Introduction
Thank you for choosing the LEPOTEC 54-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting solution. Please read this manual thoroughly before use and retain it for future reference.
Package Contents
- 2 x LEPOTEC 54-LED Motion Sensor Cabinet Lights
- 2 x Iron Sheets (for magnetic mounting)
- 1 x USB Charging Cable
- 2 x Adhesive Tapes
- 1 x User Manual
Product Overview
The LEPOTEC 54-LED Motion Sensor Cabinet Light features 54 lamp beads for bright, soft, and non-glare illumination. Constructed from aluminum alloy, it boasts a slim profile and versatile functionality.
Installation
The light features a built-in magnet for easy attachment and removal. Follow these steps for installation:
- Magnetic Attachment: The light has a built-in magnet. It can be directly absorbed onto any ironwork surface.
- Adhesive Mounting: For non-iron surfaces, use the included adhesive tape to attach the iron sheet to your desired location. Once the iron sheet is secured, the light can be magnetically attached to it.
- Removal: When charging or relocating, simply detach the light from the magnetic strip or ironwork.
Operating Modes
The light features a 3-mode switch (On-Off-G) to adjust its operation:
- ON Mode: The light remains continuously on.
- OFF Mode: The light is turned off.
- G (Motion Sensor) Mode: In dark environments, the light automatically senses human motion within a 10ft/120° range and turns off after 20 seconds of no movement.
Motion Sensor Conditions
Under G (Motion Sensor) Mode, the sensor is only activated in low-light conditions. It will not turn on if sufficient ambient light is detected.
Charging
The light features a built-in 2500mAh high-capacity rechargeable battery. It is easily charged via the included USB cable.
- Charging Time: Approximately 3 hours for a full charge.
- Battery Life: About 3 hours in ON mode, and 2-4 weeks in G (Motion Sensor) mode (activating 10 times a day).
- Charging Indicator: A red light indicates charging, and a green light indicates a full charge.
Usage Scenarios
This versatile light can be used in various indoor locations to provide convenient illumination:
Troubleshooting
- Light not turning on in G Mode: Ensure the environment is dark enough. The sensor will not activate if sufficient ambient light is detected.
- Interference between lights: Do not place two motion-activated LED night lights too close to each other, as they can interact and cause one or both products to malfunction.
Specifications
| Feature | Detail |
|---|---|
| Brand | LEPOTEC |
| Model Number | L54-2-warm |
| Color | Silver-warm White Light |
| Material | Aluminum |
| Product Dimensions | 12.5"L x 1.6"W x 0.4"H |
| Power Source | Battery Powered (USB Rechargeable) |
| Battery Type | Lithium Polymer (2500mAh) |
| Light Source Type | LED (54 lamp beads) |
| Brightness | 300 Lumens |
| Color Temperature | 3500 Kelvin (Warm White Light) |
| Special Feature | Motion Sensor |
| Installation Type | Surface Mount (Magnetic/Adhesive) |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 13.3 ounces |
Customer Support
For any questions, concerns, or technical assistance, please refer to the contact information provided with your purchase or visit the official LEPOTEC website.