OUTLAW RR 2160 Mk II Retro Stereo Receiver

Introduction

The OUTLAW RR 2160 Mk II Retro Stereo Receiver is a Class AB audio component designed to deliver high-fidelity sound with modern connectivity. This manual provides essential information for setting up, operating, and maintaining your receiver, ensuring optimal performance and longevity.

Figure 1: Front view of the RR 2160 Mk II Retro Stereo Receiver, showcasing its classic silver finish and control layout.

Setup

1. Unpacking and Placement

Carefully remove the receiver from its packaging. Place the unit on a stable, level surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight. Ensure there is sufficient space around the unit for airflow.

2. Connections

Before making any connections, ensure the receiver is powered off and unplugged from the wall outlet.

Figure 2: Rear panel of the RR 2160 Mk II, detailing the various input and output connections.

2.1. Speaker Connections

Connect your passive speakers to the "RIGHT SPEAKERS" and "LEFT SPEAKERS" terminals on the rear panel. The RR 2160 Mk II supports two pairs of speakers (A and B). Ensure correct polarity (+ to + and - to -) for optimal sound quality. Use high-quality speaker wire for best results.

2.2. Audio Inputs

• RCA Inputs: Connect analog audio sources such as CD players, tape decks, or other audio components to the "AUDIO IN 1-4" RCA jacks.
• Phono Input: For turntables, connect to the dedicated "PHONO" input. Ensure your turntable's ground wire is connected to the "PHONO GROUND" terminal to reduce hum. The receiver supports both MC (Moving Coil) and MM (Moving Magnet) cartridges, selectable via a switch.
• Digital Inputs: Utilize the "COAX 1", "COAX 2", "OPT 1", and "OPT 2" inputs for digital audio sources like Blu-ray players, game consoles, or digital audio converters.
• USB Input: Connect USB storage devices for media playback.

Figure 3: Detailed views of the Phono and RCA Audio In connections.

2.3. Network Connectivity

The RR 2160 Mk II supports both Wi-Fi and wired Ethernet connections for internet radio and streaming services. Connect the receiver to your home network via Wi-Fi or Ethernet. Use the dedicated phone app (available for iPhone and Android) to browse and play content from services like Spotify and Tidal, or access DLNA/UPnP media servers.

2.4. Power Connection

Once all audio and network connections are made, connect the supplied power cord to the AC inlet on the rear panel and then to a suitable wall outlet.

Operating Instructions

1. Power On/Off

Press the "STANDBY" button on the front panel or the remote control to power the unit on or off. The master power switch is located on the rear panel.

2. Source Selection

Use the "SOURCE" knob or the dedicated source buttons on the front panel/remote to select your desired audio input (e.g., CD, Phono, Optical 1, Internet Radio).

3. Volume Control

Adjust the master volume using the large "VOLUME" knob on the front panel or the volume buttons on the remote control.

4. Internet Radio and Streaming

The RR 2160 Mk II features Internet Radio and streaming capabilities. Connect the receiver to your home network via Wi-Fi or Ethernet. Use the dedicated phone app (available for iPhone and Android) to browse and play content from services like Spotify and Tidal, or access DLNA/UPnP media servers.

5. HD FM Tuner

Tune into your favorite FM radio stations, including HD Radio broadcasts, using the tuner controls on the front panel or remote. Ensure an FM antenna is connected for optimal reception.

Figure 4: The HD Radio Digital FM logo, indicating support for high-definition radio broadcasts.

6. Tone Controls and Bass Management

Adjust the sound to your preference using the Bass and Treble tone controls. The receiver also features selectable bass management, allowing you to optimize low-frequency output for your speaker setup and subwoofers.

7. Remote Control

The included remote control provides full functionality for operating the RR 2160 Mk II from a distance. Refer to the remote control section in the full owner's manual for a detailed button layout and functions.

Maintenance

1. Cleaning

To clean the receiver, use a soft, dry cloth. For stubborn marks, slightly dampen the cloth with water. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

2. Software Updates

Periodically check the Outlaw Audio website or the phone app for available software updates. Keeping your receiver's firmware up-to-date ensures optimal performance, new features, and bug fixes.

Troubleshooting

For more detailed troubleshooting, please refer to the comprehensive troubleshooting guide in the full owner's manual or contact Outlaw Audio support.

Specifications

• Product Dimensions: 17.1 x 15 x 5.75 inches
• Item Weight: 36 pounds
• Connectivity Technology: RCA, Wi-Fi
• Controller Type: Android (also compatible with iPhone/iPad)
• Special Feature: Streaming Capabilities via Phone App
• Compatible Devices: iPhone, Android, iPad, Tablet, DLNA, UPNP, Spotify, Tidal
• Surround Sound Channel Configuration: 2 Channel
• Color: Silver
• Wattage: 165 watts (per channel, likely)
• Number of Channels: 2

Warranty and Support

The Outlaw RR 2160 Mk II Retro Stereo Receiver comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Outlaw Audio website. Optional protection plans may be available for extended coverage.

For technical support, service, or inquiries, please contact Outlaw Audio directly. Their contact information can typically be found on their official website or in the product packaging.

What's in the Box: Owner's Manual, Power Cord, Remote Control.