1. Introduction
The Saxby IkonPRO CCT recessed LED deck light kit is a versatile and energy-efficient lighting solution designed for both indoor and outdoor applications. Featuring IP67 protection, these lights are built to withstand various weather conditions. A key feature is the CCT (Correlated Color Temperature) technology, allowing users to easily switch between warm white (3000K) and cool white (4000K) illumination by simply rotating the light head.
This manual provides essential information for the safe installation, operation, and maintenance of your IkonPRO CCT LED deck lights. Please read all instructions carefully before beginning installation.
2. Product Features
- CCT Technology: Easily switch between 3000K (warm white) and 4000K (cool white) color temperatures.
- High Performance: Optimal light output combined with energy-efficient LED technology.
- IP67 Rated: Suitable for both outdoor and indoor use, offering protection against dust and water immersion.
- Discreet Design: Low projection (1mm) and compact size (45mm diameter) for seamless integration.
- Easy Installation: Features removable heads and is designed for wiring during deck construction.
- Durable Construction: Made from polished stainless steel and clear polycarbonate.
- Long Lifespan: Average lifespan of 25,000 hours.
3. Package Contents
Please ensure all components are present and undamaged before proceeding with installation.
- 10 x 0.75W SMD LED Heads (integrated)
- 1 x 15W Power Supply Unit
- 1 x 5m Extension Cable
- 2 x 5-Way 3-Pin Looms
Image 3.1: Complete Saxby IkonPRO CCT LED Deck Light Kit with all components including the power supply, cables, and 10 light heads.
4. Safety Information
- Always disconnect power before installation, maintenance, or troubleshooting.
- Installation should be performed by a qualified electrician if you are unsure.
- Ensure all wiring connections are secure and properly insulated.
- Do not exceed the specified voltage (240 Volts AC).
- Do not modify the product in any way, as this will void the warranty and may pose a safety risk.
- Keep packaging materials away from children.
- Despite IP67 rating, avoid prolonged submersion or high-pressure water jets.
5. Setup and Installation
The IkonPRO CCT lights are designed for recessed installation in decks or similar surfaces. The heads are removable to facilitate wiring during the construction phase.
5.1 Planning the Layout
- Determine the desired locations for each of the 10 LED heads.
- Ensure the total cable length (including the 5m extension) is sufficient for your layout.
5.2 Drilling Holes
- A cut-out diameter of 32mm is required for each light head.
- Ensure a minimum void depth of 80mm is available beneath the surface for the light fitting.
5.3 Wiring
- Connect the 15W power supply unit to a suitable 240V AC mains power source.
- Connect the 5m extension cable to the power supply if needed.
- Utilize the two 5-way 3-pin looms to connect the individual LED heads to the main wiring. The removable heads allow for easier wiring access.
- Ensure all connections are tight and waterproof, especially for outdoor installations.
5.4 Inserting Light Heads
- Once wiring is complete, insert the LED heads into the drilled holes.
- The light heads have a projection of 1mm above the surface when installed.
6. Operating Instructions
The Saxby IkonPRO CCT lights feature an integrated color changing mechanism.
6.1 Changing Color Temperature (CCT)
- To change the color temperature from warm white (3000K) to cool white (4000K), gently remove the light head from its housing.
- Rotate the light head 180 degrees.
- Reinsert the light head into its housing. The color temperature will now be switched.
Image 6.1: The IkonPRO CCT light head showing warm white (left) and cool white (right) illumination options.
7. Maintenance
- Cleaning: Clean the light heads periodically with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect cables and connections for any signs of wear, damage, or corrosion, especially in outdoor environments.
- No User Serviceable Parts: The LED light source is integrated and not replaceable. Do not attempt to open the light heads.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power supply; Loose connection; Faulty power supply. | Check mains power; Verify all cable connections; Test power supply if possible. |
| Some lights are not working. | Loose connection to specific light head; Damaged light head. | Check connections for affected lights; If still not working, the light head may need replacement. |
| Color temperature is not changing. | Light head not rotated 180 degrees correctly. | Ensure the light head is fully rotated 180 degrees and reinserted properly. |
| Lights flicker. | Unstable power supply; Loose connection. | Check power source stability; Inspect all connections for tightness. |
9. Specifications
| Attribute | Value |
|---|---|
| Brand | Saxby Lighting |
| Model | IkonPRO CCT |
| Product Dimensions (L x W x H) | 0.1 x 4.5 x 8 cm (Projection x Diameter x Depth) |
| Item Weight | 1.23 Kilograms |
| Material | Stainless Steel, Polycarbonate |
| Finish Type | Polished |
| Number of Light Sources | 10 |
| Voltage | 240 Volts (AC) |
| Specific Uses | Outdoor Use |
| Special Features | Color Changing, Energy Efficient |
| Power Source | Corded Electric |
| Bulb Type | LED (SMD 0.75W integrated) |
| Energy Label | A++ |
| Luminous Flux | 410 lm |
| Color Rendering Index (CRI) | 80.00 |
| Average Lifespan | 25,000 Hours |
| IP Rating | IP67 |
10. Warranty and Support
The Saxby IkonPRO CCT LED Deck Light Kit comes with a 2-year warranty from the date of purchase, providing peace of mind against manufacturing defects.
For technical support, warranty claims, or further assistance, please contact Saxby Lighting customer service. Refer to the product packaging or the official Saxby Lighting website for the most current contact information.
Please retain your proof of purchase for warranty purposes.
