1. Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Arebos Inflatable Whirlpool Barcelona Hot Tub. Designed for both indoor and outdoor use, this hot tub offers a relaxing massage experience for up to 6 people. It features 130 massage jets and an integrated heating system capable of reaching up to 42°C. Please read this manual thoroughly before installation and use.
2. Safety Information
Important Safety Instructions: When installing and using this electrical equipment, basic safety precautions should always be followed, including the following:
- Read all instructions before using this product.
- Do not immerse the control unit in water.
- Ensure the electrical supply meets the specifications (230 Volt).
- Always supervise children around the hot tub.
- Do not use the hot tub if the temperature is below 4°C (40°F) or above 40°C (104°F).
- Avoid using extension cords. Connect directly to a grounded outlet.
- Do not operate the hot tub if there is any damage to the power cord or control panel.
- Consult a doctor before use if you have health conditions, are pregnant, or are elderly.
- Do not use electrical appliances near the hot tub.
- Always drain and clean the hot tub regularly to maintain hygiene.
3. Package Contents
Verify that all components listed below are present in your package. If any parts are missing or damaged, please contact customer support.
Image: All components included with the Arebos Inflatable Whirlpool Barcelona Hot Tub. This includes the hot tub unit, insulating cover, protective mat, filter pump, filter cartridge, repair patches, and inflation hose.
- 1 x Inflatable Hot Tub Unit
- 1 x Insulating Cover
- 1 x Protective Mat
- 1 x Filter Pump
- 1 x Filter Cartridge (with 80 fins)
- 1 x Set of Repair Patches
- 1 x Inflation Hose
- 1 x User Manual (this document)
4. Setup Instructions
Follow these steps to set up your Arebos Inflatable Whirlpool Barcelona Hot Tub. No special tools are required for inflation.
- Choose a Location: Select a flat, stable, and level surface for your hot tub. Ensure the area can support the weight of the hot tub filled with water and occupants (approximately 910 kg + occupants). The location should be near a grounded electrical outlet and a water source.
- Lay Down Protective Mat: Place the provided protective mat on the chosen surface. This helps protect the bottom of the hot tub from punctures and provides insulation.
- Unfold Hot Tub: Carefully unfold the hot tub unit on top of the protective mat.
-
Inflate the Hot Tub: Connect the inflation hose to the hot tub's inflation valve and to the control unit's inflation port. The hot tub features an automatic inflation function. Turn on the control unit and activate the inflation mode. Inflate until the walls are firm but not over-inflated.
Image: The Arebos hot tub being inflated. Ensure the hot tub is placed on a flat surface before inflation.
-
Install Filter Cartridge: Open the filter housing inside the hot tub and insert the filter cartridge. Ensure it is securely in place.
Image: Detail of the control panel and the filter cartridge location within the hot tub. The filter should be regularly checked and cleaned.
- Fill with Water: Fill the hot tub with fresh water using a garden hose. Fill to the indicated maximum water level line inside the hot tub. Do not overfill.
- Connect Power: Plug the hot tub's power cord into a grounded electrical outlet.
5. Operating Instructions
The control panel allows you to manage all functions of your Arebos hot tub.
Image: The control panel of the Arebos hot tub, showing buttons for heating and bubble functions.
- Power On/Off: Press the power button on the control panel to turn the hot tub on or off.
- Heating Function: Press the heater button to activate the heating system. Use the temperature adjustment buttons (up/down arrows) to set your desired water temperature, up to a maximum of 42°C. The system has an automatic shutdown and standby function.
- Bubble Massage Function: Press the bubble button to activate the 130 hydro-massage jets. Press again to turn off.
- Filtration System: The integrated filtration system operates automatically to keep the water clean. Refer to the maintenance section for filter cleaning and replacement.
6. Maintenance
Regular maintenance ensures the longevity and hygiene of your hot tub.
- Filter Cleaning and Replacement: The hot tub features a filter alarm function that indicates when the filter needs cleaning or replacement. Regularly remove and rinse the filter cartridge with water. Replace the filter cartridge every 1-2 weeks, or more frequently depending on usage and water quality.
- Water Treatment: Use appropriate hot tub chemicals (not included) to maintain proper water chemistry, including pH balance and sanitization. Follow the chemical manufacturer's instructions.
- Draining and Cleaning: Periodically drain the hot tub completely. Clean the interior surfaces with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly before refilling.
-
Cover Usage: Always use the insulating cover when the hot tub is not in use. This helps maintain water temperature, reduces evaporation, and keeps debris out.
Image: The Arebos hot tub with its insulating cover in place. The cover helps retain heat and keeps the water clean.
- Storage: When storing the hot tub for an extended period, ensure it is completely drained, cleaned, and dry. Deflate it and fold it carefully. Store in a dry, protected area away from extreme temperatures.
- Repairing Minor Punctures: If the PVC cover develops small holes, use the provided repair patches to fix them. Clean the area around the puncture, apply the patch firmly, and allow it to cure according to the patch instructions.
7. Troubleshooting
This section addresses common issues you might encounter with your hot tub.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hot tub not heating. | Heater not activated, low water level, dirty filter, or ambient temperature too low. | Ensure heater is on. Check water level and refill if necessary. Clean or replace filter. Ensure hot tub is used within recommended temperature range. |
| Bubbles not working. | Bubble function not activated, or air pump issue. | Press the bubble button on the control panel. If still not working, contact customer support. |
| Water is dirty or cloudy. | Dirty filter, improper water chemistry, or insufficient filtration time. | Clean or replace filter cartridge. Test and adjust water chemistry (pH, sanitizer). Run filtration cycle longer. |
| Hot tub losing air. | Loose valve cap, small puncture, or temperature fluctuations. | Ensure all valve caps are tightly secured. Check for punctures and use repair patches if needed. Air pressure can fluctuate with temperature changes; re-inflate slightly if needed. |
| Control panel error code. | Specific system malfunction. | Refer to the specific error code in a more detailed manual (if available) or contact customer support with the error code. |
8. Specifications
Technical details for the Arebos Inflatable Whirlpool Barcelona Hot Tub.
Image: Diagram illustrating the dimensions of the Arebos Inflatable Hot Tub: 185 cm length, 185 cm width, and 65 cm height.
| Feature | Detail |
|---|---|
| Brand | Arebos |
| Model | Barcelona |
| Color | Grey |
| Product Dimensions (L x W x H) | 185 x 185 x 65 cm |
| Material | Polyethylene (PE), Polyvinyl Chloride (PVC) |
| Voltage | 230 Volt |
| Total Power | 1800 W |
| Assembly Required | No (Self-inflating) |
| Water Capacity | 910 Liters |
| Seating Capacity | Up to 6 people |
| Number of Massage Jets | 130 |
| Max. Water Temperature | 42°C |
| Filter Type | Cartridge filter with 80 fins |
9. Warranty and Support
Your Arebos Inflatable Whirlpool Barcelona Hot Tub comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty duration and coverage details.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Arebos customer service. Contact information can typically be found on the manufacturer's website or on the product packaging. When contacting support, please have your product model (Barcelona) and purchase information ready.
