1. Introduction
The Fayleeko Upgraded LCD Display Power Meter Plug is designed to monitor the electricity consumption of your household appliances. This device provides real-time data on various electrical parameters, helping you understand and manage your energy usage effectively. It features an upgraded bright LCD display for clear readability and includes an overload protection function for safety.
2. Safety Information
- Do not exceed the maximum load capacity of 1650W (15A at 110V) to prevent overload and potential damage.
- Ensure the device is used in a dry environment. Avoid exposure to water or high humidity.
- Do not disassemble or attempt to repair the device. Refer to qualified personnel for service.
- Keep out of reach of children.
- Always ensure the appliance plugged into the meter is in good working condition.
3. Product Overview
The Fayleeko Power Meter Plug is a compact device that plugs directly into a standard wall outlet. It features a large, backlit LCD screen to display various electrical measurements and intuitive buttons for navigation and settings.
Image 3.1: Front view of the Fayleeko Power Meter Plug, showing the LCD display and control buttons.
Components:
- LCD Display: Shows various electrical parameters and settings.
- FUNCTION Button: Cycles through different display modes.
- COST Button: Used to set the electricity price.
- UP/DOWN Buttons: Adjust values during settings.
- RESET Pinhole: Resets all data and settings to factory defaults.
- Power Outlet: For plugging in the appliance to be monitored.
4. Key Features
- Overload Protection: Automatically warns and disconnects power if consumption exceeds 1650W.
- Upgraded Digital LCD Display: Large, clear, and backlit for easy reading in various lighting conditions.
- Comprehensive Electricity Usage Monitoring: Measures power (W), energy (kWh), voltage (V), current (A), frequency (Hz), power factor, maximum power (W), time, and days.
- Data Storage Memory: Retains settings and accumulated data even when unplugged.
- Controllable Backlight: Adjustable backlight duration for energy saving and convenience.
Image 4.1: Visual representation of the multiple functions available on the power meter, including kWh, Current, Voltage, Power, Power Factor, Electric Bill, Cumulative Time, Frequency, Max/Min Power, and Overload.
5. Setup
- Plug In: Insert the Fayleeko Power Meter Plug into a standard 110V-120V AC wall outlet. The LCD display will illuminate.
- Connect Appliance: Plug the appliance you wish to monitor into the power outlet on the front of the meter.
- Initial Check: The meter will immediately begin displaying real-time data.
Image 5.1: Examples of the power meter being used with different household appliances, demonstrating its 'plug and play' functionality.
6. Operating Instructions
6.1. Display Modes
Press the FUNCTION button repeatedly to cycle through the 7 different display modes:
- Mode 1: Time / Watt / Cost (Cumulative electricity consumption time, real-time power, and total cost)
- Mode 2: Time / Cumulative kWh / Days (Cumulative electricity consumption in kWh and total days)
- Mode 3: Time / Voltage / Frequency (Real-time voltage and frequency)
- Mode 4: Time / Current / Power Factor (Real-time current and power factor)
- Mode 5: Time / Minimum Power (Minimum recorded power in Watts)
- Mode 6: Time / Maximum Power (Maximum recorded power in Watts)
- Mode 7: Time / Electricity Price (Current set electricity price per kWh)
Image 6.1: Illustration of the seven distinct display modes, detailing the information presented in each mode, such as Watt, kWh, Voltage, Current, and Cost.
6.2. Setting Electricity Cost
- Press the COST button once. The display will show the current electricity price.
- Press the COST button again. The first digit of the price will start flashing.
- Use the UP and DOWN buttons to adjust the flashing digit.
- Press COST again to move to the next digit. Repeat until all digits are set.
- Press FUNCTION to save the setting and exit.
6.3. Overload Protection
The meter features an overload warning and automatic power cut-off. When the connected appliance's power consumption exceeds the set limit (default 1650W), the LCD will display "OVERLOAD" with an audible alarm, and the power supply to the appliance will be disconnected.
- To set the overload protection value, press and hold the FUNCTION button for 3 seconds.
- Use the UP and DOWN buttons to adjust the overload threshold (e.g., less than 1800W).
- Press FUNCTION to confirm and save the setting.
Image 6.2: The power meter monitoring a heater, illustrating the overload protection feature and the recommendation to set the value below 1800W.
6.4. Resetting Data
To clear all accumulated data (kWh, cost, max/min power, etc.) and reset settings to factory defaults, locate the small RESET pinhole on the front panel. Use a thin, non-metallic object (like a paperclip or the provided plastic tool) to press and hold the button inside the pinhole for approximately 3-5 seconds until the display clears or resets.
6.5. Backlight Control
The meter's backlight duration can be adjusted. This feature helps conserve energy and customize visibility.
- Press and hold the UP button for 3 seconds to enter backlight setting mode.
- Use the UP or DOWN buttons to cycle through backlight options (e.g., 10 minutes, 1 hour, 4 hours, 8 hours, always on).
- Press FUNCTION to confirm your selection.
Image 6.3: Visual guide for adjusting the controllable backlight time, showing options from 10 minutes to 'stay lit'.
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the meter in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Inspection: Periodically check the plug and outlet for any signs of damage or wear.
8. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Display is blank | No power to the outlet; device malfunction. | Check if the wall outlet is functional. Ensure the meter is properly plugged in. If issue persists, contact support. |
| "OVERLOAD" warning | Connected appliance exceeds the set power limit. | Unplug the appliance immediately. Reduce the load or use an appliance with lower power consumption. Reset the meter if necessary. |
| Incorrect readings | Improper connection; device malfunction. | Ensure the appliance is securely plugged into the meter. Try resetting the meter. If readings remain inaccurate, contact support. |
| Buttons unresponsive | Temporary software glitch. | Unplug the meter from the wall outlet for a few seconds, then plug it back in. If unresponsive, perform a pinhole reset. |
9. Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fayleeko |
| Model Number (ASIN) | B08ZD7YL54 |
| Item Weight | 7.8 ounces |
| Package Dimensions | 6.54 x 3.23 x 2.99 inches |
| Color | White |
| Max Load | 1650W / 15A (at 110V-120V) |
| Display | Backlit LCD |
| Data Retention | Yes (Memory function) |
10. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Fayleeko customer service through your purchase platform. Keep your purchase receipt for warranty claims.