Product Overview
The Innovair Inverter Ductless Wall Mount Mini Split System is a high-efficiency solution for both cooling and heating. Designed for optimal performance, it features advanced technology to maintain comfortable indoor temperatures while minimizing energy consumption.
- Up to 38 SEER High Efficiency with AHRI and EnergyStar Rating.
- Intelligent Defrost allows operations to operate as low as -22°F.
- 4D Air Flow allows horizontal and vertical air direction.
- Operates in either AC cooling or Heat Pump heating mode with 17 to 19 SEER Efficiency.
- Wifi Ready for easy to control access away from the system.
- Gold-Fin outdoor condenser with High Density indoor filter.
- Perfect solution for off-grid or solar projects.
- Note: Installation kit is NOT included.
Figure 1: Components of the Innovair Mini Split System, including the indoor unit, outdoor unit, remote control, and connection lines.
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your Innovair Mini Split System. It is recommended that installation be performed by a qualified HVAC professional.
Unboxing and Component Identification
Carefully unbox all components. Ensure all parts listed in the packing list are present and undamaged. The indoor unit contains the mounting bracket, copper lines, and drain line.
Figure 2: Front view of the Innovair indoor unit, showcasing its sleek design.
Figure 3: The outdoor condenser unit of the Innovair Mini Split System.
Line Evacuation and Refrigerant Release
Before releasing refrigerant, the lines must be properly evacuated to remove all air and moisture. This process typically involves using a vacuum pump for at least 15 minutes. After evacuation, seal the vacuum and monitor the pressure for approximately 15 minutes to ensure no leaks are present. Once confirmed, the refrigerant can be safely released into the system.
Figure 4: Illustrates the high efficiency of the Innovair system, contributing to lower electric bills.
Operating Instructions
Your Innovair Mini Split System offers various modes and features for customized comfort.
Basic Operation
Use the provided remote control to power on the unit and set your desired temperature. The display on the indoor unit will show the current temperature setting.
Figure 5: The Innovair remote control for adjusting settings.
Advanced Features
- Intelligent Defrost: This feature allows the unit to operate efficiently even in temperatures as low as -22°F, preventing ice buildup on the outdoor coil.
- 4D Air Flow: Adjust the horizontal and vertical air direction for optimal air distribution throughout the room.
- Wi-Fi Connectivity: The unit is Wi-Fi ready, allowing you to control it remotely via a smartphone application. This feature enables convenient temperature adjustments and mode changes from anywhere.
Figure 6: Visual representation of the Intelligent Defrost mode, showing both heating and cooling capabilities.
Figure 7: The Innovair unit demonstrating Wi-Fi connectivity and control via a smartphone app.
Maintenance
Regular maintenance ensures the efficiency and longevity of your Innovair Mini Split System.
Filter Cleaning
The indoor unit is equipped with a high-density filter. For optimal air quality and system performance, clean the air filter regularly. Refer to the detailed instructions in the full user manual for specific cleaning procedures and frequency.
Outdoor Unit Care
Keep the area around the outdoor condenser unit clear of debris, leaves, and other obstructions to ensure proper airflow. The Gold-Fin coating on the outdoor condenser provides enhanced corrosion resistance.
Troubleshooting
This section provides basic troubleshooting tips for common issues. For more complex problems, contact a certified technician.
Unit Not Turning On
- Check the power supply and ensure the unit is properly plugged in.
- Verify that the circuit breaker has not tripped.
- Ensure the remote control batteries are not depleted.
Insufficient Cooling/Heating
- Check if the air filter is clean and not obstructed.
- Ensure no objects are blocking the indoor or outdoor unit's air vents.
- Verify the temperature setting on the remote control is appropriate for the desired mode (cooling or heating).
Specifications
| Attribute | Value |
|---|---|
| Brand Name | Innovair |
| Product Dimensions | 9 x 38 x 12 inches |
| Efficiency (SEER) | 38.0 |
| Capacity | 12000 British Thermal Units |
| Installation Type | Split System |
| Part Number | EIN10H2V32 |
| Form Factor | Mini-Split |
| Special Features | Defrost, Wifi |
| Color | White |
| Voltage | 230 Volts (AC) |
| Wattage | 2500 watts |
| Refrigerant | R 410A |
Figure 8: Dimensions of the Innovair indoor unit.
Figure 9: EnergyGuide label detailing the cooling (SEER) and heating (HSPF) efficiency ratings.