Sun Joe SPX-FC34-PRO Foam Cannon Instruction Manual

Introduction

The Sun Joe SPX-FC34-PRO Foam Cannon is designed to enhance your pressure washing experience by creating a thick, viscous layer of soapy suds. This attachment is ideal for cleaning vehicles, windows, patio furniture, and other outdoor surfaces, effectively breaking down caked-on dirt, grease, and grime. Its adjustable features allow for precise control over foam consistency and spray pattern, ensuring optimal cleaning results.

Figure 1: Sun Joe SPX-FC34-PRO Foam Cannon

Safety Information

Always read and understand all safety warnings and instructions before using the foam cannon. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always wear appropriate personal protective equipment, including eye protection, when operating the pressure washer and foam cannon.
• Ensure the pressure washer is turned off and disconnected from the power source before attaching or detaching the foam cannon.
• Do not direct the spray at people, pets, or electrical devices.
• Use only detergents specifically designed for pressure washers and foam cannons.
• Keep children and bystanders away from the work area.

Setup

1. Prepare Detergent Solution: Fill the 34 fl oz heavy-duty plastic bottle with your preferred pressure washer detergent. The bottle features fluid ounce and milliliter markings for accurate mixing.


Figure 2: Precise Measurement Markings

2. Attach Foam Cannon: Connect the foam cannon to your pressure washer's spray wand using the 1/4" quick connect inlet. Ensure it is securely fastened. The foam cannon is compatible with most pressure washers up to 3000 PSI.


Figure 3: Foam Cannon Assembly

Operating Instructions

1. Adjust Detergent Dial: Use the detergent dial at the top of the foam cannon to control the soap-to-water ratio. Turning the dial allows you to adjust the thickness of the foam produced.


Figure 4: Tailor Your Spray with Adjustable Dial

2. Adjust Spray Nozzle: The spray nozzle adjusts with a twist, allowing you to change the spray pattern from a pinpoint jet to a wide-angle fan spray.


Figure 5: Nozzle Adjustment for Spray Pattern

3. Apply Foam: Once adjusted, activate your pressure washer and begin applying the foam to the desired surface. The high-powered foamer covers gunk, grease, and grime with a thick lather.


Figure 6: High-Powered Foamer in Action

4. Rinse: After allowing the foam to dwell and break down dirt, rinse the surface thoroughly with clean water using your pressure washer or a hose.

Helpful Tips:

• For heavily soiled surfaces, allow the foam to sit for a few minutes before rinsing.
• Always test the foam cannon and detergent on an inconspicuous area first to ensure compatibility and prevent damage.
• The 34 fl oz capacity minimizes the need for frequent refills during larger cleaning tasks.

Official Product Video:

Maintenance

• Cleaning: After each use, rinse the foam cannon thoroughly with clean water to remove any detergent residue. This prevents clogging and ensures optimal performance.
• Storage: Store the foam cannon in a cool, dry place, away from direct sunlight and freezing temperatures.
• Inspection: Periodically inspect the quick connect fittings and nozzle for any signs of wear or damage. Replace components as needed.

Troubleshooting

Specifications

Warranty and Support

The Sun Joe SPX-FC34-PRO Foam Cannon is backed by the Snow Joe + Sun Joe customer promise. New products are warranted for two years from the date of purchase. NO QUESTIONS ASKED.

For further assistance, please contact Snow Joe + Sun Joe Customer Support at 1-866-766-9563.

You can also visit the official Sun Joe store for more information: Sun Joe Store