Introduction
Thank you for choosing the Lepro WL5000 Solar Motion Activated Security Light. This product is designed to provide efficient and reliable outdoor lighting using solar power, enhancing security and visibility around your home. It features a separate solar panel for optimal sun exposure, three adjustable light heads for wide coverage, and an intelligent motion sensor for automated operation. Please read this manual carefully before installation and use to ensure proper function and longevity of your device.
Product Overview and Components
The Lepro WL5000 security light system consists of the main light unit with three adjustable heads and a separate solar panel connected by a cable. Key components are illustrated below:
- Main Light Unit: Houses 72 ultra-bright LEDs and a PIR motion sensor.
- Adjustable Light Heads: Three heads that can be adjusted vertically and horizontally for 270° wide lighting.
- Separate Solar Panel: Converts sunlight into electricity for charging the internal battery.
- Connection Cord: 16ft (4.8m) cord connecting the solar panel to the main light unit.
- Mounting Hardware: Includes screws, wall plugs, and wall brackets for installation.
Key Features
- Wide Lighting & Ultra Bright: Equipped with 72 ultra-bright LEDs, providing 1000 lumens of 6500K daylight. The three adjustable heads offer a 270° wide lighting angle, illuminating larger areas.
Figure 2: Adjustable Light Heads and Brightness. The image illustrates the flexibility of the three light heads, capable of adjusting to provide a wide 270° lighting angle. Key specifications like 1000 lumens, 6500K color temperature, and 72 LEDs are highlighted. - Convenient Solar Charging: The separate solar panel allows for flexible placement in direct sunlight, maximizing energy absorption. This design reduces carbon emissions and electricity costs.
Figure 3: Separate Solar Panel Advantage. This image compares the Lepro light with its separate solar panel, allowing for optimal sun exposure on a roof, versus a light with an integrated panel that may have limited energy absorption due to its wall-mounted position. - Motion Sensor Lights: An upgraded PIR motion sensor detects movement within a 16-26ft distance and a 120° detection angle. The light automatically turns on when motion is detected at night and turns off after 20 seconds of no movement.
Figure 4: Motion Sensor Detection. The diagram shows the 120° detection angle and 16-26ft detection distance of the PIR motion sensor, indicating its effectiveness in sensing human or animal movement. - IP65 Waterproof and Durable: Constructed from durable GPPS+ABS material, the light is IP65 waterproof, heat-resistant, and frost-resistant, ensuring reliable operation in various weather conditions.
Figure 5: All-Weather Durability. This image highlights the IP65 waterproof rating, heat resistance, and frost resistance of the light, ensuring its functionality in diverse environmental conditions.
Product Video Overview
Video 1: Lepro Solar Outdoor Light, Separate Solar Panel. This video demonstrates the key features and functionality of the Lepro solar security light, including its motion detection and adjustable light heads.
Setup and Installation
The Lepro WL5000 is designed for easy installation without the need for household electrical wiring. Follow these steps for optimal performance:
- Choose a Location: Select an outdoor location for the main light unit, such as a front door, eaves, garage, or courtyard. Ensure the area where the solar panel will be placed receives direct sunlight for at least 8 hours a day.
- Mount the Solar Panel: Fix the solar panel to a location exposed to direct sunlight using the provided screws and wall plugs. The separate panel and 16ft cord allow flexibility, for example, mounting the panel on a roof.
- Mount the Light Unit: Fix the main light unit to an exterior wall at a recommended height of 1.5-3.5m (5-12ft) using the provided screws and wall plugs.
- Connect the Cable: Plug the connection cable from the solar panel into the main light unit.
- Activate the Switch: Locate the power switch on the back of the main light unit and turn it to the "ON" position.
Operating Instructions
The Lepro WL5000 operates automatically based on light conditions and motion detection:
- Daytime Operation: During the day, the light will remain off and the solar panel will charge the internal battery when exposed to sunlight.
- Nighttime Operation: At night, the motion sensor light will automatically turn ON when triggered by human or animal movement within its detection range.
- Automatic Shut-off: The light will automatically turn OFF approximately 20 seconds after no movement is detected. If motion is continuously detected, the light will remain on.
Maintenance
To ensure optimal performance and extend the lifespan of your Lepro solar light, consider the following maintenance tips:
- Clean the Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and efficient charging.
- Clear Obstructions: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak charging hours.
- Inspect Connections: Periodically check the connection cable between the solar panel and the light unit for any signs of wear or damage.
- Winter Care: In areas with heavy snow, clear snow from the solar panel to allow for charging. The light is frost-resistant, but prolonged snow cover will prevent charging.
Troubleshooting
If you encounter issues with your Lepro solar light, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. |
|
|
| Light stays on during the day. |
|
|
| Motion sensor is not detecting movement. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Lepro |
| Model Number | PR640004-DW |
| Light Source Type | LED (72 LEDs) |
| Brightness | 1000 Lumens |
| Light Color | 6500K Daylight White |
| Power Source | Solar Powered |
| Voltage | 5.4 Volts |
| Wattage | 12 Watts |
| Motion Sensor Detection Angle | 120° |
| Motion Sensor Detection Distance | 16-26 ft |
| Lighting Angle | 270° (with adjustable heads) |
| Water Resistance Level | IP65 Waterproof |
| Material | GPPS+ABS |
| Product Dimensions | 11.1"L x 4.65"W x 5.87"H |
| Item Weight | 1.1 pounds (500 Grams) |
| Battery Type | 1 Lithium Ion battery required |
| Average Battery Life | 12 months |
Warranty and Support
Lepro provides a 12-month after-sales service warranty for this product. If you encounter any issues or have questions regarding your Lepro WL5000 Solar Motion Activated Security Light, please contact Lepro customer support for assistance. Refer to the product packaging or the official Lepro website for the most current contact information.
For additional resources, you may visit the official Lepro store: Lepro Store on Amazon.
