1. Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
Always supervise children during play. Ensure all track pieces are securely connected before use. Do not modify the product in any way. Keep away from heat sources and open flames.
2. Product Overview
The Bburago B18-30532 GO Gears Extreme Double Vortex is a high-speed stunt car play set designed for dynamic vehicle action. This set allows users to construct a track featuring loops, high-banked curves, a ring of fire, and obstacle boxes for exciting car maneuvers.
The set includes two high-performance pull-back motor race cars capable of achieving significant scale speeds and traveling over 25 meters (82 feet) in a straight line.
Figure 2.1: The Bburago GO Gears Extreme Double Vortex race track fully assembled, showcasing its loops, curves, and stunt elements with two cars in action.
3. Package Contents
Verify that all components are present before beginning assembly. The package should contain:
- GO Gears Extreme Double Vortex Track Pieces (various components for loops, curves, obstacles, and straight sections)
- 2 x High-Performance Pull-Back Motor Race Cars
- Instruction Manual (this document)
Figure 3.1: The retail packaging for the Bburago GO Gears Extreme Double Vortex, illustrating the contents and key features.
4. Setup Instructions
The track is designed for easy assembly into various layouts. Follow these general steps:
- Unpack Components: Carefully remove all track pieces and cars from the packaging.
- Identify Track Sections: Sort the track pieces by type (straight, curved, loop supports, stunt elements).
- Connect Base Pieces: Begin by connecting the main base sections of the track. Ensure connectors click securely into place.
- Assemble Loops and Curves: Attach the loop sections and high-banked curves according to the diagrams provided on the packaging or in supplementary guides.
- Integrate Stunt Elements: Position the ring of fire and obstacle boxes within the track layout.
- Final Connections: Ensure all track pieces are firmly joined to create a continuous and stable racing surface.
- Check Stability: Once assembled, gently test the track's stability to ensure it will withstand car impacts.
Tip: For more elaborate layouts, multiple sets can be combined. Refer to the packaging for suggested configurations or unleash your creativity to design your own.
5. Operating Instructions
Using the GO Gears Extreme Double Vortex is straightforward:
- Prepare the Cars: Place a pull-back car on a flat surface.
- Wind the Motor: Pull the car backward along the surface. The internal motor will wind up. The further you pull, the more power it stores.
- Release the Car: Place the wound-up car at the starting point of the track. Release it to send it speeding through the track's various elements.
- Observe Performance: Watch as the cars navigate loops, curves, and stunts. Experiment with different pull-back distances to achieve desired speeds and stunt execution.
The cars are designed for high performance, capable of reaching scale speeds of 522 mph (840 kph) and traveling over 25 meters (82 feet) on a straight path.
6. Maintenance
To ensure the longevity and optimal performance of your Bburago GO Gears Extreme Double Vortex set, follow these maintenance guidelines:
- Cleaning: Wipe track pieces and cars with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: When not in use, disassemble the track and store it in its original box or a suitable container. The box features a handle for easy transport.
- Inspection: Periodically inspect track connectors and car wheels for any signs of wear or damage. Replace damaged components if necessary.
- Avoid Water: Keep the product away from water and excessive moisture to prevent damage to the plastic components and car mechanisms.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not move or moves slowly. | Insufficient pull-back. Debris in wheels. Damaged pull-back mechanism. | Ensure the car is pulled back fully. Check wheels for hair or dust and clean if necessary. If mechanism is damaged, car may need replacement. |
| Car derails from the track. | Track not securely connected. Car speed too high/low for a section. | Verify all track connections are firm. Adjust pull-back force to match track section requirements. |
| Track pieces do not connect properly. | Misalignment. Connector damage. | Ensure pieces are aligned correctly before pushing together. Inspect connectors for bends or breaks. |
8. Specifications
- Model Number: B18-30532
- Product Dimensions: 2.99 x 19.88 x 14.02 inches (packaged)
- Item Weight: 2.99 pounds (packaged)
- Manufacturer: May Cheong
- Recommended Age: 3 years and up
- Batteries: 1 x 9V battery required
Note: The product description highlights pull-back motor cars. The 9V battery requirement listed in specifications may refer to an optional accessory or a different product variant not detailed in the main description. Please refer to packaging for exact battery requirements for any electronic components.
9. Warranty and Support
For product support, missing parts, or warranty inquiries, please contact Bburago customer service or the retailer from whom the product was purchased. Keep your proof of purchase for warranty claims.
Manufacturer: May Cheong
Brand: Bburago
For further assistance, please visit the official Bburago website or contact their customer support channels.
