New Bright 1:10 R/C 4X4 Slide Winder, Gold User Manual

Introduction

The New Bright 1:10 R/C 4X4 Slide Winder is a remote-controlled vehicle designed for unique movement capabilities. It features side-to-side sliding, gliding, spinning, and vertical movement. This multi-function vehicle is equipped with a durable steel body, working lights, and a 2.4GHz control system. It comes ready to run with a 9.6V Internal Lithium Ion battery, rechargeable via USB.

Image: The New Bright 1:10 R/C 4X4 Slide Winder in gold, showcasing its robust design and large, multi-directional wheels.

Safety Information

Please read and understand all safety instructions before operating the vehicle.

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Package Contents

Ensure all items are present in the package:

• 1:10 R/C 4X4 Slide Winder Vehicle
• Remote Control Transmitter
• 9.6V Internal Lithium Ion Battery (pre-installed)
• USB Charging Cable
• Instruction Manual (this document)

Image: The New Bright 1:10 R/C 4X4 Slide Winder displayed in its retail packaging, showing the vehicle and remote control.

Setup

1. Charging the Vehicle Battery

The vehicle is equipped with a 9.6V Internal Lithium Ion battery. Before first use, fully charge the battery.

1. Locate the USB charging port on the vehicle.
2. Connect the provided USB charging cable to the vehicle's charging port.
3. Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer USB port.
4. The charging indicator light will illuminate during charging and turn off or change color when fully charged (refer to vehicle for specific indicator behavior).
5. Charging typically takes approximately 1-2 hours. Do not overcharge.

2. Installing Transmitter Batteries

The remote control transmitter requires batteries (typically AA, not specified in product data, assuming standard for RC). Ensure correct polarity.

1. Open the battery compartment on the back of the remote control.
2. Insert the required number of new batteries, matching the (+) and (-) symbols.
3. Close the battery compartment securely.

Operating Instructions

This vehicle utilizes 2.4GHz technology for enhanced range and interference-free operation.

1. Pairing the Vehicle and Transmitter

1. Turn on the vehicle using the power switch.
2. Turn on the remote control transmitter.
3. The transmitter and vehicle should automatically pair. A light on the transmitter may stop blinking or turn solid to indicate a successful connection.
4. If pairing fails, turn both off and repeat the steps.

2. Basic Controls

• Forward/Backward: Use the throttle trigger/stick on the transmitter.
• Steering (Left/Right): Use the steering wheel/stick on the transmitter.
• Working Headlights: The vehicle is equipped with functional headlights that illuminate during operation.

Image: Side profile of the R/C vehicle, highlighting its suspension and wheel design, crucial for its unique movement capabilities.

3. Advanced Movement (Slide-to-Side Action)

The unique wheel design allows for multi-directional drifting and sliding.

• Specific controls for side-to-side movement may vary by transmitter design. Refer to the transmitter's markings or a dedicated button for this function.
• Practice in an open area to master the sliding, gliding, and spinning maneuvers.
• The vehicle can also move up and down, indicating a flexible chassis or adjustable suspension. Experiment with controls to activate this feature.

Image: Top-down view of the R/C vehicle, showing the chassis layout and the intricate design of its multi-directional wheels.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the vehicle after use. Avoid water or harsh chemicals.
• Battery Care:
  • Always fully charge the internal Lithium Ion battery before storage.
  • Do not store the vehicle with a completely depleted battery.
  • Remove batteries from the transmitter if not in use for extended periods.
• Storage: Store the vehicle and transmitter in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official New Bright website. Keep your purchase receipt as proof of purchase.

Manufacturer: New Bright