1. Safety Information
Read all instructions carefully before installing or using this product. Failure to do so may result in electric shock, fire, or other hazards that could cause injury or death.
- WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- WARNING: Risk of Fire. Use only with 120V AC, 60Hz circuits.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are made correctly and securely.
- Do not alter or modify the fixture.
- Suitable for wet locations.
- IC Rated: Suitable for direct contact with insulation.
2. Product Overview
The Juno 6-Inch Round Wafer LED Downlight is an ultra-thin, canless recessed lighting solution designed for easy installation in various settings. This fixture eliminates the need for traditional recessed housings, making it ideal for shallow plenum areas and remodel projects.
Image: Juno 6-Inch Round Wafer LED Downlight and its remote driver box.
Key Features:
- Canless Design: No traditional recessed housing required, simplifying installation.
- 5-in-1 Switchable White Color Temperature: Select from 2700K (Soft White), 3000K (Warm White), 3500K (Neutral), 4000K (Cool White), or 5000K (Daylight) to match your desired ambiance.
- Dimmable: Compatible with triac dimmers, allowing dimming down to 10%.
- Wet Location Rated: Suitable for use in bathrooms, showers, and covered outdoor spaces.
- IC Rated: Fixture and driver box can be installed in direct contact with insulation.
- Energy Efficient: ENERGY STAR certified, providing reliable and energy-saving illumination.
- Matte Black Trim: Provides a clean, modern aesthetic.
3. Package Contents
Verify that all components are present before beginning installation:
- Juno 6-Inch Round Wafer LED Downlight
- Remote Driver Box
- Mounting Hardware (e.g., wire nuts)
- Installation Template
4. Specifications
Image: Product dimensions for the 6-inch wafer downlight and driver box.
| Feature | Detail |
|---|---|
| Model Number | WF6 SWW5 90CRI MB M6 |
| Brand | Juno |
| Color | Matte Black |
| Material | Aluminum |
| Light Fixture Form | Recessed Wafer Downlight |
| Voltage | 120 Volts |
| Wattage | 13 watts |
| Brightness | 970 Lumens |
| Color Temperature | 2700K, 3000K, 3500K, 4000K, 5000K (Switchable) |
| Dimming | Triac Dimming (down to 10%) |
| Rated Life | 50,000 hours |
| Dimensions (Fixture) | 7" Diameter x 1.2" H |
| Certifications | ENERGY STAR, CSA, Air-Loc, IC Rated |
| Indoor/Outdoor Usage | Indoor, Outdoor (Wet Location Rated) |
5. Installation
Follow these steps for proper installation of your Juno Wafer LED Downlight. Always ensure power is disconnected at the circuit breaker before starting any electrical work.
Installation Video Guide:
Video: Detailed installation guide for the Juno Wafer LED Downlight. This video demonstrates the process from cutting the hole to final fixture placement.
Step-by-Step Instructions:
- Prepare the Ceiling:
To cut a new hole, use the provided hole template. Place the template over the desired location on the ceiling. Trace the outer ring with a pen or pencil. Cut the opening with a 6-1/4 inch hole saw. Ensure there are no obstructions (e.g., joists, pipes) in the ceiling space.
- Access Wiring:
Open the cover of the remote driver box. Remove one of the knockouts on the side plate to feed the supply wire through. Locate the power supply leads from the remote driver box.
Image: Remote driver box showing the knockout and internal wiring.
- Make Electrical Connections:
Connect the supply wires to the corresponding wires in the remote driver box using the provided wire nuts (or other approved connectors). Typically, this involves connecting the black wire to the live wire, the white wire to the neutral wire, and the bare copper wire to the ground wire. Close the cover of the driver box after properly securing the supply wire.
- Connect Fixture to Driver Box:
Connect the male connector from the downlight fixture to the female connector from the remote driver box. Once connected, tighten the outer nut connector by hand to secure the connection of the thread lock.
Image: The downlight fixture connected to the remote driver box via a cable.
- Select Color Temperature (Pre-Installation):
Before placing the fixture into the ceiling, use the manual switch on the remote driver box to select your desired light color temperature. Options include 2700K, 3000K, 3500K, 4000K, and 5000K.
Image: The switch on the driver box used to select the color temperature.
- Insert Fixture into Ceiling:
Pull the spring clips on the fixture upwards and through the ceiling hole. Carefully push the module into the hole, ensuring the spring clips hold securely against the ceiling surface. The remote driver box should be placed in the ceiling cavity.
Image: The downlight with its spring clips extended, ready for insertion into the ceiling.
- Restore Power:
Once the fixture is securely installed, restore power at the circuit breaker. The light should now turn on.
6. Operation
Color Temperature Selection:
The Juno Wafer LED Downlight features a 5-in-1 switchable white color temperature. This switch is located on the remote driver box and must be set before final installation into the ceiling. The available color temperatures are:
- 2700K: Soft White (Warm, inviting light)
- 3000K: Warm White (Slightly less yellow than 2700K)
- 3500K: Neutral White (Balanced, natural light)
- 4000K: Cool White (Brighter, more energetic light)
- 5000K: Daylight (Very bright, bluish-white light)
Image: A visual comparison of the five selectable color temperatures in a kitchen environment.
Dimming Function:
This downlight is compatible with most standard triac dimmers, allowing you to adjust the light output from 100% down to 10%. Ensure your dimmer switch is compatible with LED fixtures for optimal performance.
7. Maintenance
The Juno Wafer LED Downlight requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.
- Bulb Replacement: The LED light source is integrated and not user-replaceable. The fixture has a rated life of 50,000 hours.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
8. Troubleshooting
If your Juno Wafer LED Downlight is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture | Check circuit breaker. Ensure all wiring connections are secure. |
| Light flickers or dims inconsistently | Incompatible dimmer switch or loose connection | Ensure dimmer is LED compatible. Check wiring connections. |
| Incorrect color temperature | Color temperature switch set incorrectly | Disconnect power, remove fixture, and adjust the CCT switch on the driver box. |
| Light output is too low/high | Dimmer setting or incorrect CCT | Adjust dimmer. Verify CCT setting is as desired. |
If troubleshooting steps do not resolve the issue, contact customer support or a qualified electrician.
9. Warranty & Support
This Juno Wafer LED Downlight is backed by a 3-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service.
What is Covered:
- Defects in materials and workmanship.
What is Not Covered:
- Damage caused by improper installation, misuse, abuse, or accidents.
- Damage from unauthorized repairs or modifications.
- Normal wear and tear.
For warranty claims or technical support, please contact Juno customer service. Keep your proof of purchase for warranty validation.
