Introduction
This user manual provides comprehensive instructions for the LogiLink PA0223 10000 mAh Power Bank. It covers product features, setup, operation, maintenance, troubleshooting, and technical specifications. Please read this manual carefully before using the device to ensure safe and optimal performance.
Safety Instructions
- Do not expose the power bank to extreme temperatures, direct sunlight, or fire.
- Do not immerse the power bank in water or other liquids.
- Avoid dropping or subjecting the power bank to strong impacts.
- Do not attempt to disassemble, repair, or modify the power bank. This may void the warranty and pose safety risks.
- Keep out of reach of children.
- Use only approved chargers and cables for charging the power bank and external devices.
- If the power bank swells, emits an odor, or becomes hot during use or charging, discontinue use immediately.
Package Contents
The package should contain the following items:
- 1 x LogiLink PA0223 10000 mAh Power Bank
- 1 x 2-in-1 USB Cable (USB-A to USB-C and Micro-USB)
- 1 x User Manual
Image: LogiLink PA0223 Power Bank and its retail packaging, showing the included cable.
Product Overview
The LogiLink PA0223 is a portable power bank designed to charge mobile phones and tablets on the go. It features a compact and slim design with a 10000 mAh Li-polymer battery.
Key Features:
- Capacity: 10000 mAh (3.7V Li-polymer battery)
- Input: USB-C and Micro-USB (5V/2A, 10W max) for fast charging the power bank.
- Output: 5V/2.4A (12W max) for charging external devices.
- Dual Charging: Capable of charging two devices simultaneously.
- Integrated Cable: Includes a 2-in-1 USB-A to USB-C and Micro-USB cable.
- LED Indicator: Displays current battery status.
- Safety Protections: Built-in protection against overcurrent, overvoltage, overheating, and short circuit.
Image: Top view of the LogiLink PA0223 Power Bank, showing its textured surface and LED indicators.
Image: Diagram illustrating the power bank's protection features against overcurrent, overvoltage, overheating, and short circuit.
Setup
1. Charging the Power Bank
Before first use, fully charge the power bank. To charge the LogiLink PA0223 Power Bank:
- Connect the included 2-in-1 USB cable (USB-A end) to a USB wall adapter (not included) or a computer's USB port.
- Connect the Micro-USB or USB-C end of the 2-in-1 cable to the corresponding input port on the power bank.
- The LED indicators on the power bank will light up to show the charging progress. All LEDs will be solid when fully charged.
Image: The LogiLink PA0223 Power Bank being charged via its USB-C input port, connected to a laptop.
Image: The LogiLink PA0223 Power Bank being charged via its Micro-USB input port, connected to a laptop.
2. Checking Battery Status
Press the power button once to check the remaining battery level. The LED indicators will light up, with each LED representing approximately 25% of the charge.
- • 1 LED: 0-25% charge
- • 2 LEDs: 25-50% charge
- • 3 LEDs: 50-75% charge
- • 4 LEDs: 75-100% charge
Operating Instructions
Charging External Devices
The LogiLink PA0223 Power Bank can charge mobile phones, tablets, and other USB-powered devices.
- Connect your device's charging cable to one of the USB output ports on the power bank.
- Connect the other end of the cable to your device.
- The power bank will automatically begin charging your device. If not, press the power button once.
- You can charge up to two devices simultaneously using the available output ports.
Image: The LogiLink PA0223 Power Bank simultaneously charging two smartphones via its USB output ports.
Image: The LogiLink PA0223 Power Bank charging a smartphone, highlighting its 10000 mAh capacity.
Using the 2-in-1 Cable
The included 2-in-1 cable features both USB-C and Micro-USB connectors, allowing compatibility with a wide range of devices.
Image: A close-up view of the versatile 2-in-1 USB cable, showing its USB-A, USB-C, and Micro-USB connectors.
Maintenance
- Clean the power bank with a soft, dry cloth. Do not use liquid cleaners.
- Store the power bank in a cool, dry place away from direct sunlight and moisture.
- If the power bank will not be used for an extended period, charge it to at least 50% every three months to prolong battery life.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank does not charge. | Charging cable is faulty or not properly connected. Charger is not working. | Check cable connections. Try a different USB cable or wall adapter. Ensure the power bank's input port is clean. |
| Device does not charge from power bank. | Power bank battery is depleted. Device cable is faulty or not properly connected. Device is incompatible. | Recharge the power bank. Check cable connections. Try a different charging cable. Ensure your device is compatible with USB charging. Press the power button on the power bank. |
| Slow charging. | Low power input/output. Faulty cable. | Ensure you are using a 5V/2A (10W) or higher wall adapter to charge the power bank. Use a high-quality cable. |
| LED indicators are not working. | Power bank is off or faulty. | Press the power button to activate the LEDs. If still not working, the unit may be faulty. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | PA0223 |
| Battery Type | Lithium-Polymer |
| Battery Capacity | 10000 mAh |
| Input (Micro-USB / USB-C) | 5V / 2A (10W max) |
| Output (USB-A) | 5V / 2.4A (12W max) |
| Number of Output Ports | 2 |
| Dimensions (L x W x H) | 14 x 6.8 x 1.6 cm |
| Item Weight | 228 g |
| Color | Black |
| Included Cable | 2-in-1 USB-A to USB-C and Micro-USB (30 cm) |
| Protection Features | Overcurrent, Overvoltage, Overheating, Short Circuit |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official LogiLink website. Keep your purchase receipt as proof of purchase.
