UPBRIGHT USB-C Charging Cable Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your UPBRIGHT USB-C charging and data sync cable. This cable is designed to provide 5V DC power for charging and facilitate data transfer for compatible devices, primarily various car jump starters and power banks.

2. Product Overview

Figure 1: UPBRIGHT USB-C to USB-A Charging Cable. The image shows the white cable coiled, with a standard USB-A connector on one end and a reversible USB-C connector on the other.

The UPBRIGHT USB-C cable features a standard USB Type-A connector on one end and a USB Type-C connector on the other. It is designed for both charging and data synchronization purposes.

• USB Type-A Connector: Connects to a power source (e.g., wall adapter, computer USB port) or a device for data transfer.
• USB Type-C Connector: Connects to your compatible car jump starter, power bank, or other USB-C enabled device for charging or data transfer.

3. Setup

To set up your UPBRIGHT USB-C charging cable:

1. Identify the USB Type-A end and the USB Type-C end of the cable.
2. For charging, connect the USB Type-A end to a compatible 5V DC power source (e.g., a USB wall charger, car charger, or computer USB port).
3. Connect the USB Type-C end to the USB-C input port on your compatible device (e.g., car jump starter, power bank).
4. For data synchronization, connect the USB Type-A end to a computer's USB port and the USB Type-C end to your device.

4. Operating Instructions

4.1 Charging Your Device

Once connected as described in the Setup section, your device should begin charging. Ensure your power source provides 5V DC output for optimal charging. The charging status is typically indicated by your device's own indicators (e.g., LED lights, screen display).

4.2 Data Synchronization

When connected to a computer, the cable facilitates data transfer between your computer and the compatible device. Follow your device's specific instructions for enabling data transfer mode, if applicable.

5. Compatibility

This UPBRIGHT USB-C cable is compatible with various devices that utilize a USB-C port for 5V DC charging and data transfer. Compatible models include, but are not limited to:

• DBPOWER DJS80 1000A Peak Portable Car Jump Starter
• TrekPow G22 1500A Peak Car Jump Starter Power Bank
• LEMSIR V8 Compact Auto Lithium Battery Jump Starter (12800mAh/47.36Wh)
• LEMSIR 1500Amps V2 QDSP 1500A Peak 12V Portable Car Lithium Jump Starter
• LEMSIR 2000Amps V2 12V Portable Car Lithium Jump Starter
• LEMSIR Model: G18 77.7Wh V1 12V 2000A 21000mAh Car Energy Jump Starter
• YABER YR800 Car Jump Starter 2500A Peak 23800mAh (5V 2A Type C input)
• Jumtop 3000A Peak 22000mAh Portable Car Jump Starter (Type-C USB Line)
• JUMTOP 2500A Peak 20800m Car Jump Starter Portable Jump Pack

Always verify the charging port and voltage requirements of your device before connecting.

6. Maintenance

To ensure the longevity and optimal performance of your UPBRIGHT USB-C cable:

• Keep the cable clean and dry. Avoid exposure to liquids or excessive moisture.
• Do not bend the cable sharply or apply excessive force to the connectors.
• Store the cable in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
• Regularly inspect the cable and connectors for any signs of damage. Discontinue use if damage is observed.

7. Troubleshooting

7.1 Device Not Charging

• Check Connections: Ensure both the USB-A and USB-C connectors are fully and securely plugged into their respective ports.
• Verify Power Source: Confirm that the USB power source (e.g., wall adapter, computer port) is active and providing 5V DC power. Try a different power source if available.
• Device Compatibility: Ensure your device is compatible with 5V DC USB-C charging.
• Inspect Cable: Check the cable for any visible damage, such as cuts, kinks, or bent pins on the connectors.

7.2 Data Synchronization Issues

• Check Connections: Ensure the cable is securely connected to both the computer and the device.
• Computer Recognition: Verify that your computer recognizes the connected device. You may need to install specific drivers for your device.
• Device Settings: Some devices require you to enable a 'data transfer' or 'file transfer' mode in their settings after connecting to a computer.
• Try Different USB Port: Connect the USB-A end to a different USB port on your computer.

8. Specifications

9. Warranty and Support

UPBRIGHT offers the following warranty for this product:

• Refund Policy: 30 days from the date of purchase.
• Exchange Policy: 24 months from the date of purchase.

For technical support, warranty claims, or further assistance, please contact UPBRIGHT customer service through your retailer or the official UPBRIGHT website.