1. Safety Information
Please read all instructions carefully before using the Audoc Professional Cordless Hair Clippers. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Water Exposure: Do not use this appliance near bathtubs, showers, basins, or other vessels containing water. If the appliance falls into water, do not reach for it. Unplug immediately.
- Children: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Blades: The blades are sharp. Handle with care. Do not touch the blades with your fingers when the appliance is operating. Ensure blades are properly aligned before use.
- Damage: Do not operate the appliance with a damaged cord or plug, or if it malfunctions, or has been dropped or damaged in any manner. Contact customer support for assistance.
- Charging: Use only the charger supplied with the appliance. Do not charge the appliance in direct sunlight or near heat sources.
- Cleaning: Always unplug the appliance before cleaning. Use only the recommended cleaning methods and solutions.
- Storage: Store the appliance in a dry place, away from moisture and extreme temperatures.
2. Product Overview
The Audoc Professional Cordless Hair Clippers and Trimmer Kit is designed for versatile hair cutting and detailing. It features durable stainless steel blades, a powerful motor, and a range of guide combs for various lengths.
2.1. Package Contents
Upon unpacking, ensure all items listed below are present and in good condition:
- Professional Hair Clipper (Main Unit)
- Detail Hair Trimmer
- Charging Base for Clipper
- USB Charging Cables (2)
- Cleaning Brush
- Blade Oil
- 10 Colorful Guide Combs for Clipper (1/16" to 1")
- 3 Guide Combs for Trimmer (1mm, 2mm, 3mm)
- Storage Case
- Instruction Manual
3. Setup
3.1. Initial Charging
Before first use, fully charge both the hair clipper and the detail trimmer. Connect the USB charging cable to the charging base for the clipper, and directly to the trimmer. Plug the USB adapter into a suitable power source. The LED display on the clipper will indicate charging status and battery level.
- A full charge typically takes approximately 3 hours.
- The clipper offers up to 180 minutes of cordless operation on a full charge.
3.2. Attaching Guide Combs
Guide combs are essential for achieving desired hair lengths. Ensure the appliance is turned off before attaching or detaching combs.
- Select the desired guide comb based on the cutting length.
- Align the comb with the blade of the clipper or trimmer.
- Slide the comb firmly onto the blade until it clicks into place. Ensure it is securely attached.
- To remove, gently push the comb upwards and away from the blade.
4. Operating Instructions
4.1. General Hair Cutting with the Clipper
The main clipper is ideal for overall hair cutting and fading.
- Adjusting Taper Lever: The clipper features an adjustable taper lever on the side. This lever allows for fine-tuning cutting lengths from 1mm to 3mm without needing a guide comb, perfect for blending and fading.
- Using Guide Combs: For longer lengths, attach one of the 10 colorful guide combs. Each comb corresponds to a specific length, from 1/16 inch (1.5mm) to 1 inch (25mm).
- Technique: Always cut against the direction of hair growth. Use smooth, overlapping strokes. For best results, ensure hair is clean and dry.
4.2. Using the Detail Trimmer
The detail trimmer is designed for precision work, outlining, and dry shaving.
- Close Cutting: The trimmer features close-cutting, carbon-steel T-blades that are zero-gapped for precise lines and designs.
- Guide Combs: Use the 1mm, 2mm, or 3mm guide combs for the trimmer to achieve short, even lengths for beards or detailed areas.
- S-shaped Obtuse Angle: The blade design is skin-friendly, reducing the risk of scratches.
4.3. Powerful Motor Performance
Both the clipper and trimmer are equipped with powerful motors for efficient cutting.
- The main clipper's rotation speed is 6000 RPM, suitable for professional barber use and home cutting.
- The motor operates quietly, typically under 60db, for a more comfortable experience.
5. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Audoc hair clippers and trimmer.
5.1. Cleaning the Blades
- Turn off the appliance and disconnect it from the power source.
- Carefully remove any attached guide comb.
- Use the provided cleaning brush to remove loose hairs from the blades and the cutting head area.
- For a more thorough cleaning, the blades can be detached (refer to specific instructions if provided in the physical manual for your model). Rinse detached blades under running water and allow them to air dry completely before reattaching. Do not immerse the main body of the clipper or trimmer in water.
5.2. Oiling the Blades
After every few uses, or after cleaning with water, it is important to oil the blades to maintain their sharpness and smooth operation.
- Apply 1-2 drops of the supplied blade oil across the top of the blades.
- Turn on the clipper/trimmer for a few seconds to allow the oil to distribute evenly.
- Wipe off any excess oil with a soft cloth.
5.3. Storage
When not in use, store the clippers and all accessories in the provided storage case in a cool, dry place, away from direct sunlight and moisture.
6. Troubleshooting
If you encounter any issues with your Audoc Professional Cordless Hair Clippers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper/Trimmer does not turn on. | Battery is depleted. | Charge the appliance fully. |
| Poor cutting performance or pulling hair. | Blades are dull or dirty. Hair buildup. Lack of oil. | Clean and oil the blades. Ensure blades are free of hair. If blades are dull, consider replacement (contact support). |
| Appliance gets hot during use. | Extended continuous use. Blades need oiling. | Allow the appliance to cool down. Clean and oil the blades. Ensure proper ventilation. |
| Guide comb does not stay attached. | Comb not properly aligned or damaged. | Ensure the comb is clicked firmly into place. Inspect the comb for damage; replace if necessary. |
If the problem persists after attempting these solutions, please contact Audoc customer support.
7. Specifications
- Model Number: AUDOC-CLIPPER-2PCS
- Brand: Audoc
- Power Source: Battery Powered
- Motor Speed (Clipper): 6000 RPM
- Clipper Adjustable Lengths: 1mm to 3mm (without guard combs)
- Trimmer Adjustable Lengths: 0.0mm to 0.5mm (without guard combs)
- Clipper Guide Combs: 10 (1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1")
- Trimmer Guide Combs: 3 (1mm, 2mm, 3mm)
- Blade Material: Titanium + Ceramic Precision blades (Trimmer: Carbon-steel T-blade)
- Color: Black Or Silver
- Item Weight: 1.06 Kilograms (2.34 Pounds)
- Package Dimensions: 9.13 x 6.61 x 3.11 inches
8. Warranty and Support
Audoc is committed to providing high-quality products. While specific warranty details may vary, if you encounter any problems with your Audoc Professional Cordless Hair Clippers, please contact our customer support team.
Our team is dedicated to offering solutions and assistance for any product-related inquiries or issues you may experience.
For support, please refer to the contact information provided with your product packaging or visit the official Audoc website.