1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Spigen OneTap Magnetic MagSafe Car Mount (Model ITS35 ACP02618). Please read this manual thoroughly before use to ensure proper functionality and safety.
2. Safety Information
- Do not obstruct your view of the road or vehicle controls when installing the mount.
- Ensure the mount is securely attached before placing your device.
- Avoid installing the mount in areas that interfere with airbag deployment.
- Do not attempt to disassemble or modify the product.
- Keep out of reach of children.
3. Package Contents
- Spigen OneTap Magnetic MagSafe Car Mount
- Adhesive Gel Suction Pad
- Metal Plates for Cable Management (Quantity may vary)
- User Manual
4. Setup and Installation
The Spigen OneTap Car Mount can be installed on your vehicle's dashboard or windshield using its strong adhesive gel suction cup.
4.1 Choosing an Installation Location
Select a flat, clean surface on your dashboard or windshield that does not obstruct your driving view or interfere with vehicle controls or safety features.
4.2 Cleaning the Surface
Thoroughly clean the chosen surface with an alcohol wipe and allow it to dry completely. This ensures maximum adhesion of the suction cup.
4.3 Attaching the Mount
- Remove the protective film from the adhesive gel suction cup.
- Press the suction cup firmly onto the cleaned surface.
- Push down the locking lever located at the base of the mount to secure it in place.
Figure 1: Easy application of the mount to a surface.
Figure 2: The strong adhesive gel suction cup ensures stable fixation.
5. Operating Instructions
5.1 Attaching Your Device
Ensure your device is MagSafe compatible or has a MagSafe-compatible case. Simply bring your device close to the magnetic head of the mount; the strong N52 magnets will automatically align and secure your phone.
Figure 3: Powerful N52 magnets provide a secure hold for your device.
Figure 4: Simple and quick attachment with strong magnetic force.
5.2 Adjusting the Viewing Angle
The mount features an adjustable arm and a 360-degree rotating head. Loosen the adjustment knobs on the arm and head, position your device to your preferred viewing angle (portrait or landscape), and then tighten the knobs to secure the position.
Figure 5: Fully adjustable arm and 360-degree rotating head for optimal viewing.
Figure 6: The magnetic head allows for 360-degree rotation of your device.
5.3 Cable Management
The mount includes small magnets on its back to help manage your charging cable. Use the provided metal plates to attach your charging cable neatly to the mount, preventing tangles and keeping your car interior organized. Note: This product does not support wireless charging.
Figure 7: Utilize the cable holder and metal plates for tidy cable management.
Figure 8: Animated view of attaching a charging cable to the mount.
6. Compatibility
This car mount is designed for use with MagSafe-compatible iPhones and MagSafe-compatible cases. Direct attachment to non-MagSafe devices or cases is not supported.
- Compatible iPhone Models: iPhone 14 Pro, iPhone 14 Pro Max, iPhone 14 Plus, iPhone 14, iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 Mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 Mini.
- Note: Only compatible when attaching the device directly or with a MagSafe-specific case.
- Important: This product does not support wireless charging.
Figure 9: Compatibility with MagSafe-enabled devices and cases.
7. Maintenance
- Cleaning the Suction Cup: If the suction cup loses its stickiness, rinse it with warm water and let it air dry. Do not use harsh chemicals or abrasive materials.
- General Cleaning: Wipe the mount with a soft, damp cloth to remove dust and grime.
- Storage: When not in use for extended periods, detach the mount and store it in a cool, dry place away from direct sunlight.
8. Troubleshooting
- Mount not sticking:
- Ensure the installation surface is clean, dry, and flat.
- Rinse the suction cup with water and let it air dry to restore stickiness.
- Verify the locking lever is fully engaged after pressing the suction cup.
- Phone not holding securely:
- Confirm your phone or case is MagSafe compatible.
- Ensure no foreign objects are between the phone and the magnetic head.
- Check if the phone is properly centered on the magnetic head.
- Mount feels loose:
- Tighten all adjustment knobs on the arm and head.
- Re-attach the suction cup if it has lost its grip.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Spigen |
| Model Number | ITS35 ACP02618 |
| Compatible Devices | Smartphones (MagSafe compatible iPhones) |
| Mounting Type | Dashboard and Windshield (Suction Cup) |
| Special Features | Strong N52 Magnets, 360-degree Rotation, Adjustable Arm, Cable Management (No wireless charging) |
| Product Weight | 0.1 kg |
| Material | Metal (and plastic components) |
| GTIN | 08809756644306 |
10. Warranty and Support
Spigen products are backed by a manufacturer's warranty. For specific warranty details, product support, or to report any issues, please visit the official Spigen website or contact their customer service directly. Contact information can typically be found on the product packaging or the Spigen official website.
Official Spigen Website: www.spigen.com
