Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Original VELUX Roof Window Pleated Blind. Designed for VELUX roof windows, this pleated blind offers privacy and regulates natural light, creating a pleasant atmosphere in your living space. Please read these instructions carefully before proceeding with installation or use to ensure proper function and longevity of your product.
The VELUX pleated blind is specifically designed for VELUX roof windows with product codes: GGL M06, GGU M06, GHL M06, GHU M06, GPL M06, GPU M06, VEA M35, VEB M35, VEC M35. Ensure your window model matches these specifications for optimal fit and performance.
Product Overview
The VELUX pleated blind is a non-blackout blind that softens incoming daylight while providing privacy. It is made from high-quality, durable translucent polyester fabric with invisible and robust polyester cords. The design allows for manual operation with a control bar, enabling the blind to be positioned at any point on the window, as it is not fixed at the top or bottom.
Figure 1: VELUX Pleated Blind in Light Beige, installed in a wooden roof window frame. The blind is partially open, demonstrating its flexible positioning.
Figure 2: A woman manually adjusting the VELUX pleated blind in a bright room with a roof window. The blind's control bar allows for easy movement up and down the window.
Setup and Installation
The VELUX pleated blind is designed for easy installation within minutes, thanks to its pre-assembled mounting system. No special tools are typically required beyond a screwdriver for securing the side rails.
1. Identifying Your VELUX Roof Window
Before installation, it is crucial to identify the correct code for your VELUX roof window. This code ensures you have the correct size pleated blind for a perfect fit.
- The window code is typically located on a small metal plate or sticker on the top left or right side of the opened VELUX roof window frame.
- Depending on the model, the exact location and appearance of the plate may vary.
- Verify the window type and size code carefully to ensure compatibility.
Figure 3: Diagram illustrating the process of finding the VELUX window code. Step 1 shows opening the window, Step 2 shows looking for the code plate, and Step 3 shows a table of VELUX size codes and compatible products.
2. Pre-Installation Check
- Unpack the pleated blind and check all components against the packing list.
- Ensure the mounting brackets are pre-mounted in your window. If not, you may need to acquire the Z0Z 230 mounting brackets separately.
3. Installation Steps
- Align the top cassette of the pleated blind with the pre-mounted brackets at the top of your VELUX roof window.
- Click or slide the cassette into place, ensuring it is securely fastened.
- Extend the side rails downwards and align them with the pre-drilled holes or designated areas on the window frame.
- Secure the side rails using the provided screws. Do not overtighten.
- Test the blind's operation by gently pulling the control bar up and down to ensure smooth movement along the side rails.
For detailed visual instructions, refer to the installation guide included in your product packaging or visit the official VELUX support website.
Operating the Pleated Blind
The VELUX pleated blind features manual operation via a control bar. This design allows for flexible positioning to control light and privacy.
- To open or close the blind, gently grasp the control bar located at the bottom of the blind.
- Slide the control bar upwards to open the blind or downwards to close it.
- The blind can be positioned at any desired point along the window, as it is not fixed at the top or bottom. This allows for precise light control.
- For windows that are out of reach, an extension rod (sold separately) can be used to operate the control bar.
Figure 4: A woman demonstrating the manual operation of the VELUX pleated blind by sliding the control bar. The blind can be adjusted to any position on the window.
Care and Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your VELUX pleated blind.
Cleaning Instructions:
- Dusting: Regularly dust the fabric with a soft brush or vacuum cleaner with a brush attachment on low suction.
- Spot Cleaning: For minor stains, gently blot the affected area with a damp cloth using lukewarm water and a mild detergent. Do not rub vigorously.
- Avoid Harsh Chemicals: Do not use strong detergents, solvents, or abrasive cleaners, as these can damage the fabric and components.
- Drying: Allow the blind to air dry completely before retracting it.
General Maintenance:
- Inspect the cords and side rails periodically for any signs of wear or damage.
- Ensure the side rails are free from obstructions that could impede the blind's movement.
- Do not force the blind if it encounters resistance during operation.
Troubleshooting
If you encounter issues with your VELUX pleated blind, refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blind does not move smoothly. | Obstruction in side rails; dirty side rails; misaligned side rails. | Check for and remove any obstructions. Clean the side rails. Ensure side rails are securely and correctly installed. |
| Blind sags or does not hold position. | Tension issue with cords; worn components. | This may indicate an internal mechanism issue. Contact VELUX support for assistance. Do not attempt to repair internal cord mechanisms yourself. |
| Blind is difficult to operate. | Friction in side rails; damaged control bar. | Ensure side rails are clean. Check control bar for damage. |
If the problem persists after attempting these solutions, please contact VELUX customer support for further assistance.
Specifications
- Model Number: FHL M06 1283S
- Product Dimensions: 93.9 x 60.3 x 1 cm (L x W x H)
- Weight: 800 g
- Size (Current Product): B60 x H94 cm
- Color (Current Product): Light Beige
- Material: 100% Polyester fabric, Aluminum side rails
- Opacity: Light filtering (non-blackout)
- Operation Mode: Manual (with control bar)
- Recommended Use: Indoor, for VELUX roof windows
- Compatible VELUX Window Codes: GGL M06, GGU M06, GHL M06, GHU M06, GPL M06, GPU M06, VEA M35, VEB M35, VEC M35
- Special Features: Light filtering, stepless positioning
- Included Components: Partially assembled blind
Warranty and Support
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official VELUX website. VELUX products are known for their high quality and durability, and are backed by comprehensive support.
Customer Support:
If you require further assistance, have questions about installation, or need to report a defect, please contact VELUX customer support. You can find contact details on the official VELUX website or through your local VELUX dealer.
Official VELUX Website: www.velux.com
For specific product information or to purchase accessories like extension rods or mounting brackets (Z0Z 230), please visit the VELUX Store on Amazon.
