LENOXX 11-Fin 2400W Oil Column Heater User Manual

Introduction

Thank you for purchasing the LENOXX 11-Fin 2400W Oil Column Heater. This electric oil-filled radiator is designed to provide efficient and comfortable heating for your home or office. Featuring 11 fins, 3 heat settings, an adjustable thermostat, and castor wheels for portability, this heater is equipped with essential safety features including overheating protection and a tip-over switch. Please read this manual thoroughly before operation to ensure safe and optimal performance.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.

• Read all instructions before using this heater.
• Do not use this heater in bathrooms, laundry areas, or similar indoor locations where water may be present.
• Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and keep them away from the sides and rear.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Product Components

Familiarize yourself with the parts of your LENOXX Oil Column Heater.

• Oil-filled fins (11 fins)
• Control Panel (Power switches, Thermostat dial)
• Power Indicator Light
• Castor Wheels (4)
• Carry Handle
• Cord Storage
• Power Cord and Plug

Image: Front view of the LENOXX 11-Fin Oil Column Heater, showing the fins, control panel, and castor wheels.

Image: Close-up view of the heater's control panel, featuring the power switches and adjustable thermostat dial.

Setup and Assembly

Your LENOXX Oil Column Heater comes with castor wheels for easy mobility. Follow these steps to attach them:

1. Carefully turn the heater upside down on a soft, non-abrasive surface to avoid scratching the finish.
2. Locate the two U-shaped brackets and four castor wheels in the packaging.
3. Align the U-shaped brackets with the pre-drilled holes at the bottom of the heater, near each end.
4. Insert the threaded stem of each castor wheel into the holes on the U-shaped brackets. Secure them by tightening the nuts provided (if applicable) or by pushing them firmly until they click into place.
5. Ensure all wheels are securely attached and can rotate freely.
6. Carefully turn the heater upright.

Before plugging in, ensure the heater is placed on a firm, level surface and is at least 1 meter (3 feet) away from walls, furniture, and other combustible materials.

Image: The LENOXX heater positioned in a living space, demonstrating its compact size and portability with castor wheels.

Image: Detail of the integrated cord storage on the front base of the heater, allowing for neat cable management when not in use.

Operating Instructions

Operating your LENOXX Oil Column Heater is straightforward:

Powering On and Heat Settings

1. Ensure the heater is plugged directly into a suitable wall outlet (240V AC). Do not use extension cords or power strips.
2. Turn the thermostat dial to the maximum setting (clockwise).
3. Select your desired heat setting using the power switches on the control panel:
   • Switch I (Low Heat): Activates approximately 1000W.
   • Switch II (Medium Heat): Activates approximately 1400W.
   • Switch I + II (High Heat): Activates full 2400W.
4. The power indicator light will illuminate when the heater is on.

Adjusting the Thermostat

The adjustable thermostat allows you to maintain a consistent room temperature.

1. Once the room reaches your desired temperature, slowly turn the thermostat dial counter-clockwise until you hear a "click" and the power indicator light turns off.
2. The heater will now cycle on and off automatically to maintain the set temperature.
3. To increase the temperature, turn the dial clockwise. To decrease, turn it counter-clockwise.

Safety Features

• Overheating Protection: The heater will automatically shut off if it overheats. Unplug the heater and allow it to cool down for at least 30 minutes before attempting to restart. Ensure no obstructions are blocking the air vents.
• Tip-Over Switch: The heater will automatically shut off if it is accidentally tipped over. Place the heater upright on a stable surface to resume operation.

Maintenance and Care

Regular maintenance ensures the longevity and efficient operation of your heater.

• Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
• Wipe the exterior surfaces of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
• Do not immerse the heater in water or any other liquid.
• For storage, ensure the heater is clean and dry. Wrap the power cord around the integrated cord storage. Store the heater in a cool, dry place.
• No internal maintenance is required. The oil in this heater is permanently sealed and never needs refilling.

Troubleshooting

If you experience issues with your heater, please refer to the following common problems and solutions:

Specifications

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact LENOXX customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, please visit the official LENOXX website or contact their customer support line.