TBI Pro Solar Outdoor Motion Sensor Flood Light (Model 1H-1pac) User Manual

Introduction

Thank you for choosing the TBI Pro Solar Outdoor Motion Sensor Flood Light. This manual provides essential information for the safe and efficient operation of your new solar light. Please read it thoroughly before installation and retain it for future reference.

Important Safety Information

• Ensure the mounting surface is stable and can support the weight of the light.
• Do not disassemble or modify the product. This may void the warranty and pose safety risks.
• Keep the solar panel clean to ensure optimal charging efficiency.
• Avoid direct eye exposure to the LED light when it is operating at full brightness.
• Dispose of the product and its battery responsibly according to local regulations.
• This product is designed for outdoor use and is IP65 waterproof. However, avoid submerging it in water.

Package Contents

Please check the package to ensure all items are present:

• TBI Pro Solar Outdoor Motion Sensor Flood Light (1 unit)
• Mounting Screws and Wall Plugs
• User Manual

Product Overview & Key Features

The TBI Pro Solar Outdoor Motion Sensor Flood Light is designed to provide efficient and reliable outdoor illumination. It features a high-capacity solar panel and advanced motion detection technology.

Image: Front view of the TBI Pro Solar Outdoor Motion Sensor Flood Light, showcasing the solar panel, LED arrays, and motion sensor.

• Ultra Bright Illumination: Equipped with 298 LEDs, providing up to 2500 lumens of bright light.
• Wide Angle Lighting: Features a 4-sided design for a 280° wide-angle illumination, covering up to 800 sq ft.
• Enhanced PIR Motion Sensor: Detects motion up to 40 feet, activating the light when movement is sensed. Intelligent design minimizes false triggers from weather.
• High Capacity Battery: Integrated 4400mAh battery ensures extended operation, providing 12+ hours in dim mode.
• Weather Resistant: IP65 waterproof rating, heat-resistant up to 122°F, and frost-resistant down to -4°F for reliable year-round performance.
• Solar Powered: Charges efficiently even in cloudy weather, offering an autonomous lighting solution.

Image: Illustration highlighting the 298 LEDs and 2500 lumens brightness of the solar light.

Image: Diagram showing the 280-degree wide-angle illumination provided by the solar light, compared to a narrower angle from other lights.

Image: Graphic illustrating the 40-foot PIR motion detection range of the solar light.

Image: Visual representation of the light's IP65 waterproof rating, heat resistance up to 122°F, and frost resistance down to -4°F.

Installation Guide

Follow these steps to properly install your TBI Pro Solar Outdoor Motion Sensor Flood Light:

1. Choose a Location: Select a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging. The light should be mounted at a height of 6-10 feet for best motion detection and light coverage.
2. Mark Drill Holes: Hold the light against the desired mounting surface and mark the positions for the two screw holes.
3. Drill Holes: Use a drill to create holes at the marked positions. Insert the provided wall plugs into the holes if mounting on masonry or concrete.
4. Mount the Light: Align the light with the drilled holes and secure it using the provided screws. Ensure it is firmly attached to the surface.
5. Initial Charge: Allow the light to charge in direct sunlight for a full day (8-10 hours) before its first use to ensure the battery is fully charged.

Image: Examples of the solar light installed in various outdoor settings, such as fences, walls, and driveways.

Operating Instructions

The TBI Pro Solar Light features three distinct operating modes, selectable via a button located on the back of the unit. Please select your desired mode before final installation if the switch will be inaccessible.

Image: Visual representation of the three operating modes: Bright Light Mode, Dim All Night Mode, and Double Safety Mode.

Operating Modes:

• Mode 1: Bright Light Mode

  The light remains off at night. When motion is detected, it illuminates at full 2500 lumens brightness for 30 seconds, then turns off.

• Mode 2: Dim All Night Mode

  The light stays on at a continuous dim brightness throughout the entire night, regardless of motion detection.

• Mode 3: Double Safety Mode (Dim + Bright Motion)

  The light stays on at a dim brightness all night. When motion is detected, it switches to full 2500 lumens brightness for 30 seconds, then returns to dim mode.

To change modes, press the button on the back of the unit. Each press cycles through the modes.

Maintenance

• Clean the Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Inspect for Damage: Periodically check the light for any physical damage, loose components, or signs of wear.
• Battery Care: The integrated battery is designed for long life. For optimal performance, ensure the light receives adequate sunlight daily. If storing the light for an extended period, fully charge it first.
• Environmental Considerations: While the light is weather-resistant, extreme conditions (e.g., heavy snow accumulation on the panel) may temporarily affect performance. Clear snow or ice from the panel as needed.

Troubleshooting

Specifications

Image: Diagram showing the physical dimensions of the TBI Pro Solar Light.

Warranty and Customer Support

TBI Pro offers a 2-year extended support for this product. To register your product and activate your extended support, please visit: tbi-store.com/w5

For any questions, technical assistance, or warranty claims, please contact our customer support team:

• Phone/Text: +1 800 674 9229
• Email: support@tbi-pro.com

Please have your model number (1H-1pac) and purchase date ready when contacting support.

Image: Information regarding RaLights R1, customer support contact details, and extended support registration link.