Artemide USC-1274018A
Contents
Artemide NH LED | Gold - S2 14 SUSP-5W/E12 User Manual
Model: USC-1274018A
Product Overview
The Artemide NH LED Gold S2 14 SUSP-5W/E12 is a contemporary suspension light fixture designed for indoor use. It features a minimalist design with a spherical LED light source and a distinctive gold accent, providing adjustable illumination for various room types, including study rooms. This fixture operates on 120 Volts and uses a 5-watt E12 LED bulb.
Key Features
- Brand: Artemide
- Color: Gold
- Material: Glass, Metal
- Style: Contemporary
- Light Source Type: LED
- Wattage: 5 watts
- Bulb Base: E12
- Special Feature: Adjustable

This image displays the Artemide NH LED Gold S2 14 SUSP-5W/E12 light fixture. It features a long horizontal black bar with a spherical white LED bulb suspended below it by a gold-colored accent. The fixture is suspended from the ceiling by thin wires and a power cable, showcasing its modern and minimalist design.
Setup and Installation
Safety Precautions
- Always turn off the power at the circuit breaker before beginning installation.
- Consult a qualified electrician if you are unsure about any part of the installation process.
- Wear appropriate safety gear, including gloves and eye protection.
- Ensure the mounting surface can support the weight of the fixture.
Unpacking
- Carefully remove all components from the packaging.
- Inspect all parts for any damage. Do not proceed with installation if any parts are damaged.
- Keep all packaging materials until installation is complete to ensure no small parts are discarded.
Mounting Instructions
- Identify the desired mounting location on the ceiling.
- Secure the mounting bracket to the ceiling junction box using appropriate screws.
- Adjust the suspension cables to the desired length for the fixture's height.
- Attach the fixture's canopy to the mounting bracket, ensuring a secure fit.
Electrical Connection
- Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts.
- Ensure all connections are tight and secure.
- Carefully tuck all wires into the junction box.
- Restore power at the circuit breaker and test the light fixture.
Operation
Turning On/Off
The Artemide NH LED fixture is operated via a standard wall switch connected to the electrical circuit. Simply toggle the switch to turn the light on or off.
Adjusting the Fixture
This fixture features an adjustable design. The position of the spherical light source along the horizontal bar can be adjusted to direct light as needed. Gently slide the light along the bar to achieve the desired illumination angle and coverage.
Maintenance
Cleaning
To maintain the appearance and performance of your Artemide NH LED fixture, clean it regularly. Ensure the power is turned off before cleaning. Use a soft, dry cloth to wipe down the metal and glass surfaces. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying with a clean, dry cloth. Avoid abrasive cleaners or solvents.
Bulb Replacement
The fixture uses an E12 base LED bulb with a maximum wattage of 5W. While LED bulbs have a long lifespan, if replacement is necessary:
- Turn off the power to the fixture at the circuit breaker.
- Allow the bulb to cool if it has been recently in use.
- Carefully unscrew the old bulb from its socket.
- Screw in a new E12 LED bulb (max 5W) until snug. Do not overtighten.
- Restore power and test the new bulb.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture; Loose wiring; Faulty bulb; Tripped circuit breaker. | Check circuit breaker; Verify wire connections; Replace bulb; Ensure wall switch is on. |
| Light flickers | Loose bulb; Incompatible dimmer switch; Loose wiring. | Tighten bulb; Ensure dimmer is LED compatible; Check wire connections. |
| Humming noise | Incompatible dimmer switch; Loose components. | Replace dimmer with an LED-compatible one; Check for loose parts. |
Specifications
| Attribute | Value |
|---|---|
| Brand | Artemide |
| Model Number | USC-1274018A |
| Color | Gold |
| Material | Glass, Metal |
| Style | Contemporary |
| Light Fixture Form | Wall (Note: Product description indicates suspension, but specification lists 'Wall'. Refer to product images for actual form.) |
| Room Type | Study Room |
| Power Source | Corded Electric |
| Special Feature | Adjustable |
| Light Source Type | LED |
| Finish Type | Brushed Brass, Painted, Gold, Glass |
| Shade Material | Glass |
| Voltage | 120 Volts |
| Specification Met | E12 |
| Wattage | 5 watts |
| Bulb Base | E12 |
| Unit Count | 1 Count |
| Mounting Type | Wall Mount (Note: Product description indicates suspension, but specification lists 'Wall Mount'. Refer to product images for actual mounting.) |
| Fixture Type | Non Removable |
| Date First Available | March 18, 2021 |
Warranty and Support
Artemide products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official Artemide website for specific warranty terms and conditions applicable to your region.
For technical support, replacement parts, or further assistance, please contact Artemide customer service through their official website or authorized distributors. When contacting support, please have your model number (USC-1274018A) and purchase date readily available.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.