BNT 5MP POE Two-Way Audio Security Camera

1. Introduction

Thank you for choosing the BNT 5MP POE Two-Way Audio Security Camera. This camera is designed to provide high-resolution surveillance with advanced features such as two-way audio communication, motion detection, and night vision. This manual provides essential information for the proper installation, operation, and maintenance of your security camera.

An image of the BNT 5MP POE Two-Way Audio Security Camera, showing its compact design and weatherproof casing.

2. Product Features

• 5MP Ultra High Resolution: Captures video at 2560x1920 pixels, offering twice the clarity of Full HD (1920x1080P) cameras. The F=3.6MM lens provides a wide field of view with sharp image quality.
• Two-Way Audio Communication: Equipped with a built-in microphone and speaker, enabling real-time two-way conversations via the dedicated smartphone application (Android/iPhone). This feature allows communication with family, visitors, or to deter intruders.
• IP67 Waterproof & Night Vision: Designed with IP67 international standard waterproofing, ensuring reliable operation both indoors and outdoors. The IR-CUT night vision function automatically switches between day and night modes, providing clear visibility up to 30 meters in complete darkness.
• POE Power Supply: Utilizes Power over Ethernet (POE) technology, allowing both power and data transmission through a single Ethernet cable, simplifying installation.
• Motion Detection Recording: Features motion sensor technology for automatic recording upon detecting movement, enhancing security monitoring.

3. Setup

1. Unpack the Camera: Carefully remove all components from the packaging.
2. LAN Cable Connection: Connect the camera to a POE-enabled network switch or NVR using an Ethernet (LAN) cable. Note: A LAN cable is not included with single camera units.
3. Power On: Ensure the POE switch/NVR is powered on. The camera will receive power through the Ethernet cable.
4. HDD Formatting (if applicable): If connecting to an NVR with a hard disk drive (HDD), it is crucial to format the HDD before connecting the camera. Formatting the HDD after the camera is connected may not be possible.
5. App Installation: Download and install the dedicated mobile application (e.g., "eseecloud" or similar, as specified by the manufacturer) on your Android or iPhone device for remote monitoring and control.
6. System Compatibility: Please note that due to system updates, this camera is not compatible with 5-megapixel camera sets purchased before December 2020.

4. Operating Instructions

• Remote Monitoring: Access live camera feeds and recorded footage from your smartphone or PC using the installed application.
• Two-Way Audio: Use the microphone and speaker functions within the app to communicate with individuals near the camera.
• Night Vision Mode: The camera automatically switches to IR-CUT night vision mode in low-light conditions.
• Motion Detection: Configure motion detection zones and sensitivity settings through the app to receive alerts and initiate recording when movement is detected.
• Recording Playback: Review recorded video clips stored on your NVR or cloud storage via the mobile application.

5. Maintenance

• Cleaning: Regularly clean the camera lens with a soft, dry cloth to ensure clear image quality. Avoid using harsh chemicals.
• Cable Inspection: Periodically check all cable connections for wear, damage, or loose fittings, especially for outdoor installations.
• Software Updates: Keep the camera firmware and mobile application updated to ensure optimal performance and access to the latest features and security patches.
• Environmental Considerations: While IP67 rated, avoid directing high-pressure water jets directly at the camera. Ensure proper drainage around the installation area.

6. Troubleshooting

• No Image/Connection:
  • Ensure the POE switch/NVR is powered on and functioning correctly.
  • Check the Ethernet cable connection at both ends.
  • Verify that the camera is compatible with your existing system (especially if purchased before December 2020).
• Poor Image Quality on Remote Monitoring:
  • Image quality may be reduced during remote viewing via smartphone/PC for bandwidth efficiency. This is normal.
  • Ensure a stable internet connection for both the camera system and your viewing device.
• Microphone Picks Up Excessive Ambient Noise:
  • The built-in microphone is highly sensitive. Consider adjusting the microphone sensitivity settings in the app if available, or repositioning the camera to minimize unwanted background noise.
• Speaker Sound is Muffled or Low:
  • The speaker output may be low or muffled. When using two-way audio, speak slowly and clearly, pausing between phrases, to ensure your message is understood.
• Night Vision Issues:
  • In areas with streetlights or other ambient light, switching the night vision mode to color (if supported by the app, e.g., eseecloud) may provide a clearer image than infrared black and white.
  • Note that even in color night vision mode, the infrared illuminators may still emit light, potentially revealing the camera's location.
• Recording Not Working:
  • Ensure the HDD in your NVR is properly formatted (refer to Setup section).
  • Check recording schedules and motion detection settings in the app.

7. Specifications

8. Warranty and Support

For any questions or concerns regarding your BNT 5MP POE Two-Way Audio Security Camera, please do not hesitate to contact our support team. We are here to assist you with setup, operation, or any technical issues you may encounter.

Contact Information:

• Email: admin@bnt-store.com
• LINE: bnt-mina

Please retain your purchase receipt for warranty purposes.