Important Safety Information
Please read all instructions carefully before using this appliance. Keep this manual for future reference.
- This appliance is designed for shaving facial hair. Do not use it for any other purpose.
- Keep the charging cable away from heated surfaces.
- Do not immerse the charging adapter in water or other liquids.
- Ensure your hands are dry when plugging or unplugging the charger.
- This shaver is waterproof (IPX7 rated) and can be rinsed under water. However, do not charge the shaver in wet conditions.
- Do not open the appliance housing. Repairs should only be performed by authorized service personnel.
- Keep out of reach of children.
Product Overview
The FLYCO FS302US Electric Shaver is designed for a comfortable and efficient shaving experience. It features a 3D floating shaving system and dual-track foil for close contact with facial contours.
Key Features
- 3D Floating Shaving Heads: Adapts to face, neck, and jaw contours.
- Dual-Track Foil: Enhances shaving efficiency.
- Precision Self-Sharpening Blades: Ensures effective hair cutting.
- Wet and Dry Use: Suitable for dry shaving or wet shaving with foam/gel.
- IPX7 Waterproof: Fully washable for easy cleaning.
- Pop-Up Trimmer: For detailing sideburns, beard, and mustache.
- USB Rechargeable: Convenient charging via various USB devices.
- LED Display: Indicates charging status.
- Cordless Operation: Provides freedom of movement during shaving.
Figure 1: Overview of the FLYCO Electric Shaver FS302US with its main features.
Figure 2: Detailed view of the 3D Floating Shaving Head components.
Setup
Charging the Shaver
- Ensure the shaver is turned off.
- Connect the USB charging cable to the shaver's charging port.
- Plug the other end of the USB cable into a compatible USB power source (e.g., computer, power bank, car charging port, or a USB wall adapter).
- The LED display will indicate the charging status. A full charge provides approximately 45 minutes of shaving time.
- Disconnect the shaver from the charger once fully charged or when not charging.
Note: Do not use the shaver while it is charging.
Figure 3: Connecting the shaver for USB charging.
Operating Instructions
Dry Shaving
- Ensure your face is clean and dry.
- Press the power button to turn on the shaver.
- Gently move the shaver in small circular motions over your face and neck.
- Stretch your skin with your free hand to ensure a closer shave.
- After shaving, press the power button to turn off the shaver.
Wet Shaving
- Apply shaving foam or gel to your face.
- Press the power button to turn on the shaver.
- Shave in small circular motions, allowing the shaver to glide smoothly over the foam/gel.
- Rinse the shaver head under running water during shaving to prevent clogging.
- After shaving, rinse your face and the shaver thoroughly.
Figure 4: Demonstrating wet shaving with foam.
Using the Pop-Up Trimmer
- Locate the pop-up trimmer switch on the back of the shaver.
- Slide the switch upwards to activate the trimmer.
- Use the trimmer to shape sideburns, mustaches, or trim longer beard hair before shaving.
- After use, slide the switch downwards to retract the trimmer.
Figure 5: Using the integrated pop-up trimmer.
Figure 6: Cordless operation for convenient shaving.
Maintenance
Cleaning the Shaver
Regular cleaning ensures optimal performance and hygiene.
- Turn off the shaver and disconnect it from any power source.
- Press the release button to open the shaver head assembly.
- Rinse the shaver head and the internal hair chamber thoroughly under running tap water.
- Shake off excess water and allow the shaver head to air dry completely before closing it.
- For a more thorough cleaning, you may use the included cleaning brush to remove stubborn hair particles.
Figure 7: The shaver is fully washable under running water.
Replacing Shaving Heads
For continued optimal shaving performance, it is recommended to replace the shaving heads periodically, typically every 12-18 months, depending on usage. Replacement heads can be purchased from authorized retailers.
- Turn off the shaver and disconnect it from any power source.
- Open the shaver head assembly.
- Carefully remove the old shaving heads.
- Insert the new shaving heads, ensuring they are correctly aligned.
- Close the shaver head assembly until it clicks into place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is depleted. | Charge the shaver for at least 45 minutes. |
| Poor shaving performance. | Shaver heads are dirty or worn. | Clean the shaver heads thoroughly. Consider replacing the shaving heads if they are old. |
| Shaver is not charging. | Charging cable or adapter is faulty; poor connection. | Check the USB cable and adapter. Ensure the cable is securely connected to both the shaver and the power source. Try a different USB port or adapter. |
| Excessive noise during operation. | Shaver head assembly is not properly closed or dirty. | Ensure the shaver head assembly is securely closed. Clean the shaver heads. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | FS302US |
| Power Source | Battery Powered (USB Rechargeable) |
| Battery Average Life | 45 minutes |
| Head Type | Rotary, 3D Floating |
| Number of Blades | 3 |
| Blade Material | Stainless Steel |
| Waterproof Rating | IPX7 (Whole Body Washable) |
| Included Components | Shaver, USB Charging Cable, Cleaning Brush (may vary) |
| Product Dimensions | 7.28 x 5.31 x 2.87 inches |
| Weight | 14.39 ounces |
Warranty and Support
This FLYCO Electric Shaver FS302US comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact FLYCO customer service through the contact information provided on the product packaging or the official FLYCO website.