect for any visible damage during transit.
- Placement: Place the compressor on a stable, level, and dry surface. Ensure adequate ventilation around the unit to prevent overheating. Do not operate in enclosed spaces.
- Oil Level Check: Before first use, and regularly thereafter, check the machine oil level. Ensure the oil level is above the upper edge of the red point on the sight glass. Refer to the Maintenance section for details on oil type and changing.
- Electrical Connection: Connect the power cord to a grounded 110V outlet that meets the current requirements (greater than 10A).
- Hose Connection: Connect the high-pressure hose to the appropriate outlet on the compressor and to your device (e.g., air rifle, diving tank). Ensure all connections are secure and leak-free.
Figure 2: Close-up view of the compressor's sturdy base and anti-vibration rubber feet, essential for stable placement during operation.
Operating Instructions
- Preparation: Ensure all connections are secure and the oil level is correct. Verify the pressure setting if your model includes this feature.
- Power On: Flip the power switch to the "ON" position. The compressor will begin to operate.
- Monitoring Pressure: Continuously monitor the pressure gauge. Do not exceed the maximum rated pressure of your connected device or the compressor itself (30MPA).
- Automatic Shut-off (if applicable): If your model has a set pressure feature, the unit may automatically shut off once the desired pressure is reached. If not, manually turn off the unit.
- Manual Shut-off: Once the desired pressure is achieved, or if any abnormal operation is observed, immediately flip the power switch to the "OFF" position.
- Bleeding Air: After turning off, slowly open the bleed valve to release any remaining pressure in the hose and compressor system before disconnecting.
- Cool Down: Allow the compressor to cool down completely before moving or storing it.
Figure 3: Top-down view of the compressor, highlighting the integrated carrying handle and accessible power switch for ease of operation and transport.
Maintenance
Regular maintenance is crucial for the longevity and safe operation of your TECHTONGDA air compressor.
- Oil Level Check: The machine oil level should be checked regularly, ideally before each use. Ensure the oil level is always above the upper edge of the red point on the oil sight glass.
- Oil Change: If the color of the machine oil becomes dark and black, it indicates contamination and should be changed immediately. Consult a qualified technician or the manufacturer for recommended oil type and changing procedure.
- Cleaning: Keep the compressor clean and free from dust and debris. Periodically wipe down the exterior with a damp cloth. Ensure the cooling fan (located at the rear) is clear of obstructions.
- Air Filter: Check and clean or replace the air filter as needed to ensure optimal performance and prevent contaminants from entering the compressor.
Figure 4: Rear view of the compressor, illustrating the prominent cooling fan which is vital for dissipating heat and maintaining operational efficiency.
Troubleshooting
This section provides solutions to common issues you might encounter with your compressor. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor does not start | No power supply; Power switch off; Thermal overload activated | Check power cord and outlet; Ensure switch is ON; Allow unit to cool down and reset. |
| Low pressure output | Air leaks in connections; Clogged air filter; Low oil level | Check and tighten all hose connections; Clean/replace air filter; Top up or change oil. |
| Excessive noise or vibration | Loose components; Unit not on level surface; Worn parts | Check and tighten all visible fasteners; Ensure unit is on a stable, level surface; Contact support for worn parts. |
| Overheating | Insufficient ventilation; Prolonged operation; Low oil level | Ensure clear airflow around unit; Allow cool-down periods; Check and maintain oil level. |
Specifications
| Attribute | Value |
|---|---|
| Brand | TECHTONGDA |
| Model Number | L022449 |
| Voltage | 110 Volts |
| Power Source | Electric |
| Maximum Power | 1.8 Kilowatts |
| Work Flow | 50 L/min |
| Noise Level | 78 dB (MAX) |
| Material | Aluminum |
| Product Size | 19.29 x 11.81 x 19.69 inches (49 x 30 x 50 CM) |
| Package Weight | 47 Pounds |
| UPC | 794590768005 |
| ASIN | B08ZN3C7WD |
| Date First Available | March 22, 2021 |
Warranty Information
TECHTONGDA products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact TECHTONGDA customer support. Please note that unauthorized modification, disassembly, or repair by non-technical personnel will void the product warranty.
Protection plans are also available for purchase separately to extend coverage beyond the standard manufacturer's warranty. For details, please visit the product page on Amazon or contact your retailer.
Customer Support
If you have any questions, require technical assistance, or need to report an issue with your TECHTONGDA High Pressure Electric Air Compressor Pump, please contact our customer support team.
For the most up-to-date contact information, please visit the official TECHTONGDA website or refer to the contact details provided with your purchase documentation.
When contacting support, please have your product model number (L022449) and ASIN (B08ZN3C7WD) ready to expedite assistance.
Product Videos
No official product videos from the seller are available for embedding at this time.