Teamson Home PT-SF0003
Contents
Teamson Home Solar Powered Water Feature
Instruction Manual - 4 Tier Bowls Model
Important Safety Information
Please read this manual carefully before assembly and operation. Keep these instructions for future reference.
- Ensure the solar panel is placed in direct sunlight for optimal performance.
- Do not operate the pump without water. This can cause damage to the pump.
- Keep children and pets away from the water feature during operation.
- Disconnect power (turn off the switch) before cleaning or performing any maintenance.
- Protect the water feature from freezing temperatures during winter months to prevent damage to the resin and pump.
- Use only clean water in the fountain.
Product Overview
The Teamson Home Solar Powered Water Feature is a decorative outdoor fountain designed to provide a soothing water flow and ambient LED lighting. It operates using solar energy with a rechargeable battery backup for continuous use.

Image: The Teamson Home 4 Tier Bowls Solar Water Feature, showcasing its multi-tiered design and the detached solar panel.
Included Components:
- 1 x 4-Tier Water Feature Unit (Resin)
- 1 x Solar Panel (3.2W, IP64 waterproof)
- 1 x Water Pump (Flow Rate 160 L/H, 1.5-2.5W, 7.4V DC)
- Built-in LED Lights
- Rechargeable Lithium Battery (7.4V/2000mA)
- Connection Cable (2M length)
- Instruction Manual
Setup and Assembly
Assembly of this water feature is designed to be straightforward and can typically be completed in less than 5 minutes.
- Unpack Components: Carefully remove all parts from the packaging and ensure all included components are present.
- Position the Fountain: Place the main water feature unit on a stable, level surface in your desired outdoor or indoor location. Ensure it is close enough to an area that receives direct sunlight for the solar panel.
- Connect the Pump: Locate the water pump and connect it to the tubing inside the water feature. Ensure the pump is fully submerged in the lowest basin once water is added.
- Connect Solar Panel: Connect the cable from the water feature unit to the solar panel. Ensure the connection is secure.
- Position Solar Panel: Place the solar panel in an area that receives maximum direct sunlight throughout the day. Avoid shaded areas.
- Initial Charging: Before first use, ensure the switch on the solar panel is turned to the "ON" position. Allow the solar panel to charge the battery for 2-3 days in direct sunlight. This initial charge is crucial for optimal performance.
- Fill with Water: Fill the lowest basin of the water feature with clean water. Ensure the water level is sufficient to completely submerge the pump. The water capacity is approximately 8 Litres.

Image: The water feature positioned in a garden, demonstrating ideal placement for the solar panel to receive sunlight.
Operating Instructions
Once assembled and initially charged, your water feature is ready for operation.
- Power On: Ensure the switch on the solar panel is in the "ON" position. The pump will begin to circulate water and the LED lights will illuminate when sufficient power is available.
- Solar Operation: The fountain will operate during daylight hours when the solar panel receives direct sunlight. Excess energy will be stored in the rechargeable battery.
- Battery Backup: The built-in lithium battery provides power for operation during cloudy days or at night, allowing for continuous enjoyment.
- Water Level: Regularly check the water level in the fountain. Due to evaporation, water levels will decrease over time. Refill as necessary to ensure the pump remains fully submerged.
- LED Lights: The LED lights are integrated and will automatically turn on when the ambient light levels drop, powered by the stored battery energy.

Image: The water feature in operation, with water flowing between the tiers and the solar panel visible nearby.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your water feature.
- Water Replacement: Periodically drain and refill the fountain with fresh, clean water to prevent algae buildup and maintain water clarity. The frequency depends on environmental conditions.
- Cleaning the Fountain: Clean the exterior of the fountain with a soft cloth and mild soap solution. Rinse thoroughly. For stubborn mineral deposits or algae inside the basins, use a non-abrasive brush.
- Pump Cleaning: Disconnect the pump from the power source. Remove the pump from the water feature and disassemble it according to its specific instructions (usually involves removing the cover and impeller). Clean any debris, scale, or algae from the pump and impeller. Rinse thoroughly before reassembling and placing back into the fountain.
- Solar Panel Cleaning: Wipe the surface of the solar panel regularly with a damp cloth to remove dust, dirt, or leaves that may obstruct sunlight and reduce charging efficiency.
- Winterization: In areas with freezing temperatures, it is recommended to drain all water from the fountain, disconnect the pump and solar panel, and store the entire unit indoors in a dry, frost-free location during winter months. This prevents damage from ice expansion.
Troubleshooting
If you encounter issues with your water feature, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not working / Pump not running |
|
|
| LED lights not illuminating |
|
|
| Weak water flow |
|
|
Specifications
| Model Number | PT-SF0003 |
| Dimensions (L x W x H) | 43.2 cm x 30.5 cm x 68.6 cm (17" x 12" x 27") |
| Weight | 8.3 kg (approx. 18.3 lbs) |
| Material | Polyresin |
| Water Capacity | 8 Litres |
| Power Source | Solar Power, Battery (Rechargeable Lithium Battery 7.4V/2000mA) |
| Solar Panel | 3.2W, IP64 waterproof |
| Water Pump Flow Rate | 160 L/H |
| LED Lights | Built-in |

Image: Dimensional diagram of the water feature, indicating its length, width, and height.
Warranty and Support
This Teamson Home product comes with a 12-month warranty from the date of purchase, covering manufacturing defects.
For warranty claims, technical support, or any questions regarding your water feature, please contact Teamson Home customer service. Refer to your purchase documentation or the Teamson Home website for specific contact details.
Please note: Damage caused by improper assembly, lack of maintenance, freezing temperatures, or misuse is not covered under warranty.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.