Elation Fuze Pendant LED Pendant Light User Manual

1. Introduction

Thank you for choosing the Elation Fuze Pendant LED Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before attempting to install or operate the device to ensure proper use and to prevent damage or injury.

The Elation Fuze Pendant is a high-performance 230W Full Spectrum RGBWL LED pendant fixture designed for professional lighting applications, offering versatile color mixing and precise control.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.

• Always disconnect the fixture from the main power supply before performing any service or maintenance.
• Ensure the power source matches the voltage requirements of the fixture.
• This product must be installed by a qualified electrician in accordance with all local and national electrical codes.
• Do not operate the fixture if the power cord is damaged.
• Avoid direct eye exposure to the light source when the fixture is operating.
• Ensure adequate ventilation around the fixture to prevent overheating.
• Do not modify the fixture or use non-approved accessories.
• This fixture is designed for indoor use only.

3. Package Contents

Verify that your package contains the following items:

• Elation Fuze Pendant LED Pendant Light fixture
• Power Cord
• Mounting Hardware (if applicable)
• User Manual (this document)

If any items are missing or damaged, please contact your dealer immediately.

4. Setup and Installation

4.1 Mounting

The Elation Fuze Pendant is designed for Ceiling Mount installation. Ensure the mounting surface is structurally sound and capable of supporting the weight of the fixture. Use appropriate mounting hardware (not always included) and follow all local building codes.

• Identify a suitable mounting location on the ceiling, ensuring it is clear of obstructions and provides adequate space for ventilation.
• Securely attach the mounting bracket (if provided) to the ceiling using appropriate fasteners.
• Carefully attach the Fuze Pendant fixture to the installed mounting bracket, ensuring all connections are tight and secure.
• Verify that the fixture is stable and cannot accidentally detach.

4.2 Electrical Connection

This fixture operates on Corded Electric power. All electrical connections must be made by a qualified electrician.

• Ensure the main power supply is turned OFF at the circuit breaker before making any electrical connections.
• Connect the power cord to a suitable power outlet, ensuring proper grounding.
• If using DMX control, connect a DMX cable from your DMX controller to the DMX input of the fixture. Daisy-chain additional fixtures as needed.
• Once all connections are secure, restore power to the circuit.

5. Operating Instructions

The Elation Fuze Pendant features a 230W Full Spectrum RGBWL LED engine, offering a wide range of color possibilities and precise control.

5.1 Initial Power-Up

Upon applying power, the fixture will perform a self-test and then display its current operating mode or DMX address. Refer to the display and control buttons for navigation.

5.2 DMX Control

The Fuze Pendant is primarily controlled via DMX512. Set the DMX address using the onboard menu system. Consult the DMX chart (usually found in a separate appendix or on the manufacturer's website) for specific channel functions, including:

• Dimmer control
• RGBWL color mixing
• Strobe effects
• Color macros
• Special effects

5.3 Standalone Operation

The fixture may offer standalone modes accessible via the onboard menu, such as:

• Static Color Mode: Select a fixed color.
• Color Change Mode: Automatic color transitions.
• Sound Active Mode: Reacts to ambient sound (if equipped).

Refer to the fixture's menu structure for detailed instructions on selecting and customizing these modes.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Elation Fuze Pendant.

6.1 Cleaning

• Exterior: Clean the exterior casing with a soft, lint-free cloth. For stubborn dirt, use a slightly damp cloth. Do not use abrasive cleaners or solvents.
• Optics: Gently clean the lens with a soft, dry cloth specifically designed for optical surfaces. Avoid touching the lens directly with fingers.
• Ventilation Openings: Periodically check and clean ventilation openings to ensure proper airflow and prevent dust buildup. Use compressed air if necessary.

6.2 Inspection

• Regularly inspect the power cord for any signs of damage, fraying, or kinks. Replace immediately if damaged.
• Check all mounting hardware for tightness and security.
• Ensure all DMX and power connections are secure.

Always disconnect power before performing any cleaning or inspection.

7. Troubleshooting

If you encounter issues with your Elation Fuze Pendant, refer to the table below for common problems and solutions.

If the problem persists after attempting these solutions, please contact Elation Lighting customer support.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

The Elation Fuze Pendant LED Pendant Light comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, unauthorized modifications, accidents, or improper installation.

Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For technical support, service, or warranty inquiries, please contact Elation Lighting customer service:

• Website: www.elationlighting.com
• Email: Refer to the official website for current contact information.
• Phone: Refer to the official website for current contact information.

When contacting support, please have your product model number (FUZE PENDANT) and proof of purchase readily available.