Antar AT51009 Aluminum Shower Stool User Manual

1. Important Safety Information

Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Maximum User Weight: Do not exceed the maximum weight capacity of 100 kg (220 lbs).
• Stability: Ensure all legs are evenly adjusted and the stool is stable on a flat, non-slip surface before use.
• Inspection: Regularly inspect the stool for any signs of wear, damage, or loose components. Do not use if damaged.
• Assembly: Ensure all screws are securely tightened during assembly.
• Cleaning: Clean with mild soap and water. Avoid abrasive cleaners that may damage the surface.
• Children: Keep out of reach of children when not in use. This product is not a toy.

2. Product Overview

The Antar AT51009 Aluminum Shower Stool is designed to provide a safe and comfortable seating solution for individuals requiring assistance during bathing or showering. Its lightweight aluminum frame and adjustable height feature make it versatile and easy to use.

Components

• Contoured Plastic Seat with Anti-slip Surface
• Aluminum Leg Frames (4)
• Height Adjustment Pins (4)
• Non-slip Rubber Feet (4)
• Assembly Screws and Washers

This image displays the Antar AT51009 shower stool, highlighting its anti-slip seat surface for user safety and its height-adjustable legs, allowing customization for optimal comfort and accessibility.

3. Setup and Assembly

Unpacking

Carefully remove all components from the packaging. Verify that all listed components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

Assembly Instructions

Assembly is straightforward and typically takes about 5 minutes. No special tools are required.

1. Identify the plastic seat and the four aluminum leg frames. The leg frames are typically numbered (e.g., 1 and 2) and correspond to specific channels on the underside of the seat.
2. Insert Leg Frame 2 into its designated channel on the underside of the seat.
3. Insert Leg Frame 1 into its designated channel.
4. Align the holes in the leg frames with the holes in the seat.
5. Place a washer onto each of the 5 screws, then insert the screws through the aligned holes.
6. Hand-tighten all screws initially. Gradually tighten all screws securely, ensuring the leg tubes are firmly attached to the plastic seat without over-tightening.
7. Ensure all four non-slip rubber feet are securely attached to the bottom of each leg.

A clear view of the Antar AT51009 Aluminum Shower Stool after assembly, showing its sturdy aluminum frame and contoured plastic seat.

4. Operation

Height Adjustment

The Antar AT51009 shower stool features adjustable legs to customize the seat height for optimal user comfort and accessibility. The height can be adjusted from approximately 37 cm (14.5 inches) to 49 cm (19.3 inches).

1. Ensure the stool is not in use and is placed on a stable surface.
2. Locate the spring-loaded push-pins on each leg.
3. Press the push-pin on one leg and slide the inner leg tube up or down to the desired height setting. Ensure the pin fully engages into one of the adjustment holes.
4. Repeat this process for all four legs, ensuring they are all set to the same height to maintain stability.
5. Before use, gently test the stool's stability by applying downward pressure to ensure all legs are locked at the same height and the stool does not wobble.

This image provides a detailed view of the shower stool's leg, illustrating the push-pin mechanism used for adjusting the seat height.

5. Care and Maintenance

Cleaning Instructions

• Clean the shower stool regularly with a soft cloth, mild soap, and warm water.
• Rinse thoroughly to remove all soap residue.
• Dry completely after cleaning to prevent water spots and maintain hygiene.
• Do not use abrasive cleaners, scouring pads, or solvents, as these can damage the plastic seat or aluminum frame.

Inspection

• Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Inspect the rubber feet for wear or damage. Replace worn feet to ensure continued slip resistance.
• Examine the plastic seat for cracks or significant wear.
• Check the aluminum frame for any bends, dents, or corrosion.
• If any part is compromised, discontinue use immediately and seek replacement parts or professional advice.

6. Troubleshooting

7. Specifications

8. Warranty and Support

Warranty Information

Antar products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Antar website. Keep your proof of purchase for warranty claims.

Customer Support

If you have any questions, require assistance with assembly, or need troubleshooting support, please contact Antar customer service. Contact details can typically be found on the product packaging or the official Antar website.

Please note: This manual is for informational purposes only and may be subject to change without prior notice. Always refer to the latest version available from the manufacturer.