Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Instant AP 100 HEPA Air Purifier Replacement Filter. Designed to fit the Instant Air Purifier AP 100 model, this filter is a crucial component of an advanced filtration system, contributing to cleaner indoor air quality.
Product Overview
The Instant AP 100 HEPA Air Purifier Replacement Filter features advanced air cleaning technology to enhance your indoor environment. It is designed to capture various airborne particles and reduce odors.
- Advanced Filtration: Incorporates HEPA-13 and Activated Carbon layers for comprehensive air purification.
- Air Purification Capacity: Filters up to 615 square feet per hour, or 126 square feet 5 times per hour, effectively removing pollen, tobacco smoke, dust, and other airborne particles.
- Odor Reduction: The activated carbon filter layer assists in reducing unpleasant smells.
- Extended Filter Life: This 3-in-1 filter is designed to last at least 8 months when the air purifier operates continuously in eco mode.
- Filter Change Indicator: Compatible Instant Air Purifiers are equipped with a filter usage measurement system that indicates when replacement is necessary.
Image: Instant AP 100 HEPA Air Purifier Replacement Filter. This cylindrical filter features a blue and white mesh exterior, with black plastic rings at the top and bottom, and a black mesh interior.
Setup and Installation
Replacing the filter in your Instant AP 100 Air Purifier is a straightforward process. Ensure the air purifier is unplugged before proceeding.
- Power Off: Unplug the Instant AP 100 Air Purifier from the power outlet.
- Access Filter Compartment: Refer to your air purifier's user manual for specific instructions on how to open the filter compartment. This typically involves removing a cover or panel.
- Remove Old Filter: Carefully remove the used filter from the compartment. Dispose of the old filter according to local regulations.
- Insert New Filter: Place the new Instant AP 100 HEPA Replacement Filter into the compartment, ensuring it is seated correctly. Follow any directional arrows on the filter or in your air purifier's manual.
- Close Compartment: Securely close the filter compartment cover or panel.
- Restore Power: Plug the air purifier back into the power outlet.
- Reset Filter Indicator (if applicable): If your air purifier has a filter reset function, follow the instructions in your air purifier's manual to reset the filter change indicator.
Operating Considerations
Once the new filter is installed, your Instant AP 100 Air Purifier is ready for operation. The filter works continuously to clean the air as the unit runs.
- Ensure the air purifier is placed in an open area, away from obstructions, to allow for optimal airflow.
- The effectiveness of the filter is directly related to the air purifier's operational settings (e.g., fan speed, mode).
- Regular use of the air purifier with this filter will contribute to a reduction in airborne particles and odors.
Maintenance
Proper maintenance of your replacement filter ensures continued optimal performance of your Instant AP 100 Air Purifier.
- Filter Replacement Frequency: The filter typically lasts at least 8 months under continuous eco mode operation. Actual lifespan may vary based on air quality and usage.
- Filter Change Indicator: Pay attention to the filter change indicator on your Instant Air Purifier. This indicator provides the most accurate timing for replacement based on actual usage.
- Do Not Wash: The HEPA and activated carbon filters are not washable and should not be cleaned with water or other liquids. Attempting to wash the filter will damage its structure and effectiveness.
- Regular Inspection: Periodically inspect the filter for visible signs of heavy dust accumulation. While the indicator is primary, visual inspection can provide additional insight.
Troubleshooting
If you encounter issues related to your filter or air purifier performance, consider the following:
- Reduced Airflow or Purification: If you notice a decrease in airflow or the air quality does not seem to improve, the filter may be clogged and require replacement, even if the indicator has not yet activated.
- Persistent Odors: If odors persist despite air purifier operation, the activated carbon layer of the filter may be saturated. Replace the filter.
- Filter Indicator Light Remains On After Replacement: Ensure you have correctly reset the filter indicator on your air purifier after installing a new filter. Refer to your air purifier's manual for specific reset instructions.
- Unusual Noises: Ensure the filter is properly seated in its compartment. A loose filter can cause rattling or other unusual sounds.
Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 7.06 x 7.06 x 5.76 inches (7.06"L x 7.06"W x 5.76"Th) |
| Item Weight | 1.08 pounds (1.1 Pounds) |
| Brand | Instant |
| Item Model Number | 210-0060-01 |
| Material | Plastic |
| MERV Rating | 13 |
| Compatible Devices | Instant AP 100 Air Purifier |
| UPC | 810028584914 |
| Included Components | Instant HEPA Air Purifier Replacement Filter for Home Allergens & Pet Danders, Removes 99.9% of Dust, Smoke, & Pollen with Plasma Ion Technology, For AP 100 |
Warranty and Support
This product is covered by a manufacturer's warranty. For detailed information regarding warranty terms and conditions, please refer to the documentation included with your original Instant Air Purifier or visit the official Instant website.
For technical support, replacement parts, or further assistance, please contact Instant customer service through their official website or the contact information provided with your air purifier.
Important Chemical Information: This product contains iron, chromium, manganese, nickel, phosphorus, aluminum, carbon black, titanium dioxide and/or PFAS, and may contain other chemicals. For more information about chemicals in this product, visit instantpot.com/pages/cookwarechemicaldisclosures.
