EVERSECU Mini Analog PTZ Camera Keyboard User Manual

1. Introduction

This manual provides comprehensive instructions for the EVERSECU Mini Analog PTZ Camera Keyboard with 4D Joystick. It covers setup, operation, maintenance, and troubleshooting for controlling AHD/TVI/CVI/CVBS analog high-speed dome cameras, slow dome cameras, zoom cameras, and decoders via RS485 communication. This controller offers precise control and enhanced functionality for your surveillance system.

2. Product Overview

The EVERSECU Mini Analog PTZ Camera Keyboard is a compact yet powerful controller designed for efficient management of analog PTZ cameras. It features a 4D joystick for intuitive control and a numeric keypad for various functions and settings. The device supports multiple protocols and offers robust anti-jamming capabilities.

Figure 2.1: EVERSECU Mini Analog PTZ Camera Keyboard

This image displays the main unit of the EVERSECU Mini Analog PTZ Camera Keyboard, showcasing its compact design, numeric keypad, and the prominent 4D joystick on the right side.

Key Features:

• 4D PTZ joystick for precise control of pan, tilt, zoom, and focus.
• Supports Pelco-D, Pelco-P, and SAMSUNG protocols.
• RS-485 communication interface with strong anti-jamming capabilities.
• Can control up to 128 dome cameras or other terminals within a maximal communication range of 1.5 Km.
• LCD screen for displaying protocol, baud rate, address, and control status.
• Password setup function for enhanced security.
• Lightning protection design on input and output communication interfaces.

3. Specifications

4. Setup

Proper setup of the PTZ keyboard controller is crucial for optimal performance. Follow these steps to connect your controller to your surveillance system.

4.1. Physical Connections

Connect the power adapter to the DC 12V input port on the back of the keyboard. Use RS-485 wiring to connect the keyboard controller to your PTZ cameras or DVR. Ensure correct polarity (RS-485+ to RS-485+ and RS-485- to RS-485-).

Figure 4.1: Rear Connections of the PTZ Keyboard

This image shows the rear panel of the PTZ keyboard controller, highlighting the DC 12V power input and the RS-485 terminal block for connecting to cameras or DVRs.

Figure 4.2: RS-485 Connection Diagram

This diagram illustrates how to connect the PTZ keyboard controller to multiple dome cameras via RS-485, showing the RS-485+ and RS-485- wiring for up to 128 cameras and a DVR.

4.2. Device Addressing and Protocol Configuration

Each camera or device you wish to control must have a unique address set within the range of 1 to 255. Ensure the protocol (Pelco-D, Pelco-P, or SAMSUNG) and baud rate on the keyboard match those of the connected cameras.

1. Set Camera Address: Refer to your camera's manual to set its RS-485 address.
2. Configure Keyboard: Use the keyboard's menu (accessible via the 'MENU' button) to set the corresponding camera address, protocol, and baud rate.

For compatible PTZ cameras, please search ASINs: B0CFFNVZ3Z, B07GSXN98H, B07K3TYYRJ, B09H7D64D2.

5. Operating Instructions

The 4D joystick and keypad provide comprehensive control over your PTZ cameras.

Figure 5.1: 4D Joystick Detail

This close-up image highlights the 4D joystick, showing its ability to pan, tilt, and twist for zoom control.

5.1. Basic PTZ Control

• Pan/Tilt: Move the joystick left, right, up, or down to control the camera's horizontal (pan) and vertical (tilt) movement. The speed of movement is variable based on how far the joystick is pushed.
• Zoom: Twist the top of the joystick clockwise to zoom in (TELE) and counter-clockwise to zoom out (WIDE).
• Focus: Use the 'FAR' and 'NEAR' buttons to adjust the camera's focus.
• Iris: Use the 'OPEN' and 'CLOSE' buttons to adjust the camera's iris (aperture).

5.2. Preset Positions

Preset positions allow you to save specific camera angles and zoom levels for quick recall.

1. Setting a Preset:
   • Adjust the camera to the desired position, zoom, and focus.
   • Press the 'PRESET' button.
   • Enter a preset number (e.g., 1-255) using the numeric keypad.
   • Press 'ENTER' or 'SET' (refer to specific camera protocol for confirmation).
2. Recalling a Preset:
   • Press the 'CALL' button.
   • Enter the desired preset number.
   • Press 'ENTER' or 'CALL' again.

5.3. Tour Routes

The keyboard supports setting up to four tour routes, each with a maximum of 16 preset positions. Dwell time and speed for each preset can be programmed.

1. Setting a Tour:
   • Press the 'TOUR' button.
   • Select a tour number (e.g., 1-4).
   • Add desired presets to the tour, specifying dwell time and speed for each.
   • Save the tour.
2. Activating a Tour:
   • Press the 'TOUR' button.
   • Select the desired tour number.
   • Press 'ENTER' or 'CALL' to start the tour.

5.4. Other Functions

• Menu Access: Press the 'MENU' button to access advanced settings and configurations.
• Camera Selection: Use the 'CAM' button and numeric keypad to select the camera you wish to control.
• Disabling Beep Sound: To disable the audible beep sound that occurs with each key press or joystick movement, enter '999' followed by 'AUX'.

6. Maintenance

To ensure the longevity and optimal performance of your EVERSECU PTZ Camera Keyboard, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the surface of the keyboard. Avoid using abrasive cleaners, solvents, or strong chemicals, as they may damage the finish or internal components.
• Environment: Operate the keyboard within the specified ambient temperature and humidity ranges. Avoid exposing the device to extreme temperatures, direct sunlight, or high moisture environments.
• Power Supply: Always use the provided DC 12V -1A power adapter. Disconnect power when the device is not in use for extended periods.
• Cable Management: Ensure all cables (power, RS-485) are securely connected and not under strain. Avoid bending cables sharply or placing heavy objects on them.

7. Troubleshooting

If you encounter issues with your EVERSECU PTZ Camera Keyboard, refer to the following common troubleshooting steps:

7.1. No Control Over Camera

• Check Connections: Verify that the RS-485 wiring is correctly connected to both the keyboard and the camera, ensuring correct polarity (+ to + and - to -).
• Power: Ensure the keyboard and the camera are both powered on.
• Protocol and Baud Rate: Confirm that the communication protocol (Pelco-D, Pelco-P, SAMSUNG) and baud rate set on the keyboard match those configured on the camera.
• Camera Address: Ensure the camera address selected on the keyboard matches the physical address set on the camera.
• Cable Length: While the maximum communication range is 1.5 km, excessive cable length or poor quality cabling can lead to signal degradation.

7.2. Persistent Beeping Sound

• The keyboard produces an audible beep with each key press or joystick movement. To disable this sound, enter the sequence '999' followed by pressing the 'AUX' button.

7.3. Joystick Movement Issues

• If the joystick feels stiff or exhibits a bias in movement (e.g., consistently drifting in one direction), ensure the joystick is clean and free of debris. If the issue persists, it may indicate a hardware anomaly.

7.4. Compatibility

This controller is designed for analog PTZ cameras using RS485 communication. It is not compatible with IP cameras or other digital camera systems that do not utilize RS485 for control.

8. Warranty and Support

EVERSECU products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the product packaging or contact EVERSECU customer support directly.

8.1. Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please visit the official EVERSECU website or contact their customer service department. Keep your purchase receipt and product model information (B08YVQ4XLC) ready when contacting support.

You can find more information and contact details on the EVERSECU Store on Amazon.