Introduction
This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your New Bright 1:14 R/C 4X4 Jeep Gladiator Rock Crawler. Please read this manual thoroughly before first use to ensure proper function and to prevent damage.
Image: The New Bright 1:14 R/C 4X4 Jeep Gladiator Rock Crawler, showcasing its robust design and large off-road tires from a front three-quarter perspective.
Safety Information
Adherence to the following safety guidelines is crucial for preventing injury and damage to the product.
- Battery Safety: Do not mix old and new batteries. Do not mix alkaline, standard, or rechargeable batteries.
- FCC Compliance: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- Interference: This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
- Interference Correction: If harmful interference to radio or television reception occurs, try to correct it by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment into an outlet on a different circuit. Consult a dealer or experienced radio/TV technician for assistance.
What's in the Box
Verify that all components are present upon unboxing:
- R/C Vehicle (Jeep Gladiator Rock Crawler)
- R/C Controller
- Internal Lithium Ion Battery (pre-installed in vehicle)
- 2 AA Batteries (for controller)
Image: The product as it appears in its retail packaging, showing the vehicle and controller, along with key features highlighted on the box.
Setup
1. Controller Battery Installation
- Locate the battery compartment on the back of the R/C Controller.
- Open the battery compartment cover.
- Insert the 2 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
2. Vehicle Battery Charging
The vehicle is equipped with an internal USB rechargeable Lithium Ion battery. It may require charging before first use.
- Locate the USB charging cable integrated into the vehicle. This is typically found on the underside or within a hidden compartment.
- Connect the USB plug to any standard USB power source (e.g., computer USB port, USB wall adapter, power bank).
- The charging indicator light on the vehicle will illuminate during charging and turn off or change color when fully charged. Refer to the specific indicator behavior on the vehicle for details.
- Charging time may vary. Do not overcharge the battery.
- Once charged, disconnect the USB cable and secure it back into its storage position on the vehicle.
Operating Instructions
1. Powering On
- Ensure both the vehicle and the controller have fresh or fully charged batteries.
- Turn on the power switch on the R/C vehicle. The power switch is usually located on the chassis.
- Turn on the power switch on the R/C controller.
- The vehicle and controller will automatically pair using 2.4GHz technology. This allows multiple vehicles to be operated simultaneously without interference.
2. Driving the Vehicle
The controller provides full function steering for precise control.
- Forward/Backward: Use the throttle trigger or joystick to move the vehicle forward or backward.
- Left/Right Steering: Use the steering wheel or directional stick to turn the vehicle left or right.
- 4-Wheel Drive: The 4-wheel drive system provides enhanced traction and capability for tackling various terrains and obstacles.
- Superflex Chassis: The superflex chassis allows for significant articulation, improving performance over uneven surfaces.
Image: Left: A side profile of the R/C Jeep Gladiator, highlighting its large wheels and suspension. Right: A front view of the R/C Jeep Gladiator, showing its headlights and grille design.
Maintenance
Proper maintenance will extend the life and performance of your R/C vehicle.
- Cleaning: After use, especially in dirty or dusty conditions, gently wipe down the vehicle with a soft, dry cloth. Do not use water or harsh chemicals.
- Battery Care: Always turn off the vehicle and controller when not in use. For long-term storage, ensure the vehicle's internal battery is partially charged (not fully charged or fully depleted). Remove AA batteries from the controller if storing for extended periods.
- Storage: Store the vehicle and controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the vehicle for loose screws, damaged parts, or debris caught in the wheels or chassis.
Image: Left: A rear view of the R/C Jeep Gladiator, showing its taillights and the "New Bright" license plate. Right: A top-down view of the R/C Jeep Gladiator, illustrating the interior layout and overall vehicle proportions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not respond to controller. |
|
|
| Vehicle moves slowly or erratically. |
|
|
| Front tires are locked up or do not work. |
|
|
Specifications
| Model Number | 61447U |
| Product Dimensions | 17.75 x 10 x 10.5 inches |
| Item Weight | 19.75 pounds |
| Recommended Age | 6 years and up |
| Batteries Required | 1 Lithium Ion (included, internal), 2 AA (included, for controller) |
| Technology | 2.4GHz (allows multiple vehicle operation) |
| Drive Type | 4-Wheel Drive |
| Chassis Type | Superflex Chassis |
Warranty and Support
For warranty information, technical support, or replacement parts, please contact New Bright customer service. Refer to the product packaging or the official New Bright website for the most current contact details.
New Bright Website: www.newbright.com