Important Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal.
- WARNING: To avoid electric shock, disconnect power at the circuit breaker or fuse box before installation.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring.
- This fixture is designed for 120V, 60Hz power supply.
- Ensure the mounting surface is structurally sound and can support the weight of the fixture.
- Do not exceed the maximum wattage of 60 watts per bulb. Use E26/Medium (Standard) bulbs.
- This fixture is damp-rated, suitable for high-moisture indoor spaces like bathrooms, and covered outdoor areas such as porches and patios. It is not to be exposed directly to rain.
Image: The Fairendale 4-Light Bath Vanity in Matte Black, highlighting its damp-rated status for indoor/outdoor use (under covered areas) and indicating that bulbs are not included.
What's Included
Carefully unpack the fixture and check that all parts are present. Refer to the diagram below for component identification.
- Vanity Light Fixture (1)
- Clear Glass Shades (4)
- Mounting Hardware Kit (includes mounting plate, screws, wire nuts)
- Instruction Manual (this document)
Image: Detailed view of the product components, illustrating the wall mount type, matte black finish, and clear glass shades.
Tools Required (Not Included)
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Wire Strippers
- Electrical Tape
- Pliers
- Safety Glasses
- Step Ladder
Installation Instructions
Step 1: Prepare for Installation
- Turn off the power at the main circuit breaker or fuse box.
- Remove the old fixture, if applicable.
- Unpack your new fixture and lay out all components on a clean surface.
Step 2: Mount the Fixture
- Attach the mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
- Connect the fixture's ground wire to the ground wire from the junction box (usually bare copper or green). Secure with a wire nut.
- Connect the fixture's white wire to the white (neutral) wire from the junction box. Secure with a wire nut.
- Connect the fixture's black wire to the black (hot) wire from the junction box. Secure with a wire nut.
- Carefully tuck all wires into the junction box.
- Align the fixture's base with the mounting plate and secure it with the decorative nuts or screws provided.
Image: Close-up details of the fixture's construction, including the matte black metalwork and clear glass shades, providing visual reference for assembly.
Step 3: Install Glass Shades and Bulbs
- Carefully attach each clear glass shade to the fixture. Ensure they are securely fastened but do not overtighten.
- Insert E26/Medium (Standard) bulbs (not included) into each socket. Do not exceed 60 watts per bulb.
Image: Illustration of the bulb base (E26 socket) and bulb, specifying a maximum wattage of 60 watts.
Reversible Mounting Option
This fixture can be mounted with the glass shades facing either upwards or downwards, depending on your preference. Ensure the mounting hardware is correctly oriented for your desired position during installation.
Image: Visual representation of the light fixture mounted in both an upward and downward position, illustrating its reversible mounting capability.
Operating Instructions
Once installation is complete and all connections are secure, restore power at the circuit breaker. The light fixture can be operated using a standard wall switch.
Dimmer Compatibility
This fixture is compatible with a dimmer switch (not included). If you wish to use a dimmer, ensure it is rated for LED bulbs if you are using LED bulbs, and follow the dimmer switch manufacturer's installation instructions.
Maintenance
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before handling. Replace with E26/Medium (Standard) bulbs, not exceeding 60 watts.
- Inspection: Periodically check all connections and mounting hardware for tightness.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Flickering light. |
|
|
| Glass shades are loose. |
|
|
Specifications
| Model Name: | Fairendale |
| Model Number: | 51535-01 |
| Brand: | Prominence Home |
| Dimensions (L x W x H): | 30.3" x 7.44" x 8.56" |
| Material: | Glass, Metal |
| Finish: | Matte Black |
| Number of Lights: | 4 |
| Bulb Base: | E26/Medium (Standard) |
| Max Wattage per Bulb: | 60 Watts |
| Voltage: | 120 Volts |
| Power Source: | Hardwired |
| Installation Type: | Wall Mount, Semi Flush Mount |
| Dimmable: | Yes (with compatible dimmer switch, not included) |
| Indoor/Outdoor Usage: | Indoor (Damp-rated), Covered Outdoor (Damp-rated) |
| Certification: | ETL Listed |
Image: Diagram illustrating the overall dimensions of the 4-light vanity fixture, including its length (30.3"), height (8.5"), and depth (7.44" from other spec).
Image: A chart comparing different bulb types (Standard Incandescent, Halogen, CFL, LED) based on brightness (lumens), equivalent wattage, rated life, and energy savings.
Warranty Information
This Prominence Home Fairendale Vanity Light comes with a Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific details regarding coverage and claims, please refer to the warranty documentation included with your purchase or contact customer support.
Customer Support
For assistance with installation, troubleshooting, or warranty claims, please contact Prominence Home customer support.
- Website: Visit the Prominence Home Store on Amazon
- Refer to the contact information provided in your product packaging for direct support.