Teamson Home PT-SF0002
Teamson Home Solar Powered Water Feature
Instruction Manual
Model: PT-SF0002
Introduction
Thank you for purchasing the Teamson Home Solar Powered Water Feature. This elegant 3-tier grey waterfall fountain is designed to bring a calming ambiance to your indoor or outdoor space with its soothing water flow and warm LED lights. It operates on solar power with a battery backup, offering an eco-friendly and energy-efficient solution.
Please read this manual thoroughly before assembly and operation to ensure safe and proper use of your water feature.
Safety Information
- Always disconnect the power source (solar panel) before performing any maintenance or cleaning.
- Ensure the pump is fully submerged in water before operation to prevent damage.
- Do not operate the fountain if any part is damaged. Contact customer support.
- Keep children and pets away from the fountain during operation.
- Place the fountain on a stable, level surface to prevent tipping.
- Protect the solar panel and pump from extreme weather conditions, especially freezing temperatures.
Package Contents
Please check that all components are present and undamaged:
- 1 x Water Fountain Unit (Grey Waterfall design)
- 1 x Solar Panel (3.2W, IP64 waterproof)
- 1 x Water Pump (Flow Rate 160 L/H, Operation Voltage: 7.4V DC)
- Built-in LED Lights
- Rechargeable Lithium Battery Backup (7.4V/2000mA)
- Connecting Cable (2M length)
- 300g Pebbles
- Instruction Manual
Figure 1: Included Components Diagram
This image illustrates the main components included with your Teamson Home Solar Powered Water Feature, ensuring you have everything needed for assembly and operation.
Setup and Assembly
Assembly is straightforward and typically takes less than 5 minutes.
- Unpack Components: Carefully remove all parts from the packaging.
-
Position the Fountain: Place the main fountain unit on a stable, level surface in your desired location. Ensure it is close enough to an area where the solar panel can receive direct sunlight.
Figure 2: Fountain positioned in a garden
The water feature is shown in a natural garden environment, demonstrating its aesthetic appeal and suitable placement.
- Connect the Pump: Locate the water pump and connect its tubing to the water outlet inside the fountain. Ensure a secure connection.
-
Place the Solar Panel: Position the solar panel in an area that receives maximum direct sunlight throughout the day. The 2-meter cable allows for flexible placement.
Figure 3: Solar panel connection
This image highlights the solar panel and its connection to the main fountain unit, illustrating how it powers the feature.
- Initial Charging: Before first use, ensure the switch on the solar panel is turned to the "ON" position. Allow the solar panel to charge for 2-3 days in direct sunlight to fully charge the internal battery. This is crucial for optimal performance, especially for the LED lights and continuous operation.
- Fill with Water: Fill the fountain with clean water. The water capacity is 9 litres. Ensure the pump is fully submerged.
- Add Pebbles: Distribute the included 300g pebbles into the base of the fountain. This adds to the aesthetic and helps stabilize the water flow.
Operating Instructions
- Power On/Off: The fountain is controlled by a switch on the solar panel. Ensure it is in the "ON" position for operation and charging.
- Solar Operation: The fountain will operate automatically when the solar panel receives sufficient direct sunlight. Excess energy will be stored in the rechargeable lithium battery.
- Battery Backup: The built-in battery allows the fountain to operate during cloudy periods or after sunset, providing continuous enjoyment.
-
LED Lights: The integrated LED lights will automatically illuminate when it gets dark, powered by the stored battery energy, creating a beautiful evening display.
Figure 4: Illuminated water flow
This detailed view captures the gentle flow of water and the warm glow of the LED lights, showcasing the fountain's nighttime appeal.
- Water Flow Adjustment: The water pump may have adjustable settings for water flow. Refer to the pump's specific instructions if available, or adjust the water level slightly to influence flow.
Product in Operation
Video 1: Solar Power Water Fountain Feature with Lights
This video demonstrates the Teamson Home Solar Powered Water Feature in operation, showcasing the continuous water flow and the effect of the integrated LED lights.
Maintenance
- Water Level: Regularly check the water level and refill as needed. Evaporation will reduce the water level, and operating the pump without sufficient water can cause damage.
- Cleaning the Fountain: Clean the fountain periodically to prevent algae buildup and mineral deposits. Use a soft brush and mild soap if necessary. Rinse thoroughly with clean water.
- Cleaning the Pump: The pump should be cleaned regularly to ensure optimal performance. Disconnect the pump, remove any debris from the intake, and clean the impeller. Refer to the pump's specific instructions for detailed cleaning.
- Solar Panel: Keep the solar panel clean and free of dust, dirt, or obstructions to ensure maximum sunlight absorption. Wipe it with a damp cloth as needed.
- Winterization: During freezing temperatures, drain all water from the fountain and store it indoors in a dry, frost-free location. This prevents damage to the pump and fountain material from ice expansion.
- Durability: The fountain is made with Polyresin, designed to be low maintenance, weather-resistant, UV, and frost protected for longevity. However, proper winterization is still recommended in harsh climates.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not operating / Low water flow |
|
|
| LED lights not working |
|
|
| Water splashing excessively |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | PT-SF0002 |
| Dimensions (L x W x H) | 34 cm x 22.9 cm x 76.2 cm (13.4" x 9" x 30") |
| Weight | 6 Kilograms |
| Material | Polyresin (38%), Stone powder (38%), Fiber (1.15%), Plastic |
| Water Capacity | 9 Litres |
| Solar Panel | 3.2W, IP64 waterproof |
| Battery | 7.4V/2000mA Lithium Battery |
| Pump Flow Rate | 160 L/H |
| Pump Operation Voltage | 7.4V DC |
| Special Features | Lighted, Weather Resistant |
| Assembly Required | Yes |
Figure 5: Product Dimensions
This image provides a visual representation of the fountain's dimensions, aiding in planning its placement.
Warranty and Support
Warranty: This product comes with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, neglect, or natural wear and tear.
Customer Support: For any questions, technical assistance, or warranty claims, please contact Teamson Home customer support. Refer to the contact information provided on the product packaging or the official Teamson Home website.
You can visit the official Teamson Home store for more information and products: Teamson Home Store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.


