MINELAB 3300-0500

Download PDF
Contents

Minelab GPX 6000 Gold Detector User Manual

Model: 3300-0500

1. Product Overview

The Minelab GPX 6000 is an advanced all-gold detector designed for adults, featuring 11-inch Monoloop and 14-inch Double-D waterproof coils, and includes wireless headphones. This detector is engineered for efficient gold detection across various ground conditions.

Minelab GPX 6000 Gold Detector with 11-inch and 14-inch coils

Figure 1: The Minelab GPX 6000 Gold Detector, showcasing its main components including the control unit, shaft, and search coils.

Key features include GeoSense-PI technology for precise gold signal analysis, the ability to locate gold fragments to large nuggets, and a robust design tested for extreme environments. Its lightweight carbon fiber shafts and user-friendly interface ensure comfortable and efficient operation.

2. Setup and Assembly

Before first use, assemble the detector components and ensure the battery is charged.

2.1 Component Identification

Diagram of Minelab GPX 6000 components: Monoloop coil, carbon fiber shaft, backlit control pod, lightweight control box, built-in speaker.

Figure 2: Exploded view of the GPX 6000, highlighting the GPX11 Monoloop coil, carbon fiber shaft, backlit control pod, lightweight control box, and built-in speaker.

2.2 Assembly Steps

  1. Attach the Search Coil: Securely connect your chosen search coil (11" Monoloop or 14" Double-D) to the lower shaft using the provided hardware. Ensure the cable is wrapped snugly around the shaft.
  2. Connect Shaft Sections: Assemble the carbon fiber shaft sections, ensuring they click into place. The detector's length is adjustable from 26.5 inches (67 cm) to 61 inches (155 cm).
  3. Mount Control Box: Attach the control box to the upper shaft. Connect the coil cable to the control box.
  4. Charge Battery: The detector uses 1 Lithium Ion battery (included). Fully charge the battery before first use. The battery life is approximately 8 hours.
  5. Connect Wireless Headphones: The included wireless headphones provide low-latency audio. Pair them with the detector according to the instructions in the headphone manual.
Minelab GPX 6000 with 11-inch Monoloop coil, 14-inch Double-D coil, and low latency headphones.

Figure 3: The two included search coils (11" Monoloop and 14" Double-D) and the low-latency wireless headphones.

3. Operating Instructions

The GPX 6000 is designed for ease of use with automatic features.

3.1 Powering On and Basic Controls

Close-up of Minelab GPX 6000 control panel showing Bluetooth control, power on/off, volume adjust, noise cancel, and ground type buttons.

Figure 4: The control panel of the GPX 6000, illustrating the various buttons and display indicators for operation.

  • Power On/Off: Press and hold the power button on the control pod to turn the detector on or off.
  • Volume Adjust: Use the volume buttons to increase or decrease the audio output.
  • Noise Cancel: Activate noise cancel to reduce electromagnetic interference from the environment.
  • Ground Type: Select the appropriate ground type setting for optimal performance in different soil conditions.

3.2 GeoSense-PI Technology and Automatic Ground Balance

The GPX 6000 utilizes GeoSense-PI technology to precisely analyze gold signals and filter out ground noise. The automatic ground balance continuously adapts to changing soil conditions as you sweep the coil, eliminating the need for manual adjustments.

Man using Minelab GPX 6000 in a rocky, arid environment, with text 'GEOSENSE-PI TECHNOLOGY: Quickly and precisely analyzes gold signals buried in the ground, so you'll be able to hear all gold pieces clearly.'

Figure 5: The GeoSense-PI technology ensures clear detection of gold signals by effectively analyzing and filtering ground interference.

3.3 Detecting Gold

Sweep the search coil slowly and steadily over the ground, keeping it as close to the surface as possible. The detector will emit an audio signal when gold is detected. The GPX 6000 is capable of accurately locating small gold fragments to large nuggets.

Video 1: Demonstrates the Minelab GPX 6000 in action, highlighting its ability to detect various types of gold in different environments. This video shows the detector's smart and all-gold detection capabilities.

Man smiling while holding a small gold nugget, with the Minelab GPX 6000 control unit in the foreground, text 'ALL GOLD, ALL THE TIME: Small fragments to large nuggets and everything in between can be accurately located with this one detector.'

Figure 6: The GPX 6000 is capable of accurately locating a wide range of gold sizes, from small fragments to large nuggets.

4. Maintenance

  • Cleaning: After each use, wipe down the detector, especially the coil, with a damp cloth to remove dirt and debris. Avoid using harsh chemicals.
  • Coil Care: The 11" Monoloop and 14" Double-D coils are waterproof up to 3 feet (1 meter). However, the control unit is not waterproof. Avoid submerging the control unit.
  • Battery Storage: For long-term storage, ensure the Lithium Ion battery is partially charged (around 50%) and store it in a cool, dry place.
  • General Storage: Store the detector in a clean, dry environment, away from extreme temperatures and direct sunlight.

5. Troubleshooting

ProblemPossible CauseSolution
No powerBattery discharged or not connected properly.Ensure battery is fully charged and correctly inserted.
Erratic signals / False signalsHigh electromagnetic interference (EMI) or highly mineralized ground.Perform Noise Cancel. Adjust Ground Type setting. Move away from power lines or other electronic devices.
No audio from headphonesHeadphones not paired or low battery.Ensure headphones are charged and correctly paired via Bluetooth. Check volume settings.
Poor detection depthIncorrect ground balance or coil not parallel to ground.Ensure automatic ground balance is active. Maintain a consistent, low sweep height.

6. Specifications

FeatureDetail
BrandMINELAB
Model Number3300-0500
Item Weight4.6 Pounds (2.1 kg)
Product Dimensions61"L x 15.3"W x 5.2"H (Extended)
Adjustable LengthYes (26.5" / 67 cm to 61" / 155 cm)
Power SourceBattery Powered (1 Lithium Ion battery included)
Battery Life8 Hours
Operating Frequency12 KHz
International Protection RatingIP54 (Control unit not waterproof, coils waterproof up to 3 ft/1m)
Display TypeLCD
Included Coils11" Monoloop, 14" Double-D
Diagram showing Minelab GPX 6000 in collapsed length of 26.5 inches / 67 cm and extended length of 61 inches / 155 cm, with detector weight of 4.6 lb / 2.1 kg.

Figure 7: The adjustable length and lightweight design of the GPX 6000 for portability and ease of use.

7. Warranty and Support

The Minelab GPX 6000 comes with a 3-year warranty, ensuring peace of mind regarding product quality and performance. This warranty covers manufacturing defects and ensures the detector's durability even in harsh environments.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Minelab's global support. Detailed contact information can typically be found on the official Minelab website or through your authorized dealer.

Man using a metal detector in a field, with text 'BUILT BY MINELAB'.

Figure 8: Minelab's commitment to quality and support for its products.

© 2025 Minelab. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.