Product Overview
The Skullcandy Dime in-Ear Wireless Earbuds offer a compact and lightweight audio solution. Designed for a secure fit, they provide a rich listening experience with deep bass and clear highs. These earbuds are sweat and water-resistant, making them suitable for various activities.
Key features include:
- Supreme Audio: Enjoy a full, rich listening experience with high highs and deep bass.
- Integrated Microphone: Each earbud includes a microphone, allowing for solo use during calls.
- Extended Battery Life: Up to 3.5 hours of listening time in the earbuds, with an additional 8.5 hours from the charging case, totaling 12 hours of battery life.
- Secure Fit: Engineered to stay in place during activities, with three different rubber ear tips included for a custom fit.
- Sweat and Water Resistant: IPX4 rating ensures durability against sweat and splashes.
Setup
1. Charging Your Earbuds
Before first use, fully charge your Skullcandy Dime earbuds and charging case.
- Place the earbuds into the charging case. Ensure they are properly seated to make contact with the charging pins.
- Connect the charging case to a power source using the provided USB cable.
- The earbuds take approximately 1 hour to fully charge. The carrying case takes about 6 hours to fully charge.
- A small LED indicator on each earbud will show charging status.
2. Pairing with Your Device
The Skullcandy Dime earbuds feature Bluetooth 5.2 for stable connectivity and auto-connect functionality.
- Remove both earbuds from the charging case. They will automatically enter pairing mode.
- On your device (smartphone, tablet, laptop), go to Bluetooth settings.
- Select "Skullcandy Dime" from the list of available devices.
- Once connected, you will hear an audio prompt confirming successful pairing.
- The earbuds will automatically connect to your last paired device when removed from the case.
Operating Instructions
Touch Controls
The Skullcandy Dime earbuds feature intuitive touch controls for managing music and calls.
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap the right earbud.
- Previous Track: Double tap the left earbud.
- Volume Up: Triple tap the right earbud.
- Volume Down: Triple tap the left earbud.
- Answer/End Call: Single tap on either earbud during an incoming call.
- Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
- Activate Voice Assistant: Press and hold either earbud for 3 seconds.
Using a Single Earbud
You can use either the left or right earbud independently for music or calls. Simply remove one earbud from the case, and it will automatically connect to your device.
Maintenance
Cleaning
Regular cleaning helps maintain optimal performance and hygiene.
- Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove ear tips and clean them with mild soap and water, then dry thoroughly before reattaching.
- Ensure charging contacts on both earbuds and case are clean and free of debris.
Water Resistance
The Skullcandy Dime earbuds are IPX4 water-resistant, meaning they are protected from splashing water from any direction. This makes them suitable for workouts and outdoor activities where they might encounter sweat or light rain.
- Do not submerge the earbuds in water.
- Ensure the earbuds are completely dry before placing them back into the charging case to prevent damage.
Troubleshooting
Earbuds Not Pairing/Connecting
- Ensure both earbuds are charged.
- Turn off Bluetooth on your device, then turn it back on.
- Forget "Skullcandy Dime" in your device's Bluetooth settings and attempt to re-pair.
- Place both earbuds back in the charging case, close the lid, wait a few seconds, then remove them to reset.
Only One Earbud Working
- Ensure both earbuds are charged.
- Place both earbuds back in the charging case, close the lid, and ensure the charging contacts are clean.
- Try resetting the earbuds by forgetting them in your device's Bluetooth settings and re-pairing.
Charging Issues
- Verify the charging cable is securely connected to both the case and the power source.
- Clean the charging contacts on the earbuds and inside the case.
- Ensure the charging case itself has sufficient power.
Specifications
| Feature | Detail |
|---|---|
| Brand | Skullcandy |
| Model Number | S2DMW-P740 |
| Model Name | Dime |
| Color | Orange |
| Ear Placement | In Ear |
| Connectivity Technology | Bluetooth 5.0 |
| Bluetooth Version | 5.2 |
| Bluetooth Range | 10 Meters |
| Battery Life (Earbuds) | 3.5 Hours |
| Battery Life (Charging Case) | 8.5 Hours |
| Total Battery Life | 12 Hours |
| Water Resistance Level | IPX4 (Water Resistant) |
| Control Type | Volume Control, Remote, Touch |
| Item Weight | 60 Grams |
| Audio Driver Size | 6 Millimeters |
| Noise Control | Sound Isolation |
What's in the Box
- True Wireless Earbuds
- Charging Case
- Eartips (multiple sizes)
- Charging Cable
- User Manual (this document)

Warranty and Support
The Skullcandy Dime in-Ear Wireless Earbuds come with a 1-year manufacturer's warranty. For support, please refer to the official Skullcandy website or contact their customer service.
For additional information and support, visit the official Skullcandy Store.
Product Visuals




