1. Introduction
This manual provides essential instructions for the installation, operation, and maintenance of the Moxa EDS-2016-ML Unmanaged Ethernet Switch. The EDS-2016-ML is designed for industrial applications, offering reliable network connectivity with its 16 10/100BaseT(X) ports and robust operating temperature range.
2. Safety Information
- Ensure proper grounding to prevent electrical hazards.
- Disconnect power before cleaning or servicing the device.
- Operate the device within the specified temperature and humidity ranges.
- Do not expose the device to water or excessive moisture.
- Refer to local electrical codes for installation requirements.
3. Product Overview
The Moxa EDS-2016-ML is an unmanaged Ethernet switch featuring 16 10/100BaseT(X) ports. It is engineered for industrial environments, supporting an operating temperature range of -10 to 60°C. Its compact design and robust construction ensure reliable performance in demanding conditions.
Figure 1: Moxa EDS-2016-ML Unmanaged Ethernet Switch, showing its compact form factor and 16 Ethernet ports.
4. Setup
4.1 Physical Installation
The EDS-2016-ML is typically mounted on a DIN-rail. Ensure the mounting surface is stable and provides adequate ventilation. Leave sufficient space around the switch for heat dissipation and cable routing.
4.2 Power Connection
Connect a compatible DC power supply to the terminal block on the switch. Verify that the power supply voltage matches the switch's requirements. Ensure the power connection is secure before applying power.
4.3 Network Connection
Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to the 10/100BaseT(X) ports on the EDS-2016-ML. The switch will automatically detect the speed and duplex mode of connected devices.
5. Operating
5.1 Basic Operation
The EDS-2016-ML is an unmanaged switch, meaning it operates on a plug-and-play basis. Once powered on and connected to network devices, it will automatically forward Ethernet frames between connected ports without requiring any configuration.
5.2 LED Indicators
- PWR LED: Indicates power status. Lit when power is supplied.
- Link/Act LEDs (per port): Lit when a valid network link is established. Blinks to indicate data activity.
6. Maintenance
6.1 Cleaning
Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris to maintain proper airflow.
6.2 Environmental Considerations
Ensure the operating environment remains within the specified temperature range of -10 to 60°C and appropriate humidity levels to prevent damage and ensure optimal performance.
7. Troubleshooting
- No Power: Check the power supply connection and ensure the power source is active. Verify the PWR LED is lit.
- No Link on Port: Ensure the Ethernet cable is securely connected at both ends. Verify the connected device is powered on and functioning correctly. Try a different cable or port.
- Slow Network Connection: Check for damaged cables. Ensure connected devices are operating at their expected speeds. While unmanaged, excessive network traffic or faulty devices can impact performance.
8. Specifications
| Feature | Specification |
|---|---|
| Model | EDS-2016-ML |
| Ports | 16 x 10/100BaseT(X) Ethernet Ports |
| Switch Type | Unmanaged Ethernet Switch |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| International Protection Rating | IP54 |
| Item Weight | 6.99 Pounds |
| Manufacturer | MOXA |
| Date First Available | March 10, 2021 |
| UPC | 040048839507 |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Moxa website or contact your authorized Moxa distributor. Keep your purchase receipt for warranty claims.
