bobble HAF00I200

Download PDF
Contents

Bobble Carbon Filter Replacement Manual

For Bobble Classic, Infuse, and Plus Bottles

Introduction

This manual provides essential instructions for the proper installation, use, and maintenance of your Bobble Replacement Carbon Filters. These filters are designed to fit Bobble Classic, Infuse, and Plus bottles, ensuring you continue to enjoy clean, fresh-tasting water.

Each filter is engineered to reduce chlorine taste and odor from tap water, offering an eco-friendly alternative to single-use plastic bottles. Please read these instructions carefully before use.

Setup and Initial Installation

Follow these steps to install a new carbon filter into your Bobble bottle:

  1. Unscrew the Cage: Carefully unscrew the filter cage from the top of your Bobble bottle.
  2. Remove Old Filter: If replacing an existing filter, remove the old filter from the cage and discard it.
  3. Insert New Filter: Place the new Bobble carbon filter into the filter cage. Ensure it is seated correctly.
  4. Screw Cage Back On: Screw the filter cage, with the new filter installed, back onto the top of your Bobble bottle until secure.
  5. Prime the Filter: Before first use, fill the bottle with water and gently squeeze a small amount through the filter to remove any carbon dust. Repeat this process a few times.
Bobble filter components, showing the green filter cage separated from the carbon filter element.

Image: Bobble filter components, illustrating the separate filter cage and carbon filter element.

Bobble bottle with filter installed and replacement filter packaging.

Image: A Bobble bottle with a filter installed, alongside the packaging for replacement filters.

Operating Instructions

Once the filter is installed and primed, your Bobble bottle is ready for use:

  • Fill with Water: Fill your Bobble bottle with tap water.
  • Drink: Sip water through the mouthpiece. The filter will purify the water as you drink, removing chlorine and improving taste.
  • Portability: The Bobble bottle with its filter is designed for on-the-go hydration, providing filtered water wherever you are.
A person holding a Bobble water bottle with a purple filter, outdoors.

Image: A Bobble water bottle with a purple filter being held by a person outdoors, demonstrating its portable use.

Maintenance and Filter Replacement

Regular filter replacement is crucial for optimal performance and water quality:

  • Replacement Schedule: Replace each filter after 2-3 months of use, or after filtering approximately 40 gallons (150 liters) of water, whichever comes first.
  • Cleaning: The bottle and filter cage can be hand-washed with warm, soapy water. Do not wash the carbon filter itself with soap.
  • Storage: If storing the bottle for an extended period, remove the filter, allow it to air dry completely, and store it in a cool, dry place.
Two Bobble replacement carbon filters.

Image: Two Bobble replacement carbon filters, ready for installation.

Troubleshooting

If you encounter issues with your Bobble filter, consider the following:

  • Slow Water Flow: This may indicate that the filter is clogged or nearing the end of its lifespan. Try priming the filter again or replace it if it's been 2-3 months since the last replacement.
  • Unusual Taste/Odor: If water still has an unusual taste or odor after filtering, ensure the filter is correctly seated and has been properly primed. If the issue persists, replace the filter.
  • Leaking: Ensure the filter cage is securely screwed onto the bottle and that the filter is correctly inserted into the cage. Check for any damage to the bottle or cage.

Specifications

FeatureDetail
MaterialCarbon
Product Dimensions (D x W x H)0.5" x 0.5" x 3"
Item Weight22.68 g
External Testing CertificationNSF
Product BenefitsFilter Replacement
Model NumberHAF00I200
Compatible WithBobble Classic, Infuse, and Plus Bottles
UPC755247200651

Warranty Information

Specific warranty details for Bobble Replacement Carbon Filters are not provided in this document. For information regarding product warranty, please refer to the original product packaging or contact Bobble customer support directly.

Customer Support

If you have any questions, concerns, or require further assistance with your Bobble Replacement Carbon Filters, please visit the official Bobble website or refer to the contact information provided on your product packaging. You may also find helpful resources and FAQs on the Bobble brand store page on Amazon: Bobble Store on Amazon.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.