Introduction
This manual provides instructions for the proper use, application, and care of your ev-rhinestones RD-11647 Clear AB Flatback Glass Rhinestones. These high-quality glass rhinestones are designed for various decorative applications, including nail art, DIY crafts, and embellishments. Please read this manual thoroughly before use to ensure optimal results and product longevity.
Safety Information
- Keep rhinestones and adhesives out of reach of children and pets.
- Avoid ingestion. These are small items and pose a choking hazard.
- Use adhesives in a well-ventilated area. Refer to the adhesive manufacturer's safety guidelines.
- Avoid direct contact of adhesives with skin and eyes. In case of contact, rinse immediately with water and seek medical attention if irritation persists.
- Handle rhinestones with care to prevent accidental injury from sharp edges.
Product Overview
The RD-11647 rhinestones are made from high-quality glass, featuring a flat back for easy application with adhesive. They are non-hotfix, meaning they require glue for attachment. The Clear AB (Aurora Borealis) coating provides a multi-faceted, iridescent shine.

Image: A close-up view of the Clear AB Flatback Glass Rhinestones.
Available Sizes and Quantities
The rhinestones are available in various sizes, denoted by 'SS' (Stone Size), and come in different pack quantities:

Image: Visual representation of rhinestone sizes on artificial nails.
| Stone Size | Size in mm | Facets | Packing Details | Net Weight |
|---|---|---|---|---|
| SS3 | 1.2-1.4mm | 6 | 1440pcs (10 gross)/Bag | 6.5g |
| SS4 | 1.5-1.7mm | 6 | 1440pcs (10 gross)/Bag | 6.8g |
| SS5 | 1.7-1.9mm | 6 | 1440pcs (10 gross)/Bag | 8.2g |
| SS6 | 1.9-2.1mm | 8 | 1440pcs (10 gross)/Bag | 10.2g |
| SS8 | 2.3-2.5mm | 8 | 1440pcs (10 gross)/Bag | 17.3g |
| SS10 | 2.7-2.9mm | 10 | 1440pcs (10 gross)/Bag | 20.6g |
| SS12 | 3.0-3.2mm | 10 | 1440pcs (10 gross)/Bag | 36.1g |
| SS16 | 3.8-4.0mm | 12 | 1440pcs (10 gross)/Bag | 55.8g |
| SS20 | 4.8-5.0mm | 14 | 1440pcs (10 gross)/Bag | 89.3g |
| SS30 | 6.3-6.5mm | 16 | 288pcs (2 gross)/Bag | 65.5g |
| Mixed Sizes (1000pcs) | Mixed | Varies | Approx. 1000pcs (ss4, ss6, ss8, ss10, ss12, ss16, ss20, ss30) | N/A |
| Mixed Sizes (1680pcs) | Mixed | Varies | Approx. 1680pcs (ss3, ss4, ss5, ss6, ss8, ss10) | N/A |
| Mixed Sizes (400pcs) | Mixed | Varies | Approx. 400pcs (ss4, ss6, ss8, ss10, ss12) | N/A |

Image: Packaging of mixed rhinestones, labeled CRM65.
Setup
Before applying the rhinestones, ensure you have all necessary materials and prepare your working area.
Required Materials:
- ev-rhinestones RD-11647 Clear AB Flatback Glass Rhinestones
- Appropriate adhesive (e.g., nail glue for nails, craft glue for other surfaces)
- Rhinestone applicator tool (wax pencil, tweezers, or specialized picker)
- Clean, dry surface for application
- Optional: Top coat (for nail art), small dish for holding rhinestones
Preparation:
- Clean the Surface: Ensure the application surface (e.g., nail, fabric, phone case) is clean, dry, and free of oils or dust. For nails, apply base coat and desired polish color, allowing it to dry completely.
- Organize Rhinestones: Pour a small amount of rhinestones into a shallow dish or onto a clean, flat surface for easy access.
Operating (Application)
Follow these steps for effective application of your flatback rhinestones:
- Apply Adhesive: Place a small dot of adhesive onto the exact spot where you want to place the rhinestone. Avoid applying too much glue, as it can spread and dull the rhinestone's shine.
- Pick Up Rhinestone: Use your applicator tool to gently pick up a rhinestone. A wax pencil can pick up the top, while tweezers can grasp the sides.
- Place Rhinestone: Carefully place the flat back of the rhinestone onto the adhesive dot. Gently press down to ensure good contact and secure adhesion.
- Adjust Position: If necessary, use the tip of your applicator tool or a toothpick to adjust the rhinestone's position before the adhesive dries.
- Allow to Dry: Allow the adhesive to dry completely according to the adhesive manufacturer's instructions. Drying times can vary.
- Seal (for Nail Art): For nail art, apply a thin layer of top coat over and around the rhinestones to further secure them and enhance durability. Avoid applying top coat directly over the rhinestone's facets, as this can reduce its sparkle.
Maintenance
Proper care will help maintain the sparkle and adhesion of your rhinestones.
- Cleaning: If rhinestones become dull, gently wipe them with a soft, lint-free cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, but ensure no water or cleaning solution seeps under the rhinestones, which could weaken the adhesive.
- Avoid Harsh Chemicals: Do not expose rhinestones to harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish or weaken the adhesive.
- Storage: Store unused rhinestones in their original packaging or a sealed container in a cool, dry place to prevent dust accumulation and loss.
Troubleshooting
Here are solutions to common issues you might encounter:
- Rhinestones Falling Off:
- Ensure the application surface was clean and dry before applying.
- Use a sufficient amount of appropriate adhesive.
- Allow adequate drying time for the adhesive.
- For nail art, ensure a top coat is applied correctly to seal the rhinestones.
- Rhinestones Appear Dull:
- Clean the surface of the rhinestones gently with a soft cloth.
- Ensure no adhesive residue is covering the facets of the rhinestone.
- Avoid applying top coat directly over the rhinestone's top surface if it's not specifically designed for rhinestone sealing.
Specifications
- Product Name: RD-11647 Clear AB Flatback Glass Rhinestones
- Brand: ev-rhinestones
- Material: Glass
- Shape: Round Flat Back
- Technics: Glue On, Non Hotfix
- Grade: AAA, MC
- Available Sizes: SS3, SS4, SS5, SS6, SS8, SS10, SS12, SS16, SS20, SS30, and various mixed packs.
- Quantity: Varies by size (e.g., 1440pcs for smaller sizes, 288pcs for SS30, mixed quantities for assorted packs).
- Use: Bags, Garment, Nail Art, Shoes, Cell Phone, Box, Pen, Furniture, Greeting Cards, etc.
Warranty and Support
For any questions, concerns, or support regarding your ev-rhinestones RD-11647 Clear AB Flatback Glass Rhinestones, please contact the seller or manufacturer directly through your purchase platform. Specific warranty details, if any, are typically provided at the point of purchase or by the seller.