FREEZE2TRIM Air Pure Pro Portable Air Purifier User Manual

1. Introduction

The FREEZE2TRIM Air Pure Pro is a portable air purifier designed to improve indoor air quality in standard-sized rooms (100-215 sq ft). It features True HEPA air filtration technology and carbon filters to capture various airborne particles and odors. This manual provides essential information for the safe and effective use of your air purifier.

Image: Front view of the Air Pure Pro Portable Air Purifier.

2. Safety Information

• Read all instructions before using the appliance.
• Do not operate any appliance with a damaged cord or plug.
• Do not use the appliance in wet or humid environments.
• Keep the appliance away from heat sources and direct sunlight.
• Ensure proper ventilation around the unit.
• Unplug the appliance before cleaning or performing any maintenance.

3. Package Contents

Please check the box for the following items:

• Air Purifier Unit
• True HEPA Air Filter (pre-installed or inside the unit)
• Power Adapter
• Essential Oil Pad
• User Manual

4. Setup Guide

4.1. Filter Installation

1. Unscrew the bottom cover of the air purifier.
2. Remove the True HEPA filter. If it is wrapped in plastic, remove all packaging.
3. Place the unwrapped filter back into the unit.
4. Securely screw the bottom cover back onto the unit.

4.2. Power Connection

1. Connect the power adapter to the power port on the back of the air purifier.
2. Plug the power adapter into a suitable electrical outlet.

4.3. Essential Oil Diffuser Setup

1. Locate the essential oil pad compartment on the top of the air purifier.
2. Add a few drops of your preferred essential oil onto the essential oil pad.
3. Place the pad back into the compartment and close it.

5. Operating the Air Purifier

5.1. Control Panel Overview

The control panel features touch-sensitive buttons and a digital display to manage all functions.

Image: The control panel is located on the front of the unit.

5.2. Power On/Off

Press the power button on the control panel to turn the unit on or off.

5.3. Timer Function

Press the timer button to set the operating duration. Options typically include 2, 4, 6, or 8 hours. The unit will automatically shut off after the set time.

5.4. Fan Speed & Modes

Cycle through different fan speeds: Low, Medium, High. The unit may also feature a Sleep Mode for quiet operation and an Auto Mode that adjusts fan speed based on air quality.

5.5. Atmosphere Light

The air purifier includes an RGB atmosphere light feature. Press the light button to cycle through different colors or turn the light off. This can also function as a night light.

Image: Air Pure Pro operating with its atmosphere light in a bedroom setting.

5.6. Air Quality Indicator (PM2.5 Detection)

The unit features a PM2.5 sensor and an air quality indicator light that changes color based on the detected air quality:

• Green: Good air quality (PM2.5 levels 0-75)
• Yellow: Moderate air quality (PM2.5 levels 76-150)
• Red: Poor air quality (PM2.5 levels >150)

The digital display will show the current PM2.5 value.

6. Maintenance

6.1. Filter Replacement

The air purifier is equipped with a filter replacement reminder. When the filter icon on the control panel turns red, it indicates that the filter needs to be replaced. Filters typically last for approximately 1440 hours of operation.

1. Unplug the air purifier.
2. Unscrew the bottom cover and remove the old filter.
3. Insert a new True HEPA filter (ensure all packaging is removed).
4. Securely screw the bottom cover back on.
5. Plug in the air purifier. Press and hold the filter reset button (often combined with the power button or a dedicated icon) for a few seconds until the indicator light resets.

7. Troubleshooting

• Unit does not turn on: Ensure the power adapter is securely plugged into both the unit and a working electrical outlet.
• Reduced airflow: Check if the filter is clogged and needs replacement. Ensure there are no obstructions around the air intake or outlet.
• Unusual noise: Verify the filter is correctly installed and the bottom cover is securely fastened.
• Filter indicator remains red after replacement: Perform the filter reset procedure as described in Section 6.1.

8. Product Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the contact details provided with your purchase documentation or visit the official FREEZE2TRIM website. Keep your purchase receipt for warranty claims.